diff options
Diffstat (limited to 'src/mainboard/google')
-rw-r--r-- | src/mainboard/google/veyron_mickey/Kconfig | 8 | ||||
-rw-r--r-- | src/mainboard/google/veyron_mickey/chromeos.c | 10 | ||||
-rw-r--r-- | src/mainboard/google/veyron_mickey/devicetree.cb | 1 | ||||
-rw-r--r-- | src/mainboard/google/veyron_mickey/mainboard.c | 26 |
4 files changed, 19 insertions, 26 deletions
diff --git a/src/mainboard/google/veyron_mickey/Kconfig b/src/mainboard/google/veyron_mickey/Kconfig index 2337e5b546..d316b6a12c 100644 --- a/src/mainboard/google/veyron_mickey/Kconfig +++ b/src/mainboard/google/veyron_mickey/Kconfig @@ -65,14 +65,6 @@ config CONSOLE_SERIAL_UART_ADDRESS depends on DRIVERS_UART default 0xFF690000 -# FIXME(dhendrix): This is a gross hack intended to get us past -# display init which currently hangs the machine. It will be removed -# once we've re-factored the display init code to properly handle -# various types of displays. -config SKIP_DISPLAY_INIT_HACK - int - default 1 - config PMIC_BUS int default 0 diff --git a/src/mainboard/google/veyron_mickey/chromeos.c b/src/mainboard/google/veyron_mickey/chromeos.c index 7eed42e14b..2222c0e70b 100644 --- a/src/mainboard/google/veyron_mickey/chromeos.c +++ b/src/mainboard/google/veyron_mickey/chromeos.c @@ -26,13 +26,11 @@ #include "board.h" #define GPIO_WP GPIO(7, A, 6) -#define GPIO_POWER GPIO(0, A, 5) #define GPIO_RECOVERY GPIO(0, B, 1) void setup_chromeos_gpios(void) { gpio_input(GPIO_WP); - gpio_input(GPIO_POWER); gpio_input_pullup(GPIO_RECOVERY); } @@ -56,14 +54,6 @@ void fill_lb_gpios(struct lb_gpios *gpios) GPIO_MAX_NAME_LENGTH); count++; - /* Power Button: GPIO active low */ - gpios->gpios[count].port = GPIO_POWER.raw; - gpios->gpios[count].polarity = ACTIVE_LOW; - gpios->gpios[count].value = -1; - strncpy((char *)gpios->gpios[count].name, "power", - GPIO_MAX_NAME_LENGTH); - count++; - /* Developer: GPIO active high */ gpios->gpios[count].port = -1; gpios->gpios[count].polarity = ACTIVE_HIGH; diff --git a/src/mainboard/google/veyron_mickey/devicetree.cb b/src/mainboard/google/veyron_mickey/devicetree.cb index 4c2ea8f709..6d0555ad0b 100644 --- a/src/mainboard/google/veyron_mickey/devicetree.cb +++ b/src/mainboard/google/veyron_mickey/devicetree.cb @@ -22,4 +22,5 @@ chip soc/rockchip/rk3288 device cpu_cluster 0 on end register "vop_id" = "1" register "framebuffer_bits_per_pixel" = "16" + register "vop_mode" = "1" end diff --git a/src/mainboard/google/veyron_mickey/mainboard.c b/src/mainboard/google/veyron_mickey/mainboard.c index a5c40c23ca..17e4d4bfb0 100644 --- a/src/mainboard/google/veyron_mickey/mainboard.c +++ b/src/mainboard/google/veyron_mickey/mainboard.c @@ -55,16 +55,11 @@ static void configure_emmc(void) gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */ } -static void configure_codec(void) +static void configure_i2s(void) { - write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */ - i2c_init(2, 400*KHz); /* CODEC I2C */ - write32(&rk3288_grf->iomux_i2s, IOMUX_I2S); write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK); - rk808_configure_ldo(6, 1800); /* VCC18_CODEC */ - /* AUDIO IO domain 1.8V voltage selection */ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6)); rkclk_configure_i2s(12288000); @@ -77,19 +72,29 @@ static void configure_vop(void) /* lcdc(vop) iodomain select 1.8V */ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0)); - rk808_configure_switch(2, 1); /* VCC18_LCD (HDMI_AVDD_1V8) */ + rk808_configure_ldo(8, 1800); /* VCC18_LCD (HDMI_AVDD_1V8) */ rk808_configure_ldo(7, 1000); /* VDD10_LCD (HDMI_AVDD_1V0) */ rk808_configure_switch(1, 1); /* VCC33_LCD */ } +static void configure_hdmi(void) +{ + /* HDMI I2C */ + write32(&rk3288_grf->iomux_i2c5sda, IOMUX_HDMI_EDP_I2C_SDA); + write32(&rk3288_grf->iomux_i2c5scl, IOMUX_HDMI_EDP_I2C_SCL); + + gpio_output(GPIO(7, B, 3), 1); /* POWER_HDMI_ON */ +} + static void mainboard_init(device_t dev) { gpio_output(GPIO_RESET, 0); configure_usb(); configure_emmc(); - configure_codec(); + configure_i2s(); configure_vop(); + configure_hdmi(); elog_init(); elog_add_watchdog_reset(); @@ -115,3 +120,8 @@ void lb_board(struct lb_header *header) dma->range_start = (uintptr_t)_dma_coherent; dma->range_size = _dma_coherent_size; } + +void mainboard_power_on_backlight(void) +{ + return; +} |