2 files changed, 122 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/variants/primus/Makefile.inc b/src/mainboard/google/brya/variants/primus/Makefile.inc
new file mode 100644
index 0000000000..8fe978f6ef
--- /dev/null
+++ b/src/mainboard/google/brya/variants/primus/Makefile.inc
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+bootblock-y += gpio.c
+
+ramstage-y += gpio.c
diff --git a/src/mainboard/google/brya/variants/primus/gpio.c b/src/mainboard/google/brya/variants/primus/gpio.c
new file mode 100644
index 0000000000..2825c23943
--- /dev/null
+++ b/src/mainboard/google/brya/variants/primus/gpio.c
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+#include <soc/gpio.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+
+/* Pad configuration in ramstage */
+static const struct pad_config override_gpio_table[] = {
+	/* A6  : ESPI_ALERT1# ==> NC */
+	PAD_NC(GPP_A6, NONE),
+	/* A14 : USB_OC1# ==> NC */
+	PAD_NC(GPP_A14, NONE),
+	/* A15 : USB_OC2# ==> NC */
+	PAD_NC(GPP_A15, NONE),
+	/* A21 : DDPC_CTRCLK ==> NC */
+	PAD_NC(GPP_A21, NONE),
+	/* A22 : DDPC_CTRLDATA ==> NC */
+	PAD_NC(GPP_A22, NONE),
+
+	/* B3  : PROC_GP2 ==> eMMC_PERST_L */
+	PAD_CFG_GPO(GPP_B3, 1, DEEP),
+
+	/* D3  : ISH_GP3 ==> NC */
+	PAD_NC(GPP_D3, NONE),
+	/* D5  : SRCCLKREQ0# ==> SSD_CLKREQ_ODL */
+	PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1),
+	/* D6  : SRCCLKREQ1# ==> NC */
+	PAD_NC(GPP_D6, NONE),
+	/* D13 : ISH_UART0_RXD ==> NC */
+	PAD_NC(GPP_D13, NONE),
+	/* D14 : ISH_UART0_TXD ==> NC */
+	PAD_NC(GPP_D14, NONE),
+
+	/* E3  : PROC_GP0 ==> NC */
+	PAD_NC(GPP_E3, NONE),
+	/* E7  : PROC_GP1 ==> NC */
+	PAD_NC(GPP_E7, NONE),
+	/* E10 : THC0_SPI1_CS# ==> NC */
+	PAD_NC(GPP_E10, NONE),
+	/* E17 : THC0_SPI1_INT# ==> NC */
+	PAD_NC(GPP_E17, NONE),
+
+	/* F19 : SRCCLKREQ6# ==> EMMC_CLKREQ_ODL */
+	PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
+	/* F20 : EXT_PWR_GATE# ==> NC */
+	PAD_NC(GPP_F20, NONE),
+
+	/* H19 : SRCCLKREQ4# ==> NC */
+	PAD_NC(GPP_H19, NONE),
+	/* H21 : IMGCLKOUT2 ==> NC */
+	PAD_NC(GPP_H21, NONE),
+	/* H22 : IMGCLKOUT3 ==> NC */
+	PAD_NC(GPP_H22, NONE),
+
+	/* S4 : SNDW2_CLK ==> NC */
+	PAD_NC(GPP_S4, NONE),
+	/* S5 : SNDW2_DATA ==> NC */
+	PAD_NC(GPP_S5, NONE),
+	/* S6 : SNDW3_CLK ==> NC */
+	PAD_NC(GPP_S6, NONE),
+	/* S7 : SNDW3_DATA ==> NC */
+	PAD_NC(GPP_S7, NONE),
+
+	/* T2 : GPP_T2 ==> eMMC_CFG */
+	PAD_CFG_GPI(GPP_T2, NONE, DEEP),
+
+	/* GPD11: LANPHYC ==> NC */
+	PAD_NC(GPD11, NONE),
+};
+
+/* Early pad configuration in bootblock */
+static const struct pad_config early_gpio_table[] = {
+	/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
+	/* B7  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
+	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
+	/* B8  : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
+	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
+	/*
+	 * D1  : ISH_GP1 ==> FP_RST_ODL
+	 * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
+	 * To ensure proper power sequencing for the FPMCU device, reset signal is driven low
+	 * early on in bootblock, followed by enabling of power. Reset signal is deasserted
+	 * later on in ramstage. Since reset signal is asserted in bootblock, it results in
+	 * FPMCU not working after a S3 resume. This is a known issue.
+	 */
+	PAD_CFG_GPO(GPP_D1, 0, DEEP),
+	/* D2  : ISH_GP2 ==> EN_FP_PWR */
+	PAD_CFG_GPO(GPP_D2, 1, DEEP),
+	/* E0  : SATAXPCIE0 ==> WWAN_PERST_L */
+	PAD_CFG_GPO(GPP_E0, 0, DEEP),
+	/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
+	PAD_CFG_GPI(GPP_E13, NONE, DEEP),
+	/* E16 : RSVD_TP ==> WWAN_RST_L */
+	PAD_CFG_GPO(GPP_E16, 0, DEEP),
+	/* E15 : RSVD_TP ==> PCH_WP_OD */
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
+	/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
+	PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
+	/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
+	PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
+	/* H13 : I2C7_SCL ==> EN_PP3300_SD */
+	PAD_NC(GPP_H13, UP_20K),
+};
+
+const struct pad_config *variant_gpio_override_table(size_t *num)
+{
+	*num = ARRAY_SIZE(override_gpio_table);
+	return override_gpio_table;
+}
+
+const struct pad_config *variant_early_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(early_gpio_table);
+	return early_gpio_table;
+}