diff options
Diffstat (limited to 'src/mainboard/hp/dl145_g3/romstage.c')
| -rw-r--r-- | src/mainboard/hp/dl145_g3/romstage.c | 207 |
1 files changed, 0 insertions, 207 deletions
diff --git a/src/mainboard/hp/dl145_g3/romstage.c b/src/mainboard/hp/dl145_g3/romstage.c deleted file mode 100644 index 1b25e8cd90..0000000000 --- a/src/mainboard/hp/dl145_g3/romstage.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Tyan - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler <pdegler@rumms.uni-mannheim.de> for University of Mannheim - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle <nuessle@uni-heidelberg.de> for University of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/serverengines/pilot/pilot.h> -#include <superio/nsc/pc87417/pc87417.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1) -#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC) - -unsigned get_sbdn(unsigned bus); - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device = (ctrl->channel0[0]) >> 8; - smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/broadcom/bcm5785/early_setup.c" -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include <spd.h> -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#if 0 -#include "ipmi.c" - -static void setup_early_ipmi_serial() -{ - unsigned char result; - char channel_access[]={0x06 << 2,0x40,0x04,0x80,0x05}; - char serialmodem_conf[]={0x0c << 2,0x10,0x04,0x08,0x00,0x0f}; - char serial_mux1[]={0x0c << 2,0x12,0x04,0x06}; - char serial_mux2[]={0x0c << 2,0x12,0x04,0x03}; - char serial_mux3[]={0x0c << 2,0x12,0x04,0x07}; - -// earlydbg(0x0d); - //set channel access system only - ipmi_request(5,channel_access); -// earlydbg(result); -/* - //Set serial/modem config - result = ipmi_request(6,serialmodem_conf); - earlydbg(result); - - //Set serial mux 1 - result = ipmi_request(4,serial_mux1); - earlydbg(result); - - //Set serial mux 2 - result = ipmi_request(4,serial_mux2); - earlydbg(result); - - //Set serial mux 3 - result = ipmi_request(4,serial_mux3); - earlydbg(result); -*/ -// earlydbg(0x0e); - -} -#endif - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // first node - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // second node - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - bcm5785_enable_lpc(); - pc87417_enable_dev(RTC_DEV); /* Enable RTC */ - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -// setup_early_ipmi_serial(); - pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - bcm5785_early_setup(); - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x %08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x %08x\n", msr.hi, msr.lo); - } -#endif - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ - // init_timer(); // Need to use TMICT to synchronize FID/VID - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} |