3 files changed, 124 insertions, 0 deletions

diff --git a/src/mainboard/google/rush/romstage.c b/src/mainboard/google/rush/romstage.c
index 7c01a30604..8edcba8d6a 100644
--- a/src/mainboard/google/rush/romstage.c
+++ b/src/mainboard/google/rush/romstage.c
@@ -51,6 +51,35 @@ void mainboard_init_tpm_i2c(void)
 	configure_tpm_i2c_bus();
 }
 
+void mainboard_init_ec_spi(void)
+{
+	clock_enable_clear_reset(0, CLK_H_SBC1, 0, 0, 0, 0);
+
+	// SPI1 MOSI
+	pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 |
+						 PINMUX_PULL_NONE |
+						 PINMUX_INPUT_ENABLE);
+	// SPI1 MISO
+	pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 |
+						 PINMUX_PULL_NONE |
+						 PINMUX_INPUT_ENABLE);
+	// SPI1 SCLK
+	pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 |
+						 PINMUX_PULL_NONE |
+						 PINMUX_INPUT_ENABLE);
+	// SPI1 CS0
+	pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 |
+						 PINMUX_PULL_NONE |
+						 PINMUX_INPUT_ENABLE);
+
+	clock_configure_source(sbc1, CLK_M, 500);
+}
+
+void mainboard_init_ec_i2c(void)
+{
+	/* Empty - Rush uses SPI to communicate with the EC */
+}
+
 void mainboard_configure_pmc(void)
 {
 }
diff --git a/src/mainboard/google/rush_ryu/mainboard.c b/src/mainboard/google/rush_ryu/mainboard.c
index dff5954466..140ca5f63e 100644
--- a/src/mainboard/google/rush_ryu/mainboard.c
+++ b/src/mainboard/google/rush_ryu/mainboard.c
@@ -20,8 +20,53 @@
 #include <device/device.h>
 #include <boot/coreboot_tables.h>
 
+#include <soc/clock.h>
+#include <soc/nvidia/tegra132/clk_rst.h>
+#include <soc/nvidia/tegra132/pinmux.h>
+#include <soc/addressmap.h>
+
+static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE;
+
+static void init_mmc(void)
+{
+	clock_configure_source(sdmmc4, PLLP, 48000);
+
+	uint32_t pin_up = PINMUX_PULL_UP | PINMUX_INPUT_ENABLE,
+		 pin_none = PINMUX_PULL_NONE | PINMUX_INPUT_ENABLE;
+
+	// MMC4 (eMMC)
+	pinmux_set_config(PINMUX_SDMMC4_CLK_INDEX,
+			  PINMUX_SDMMC4_CLK_FUNC_SDMMC4 | pin_none);
+	pinmux_set_config(PINMUX_SDMMC4_CMD_INDEX,
+			  PINMUX_SDMMC4_CMD_FUNC_SDMMC4 | pin_up);
+	pinmux_set_config(PINMUX_SDMMC4_DAT0_INDEX,
+			  PINMUX_SDMMC4_DAT0_FUNC_SDMMC4 | pin_up);
+	pinmux_set_config(PINMUX_SDMMC4_DAT1_INDEX,
+			  PINMUX_SDMMC4_DAT1_FUNC_SDMMC4 | pin_up);
+	pinmux_set_config(PINMUX_SDMMC4_DAT2_INDEX,
+			  PINMUX_SDMMC4_DAT2_FUNC_SDMMC4 | pin_up);
+	pinmux_set_config(PINMUX_SDMMC4_DAT3_INDEX,
+			  PINMUX_SDMMC4_DAT3_FUNC_SDMMC4 | pin_up);
+	pinmux_set_config(PINMUX_SDMMC4_DAT4_INDEX,
+			  PINMUX_SDMMC4_DAT4_FUNC_SDMMC4 | pin_up);
+	pinmux_set_config(PINMUX_SDMMC4_DAT5_INDEX,
+			  PINMUX_SDMMC4_DAT5_FUNC_SDMMC4 | pin_up);
+	pinmux_set_config(PINMUX_SDMMC4_DAT6_INDEX,
+			  PINMUX_SDMMC4_DAT6_FUNC_SDMMC4 | pin_up);
+	pinmux_set_config(PINMUX_SDMMC4_DAT7_INDEX,
+			  PINMUX_SDMMC4_DAT7_FUNC_SDMMC4 | pin_up);
+}
+
+static void setup_ec_i2c(void)
+{
+}
+
 static void mainboard_init(device_t dev)
 {
+	clock_enable_clear_reset(CLK_L_SDMMC4, 0, 0, 0, 0, 0);
+
+	init_mmc();
+	setup_ec_i2c();
 }
 
 static void mainboard_enable(device_t dev)
diff --git a/src/mainboard/google/rush_ryu/romstage.c b/src/mainboard/google/rush_ryu/romstage.c
index 9a41247dd8..1c08718543 100644
--- a/src/mainboard/google/rush_ryu/romstage.c
+++ b/src/mainboard/google/rush_ryu/romstage.c
@@ -17,10 +17,60 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
+#include <soc/addressmap.h>
+#include <soc/clock.h>
+#include <soc/nvidia/tegra/i2c.h>
+#include <soc/nvidia/tegra132/pinmux.h>
+#include <soc/nvidia/tegra132/gpio.h>
 #include <soc/romstage.h>
 
+static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE;
+
+static void configure_tpm_i2c_bus(void)
+{
+	clock_configure_i2c_scl_freq(i2c3, PLLP, 19);
+	i2c_init(2);
+}
+
+static void configure_ec_i2c_bus(void)
+{
+	clock_configure_i2c_scl_freq(i2c2, PLLP, 100);
+	i2c_init(1);
+}
+
 void mainboard_init_tpm_i2c(void)
 {
+	clock_enable_clear_reset(0, 0, CLK_U_I2C3, 0, 0, 0);
+
+	gpio_output(GPIO(I5), 1);
+
+	/* I2C3 (cam) clock */
+	pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX,
+			  PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE);
+	/* I2C3 (cam) data */
+	pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX,
+			  PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE);
+
+	configure_tpm_i2c_bus();
+}
+
+void mainboard_init_ec_spi(void)
+{
+	/* Empty - Ryu uses I2C to communicate with the EC */
+}
+
+void mainboard_init_ec_i2c(void)
+{
+	clock_enable_clear_reset(0, CLK_H_I2C2, 0, 0, 0, 0);
+
+	/* I2C2 (GEN2) clock */
+	pinmux_set_config(PINMUX_GEN2_I2C_SCL_INDEX,
+			  PINMUX_GEN2_I2C_SCL_FUNC_I2C2 | PINMUX_INPUT_ENABLE);
+	/* I2C2 (GEN2) data */
+	pinmux_set_config(PINMUX_GEN2_I2C_SDA_INDEX,
+			  PINMUX_GEN2_I2C_SDA_FUNC_I2C2 | PINMUX_INPUT_ENABLE);
+
+	configure_ec_i2c_bus();
 }
 
 void mainboard_configure_pmc(void)