diff options
Diffstat (limited to 'src/mainboard/google')
| -rw-r--r-- | src/mainboard/google/brya/variants/brya0/overridetree.cb | 45 |
1 files changed, 30 insertions, 15 deletions
diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb index d4653bcd0a..1f78b38267 100644 --- a/src/mainboard/google/brya/variants/brya0/overridetree.cb +++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb @@ -25,7 +25,7 @@ fw_config end field UFC 13 14 option UFC_USB 0 - option UFC_MIPI_5675 1 + option UFC_MIPI_IMX208 1 end end @@ -150,7 +150,7 @@ chip soc/intel/alderlake register "cio2_prt[0]" = "2" register "cio2_prt[1]" = "1" device generic 1 on - probe UFC UFC_MIPI_5675 + probe UFC UFC_MIPI_IMX208 end end end @@ -425,32 +425,29 @@ chip soc/intel/alderlake device i2c 2C on end end chip drivers/intel/mipi_camera - register "acpi_hid" = ""OVTI5675"" + register "acpi_hid" = ""INT3478"" register "acpi_uid" = "0" register "acpi_name" = ""CAM1"" - register "chip_name" = ""Ov 5675 Camera"" + register "chip_name" = ""imx 208 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" - register "ssdb.vcm_type" = "0x0C" - register "vcm_name" = ""VCM0"" - register "num_freq_entries" = "1" - register "link_freq[0]" = "DEFAULT_LINK_FREQ" + register "num_freq_entries" = "2" + register "link_freq[0]" = "384 * MHz" # 384 MHz + register "link_freq[1]" = "96 * MHz" # 96 MHz register "remote_name" = ""IPU0"" register "has_power_resource" = "1" #Controls - register "clk_panel.clks[0].clknum" = "IMGCLKOUT_2" - register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" - register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X register "gpio_panel.gpio[1].gpio_num" = "GPP_A17" #EN_UCAM_PWR register "gpio_panel.gpio[2].gpio_num" = "GPP_F20" #reset + register "gpio_panel.gpio[3].gpio_num" = "GPP_H21" #CLK_EN #_ON register "on_seq.ops_cnt" = "5" - register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(3, 0)" register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" @@ -458,13 +455,31 @@ chip soc/intel/alderlake #_OFF register "off_seq.ops_cnt" = "4" - register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(3, 0)" register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - device i2c 36 on - probe UFC UFC_MIPI_5675 + device i2c 10 on + probe UFC UFC_MIPI_IMX208 + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3499"" + register "acpi_uid" = "1" + register "acpi_name" = ""NVM1"" + register "chip_name" = ""GT24C16S"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\\_SB.PCI0.I2C2.CAM1.PRIC"" + + register "nvm_size" = "0x2800" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x0E" + + device i2c 50 on + probe UFC UFC_MIPI_IMX208 end end end |