summaryrefslogtreecommitdiff
path: root/src/mainboard/google
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google')
-rw-r--r--src/mainboard/google/octopus/variants/baseboard/devicetree.cb42
1 files changed, 0 insertions, 42 deletions
diff --git a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
index a19d2475e7..7aa7038fa8 100644
--- a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
@@ -24,48 +24,6 @@ chip soc/intel/apollolake
# GPIO for PERST_0 (WLAN_PE_RST)
register "prt0_gpio" = "GPIO_164"
- # EMMC TX DATA Delay 1
- # Refer to EDS-Vol2-16.33.
- # [14:8] steps of delay for HS400, each 125ps.
- # [6:0] steps of delay for SDR104/HS200, each 125ps.
- register "emmc_tx_data_cntl1" = "0x0C3A"
-
- # EMMC TX DATA Delay 2
- # Refer to EDS-Vol2-16.34.
- # [30:24] steps of delay for SDR50, each 125ps.
- # [22:16] steps of delay for DDR50, each 125ps.
- # [14:8] steps of delay for SDR25/HS50, each 125ps.
- # [6:0] steps of delay for SDR12, each 125ps.
- register "emmc_tx_data_cntl2" = "0x28272929"
-
- # EMMC RX CMD/DATA Delay 1
- # Refer to EDS-Vol2-16.35.
- # [30:24] steps of delay for SDR50, each 125ps.
- # [22:16] steps of delay for DDR50, each 125ps.
- # [14:8] steps of delay for SDR25/HS50, each 125ps.
- # [6:0] steps of delay for SDR12, each 125ps.
- register "emmc_rx_cmd_data_cntl1" = "0x003B263B"
-
- # EMMC RX CMD/DATA Delay 2
- # Refer to EDS-Vol2-16.37.
- # [17:16] stands for Rx Clock before Output Buffer
- # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
- # [6:0] steps of delay for HS200, each 125ps.
- register "emmc_rx_cmd_data_cntl2" = "0x10008"
-
- # EMMC RX STROBE Delay
- # Refer to EDS-Vol2-16.36.
- # [16] Enable Auto Tuning for HS400 Strobe Path
- # [14:8] steps of delay for HS400 Mode 1, each 125ps.
- # [6:0] steps of delay for HS400 Mode 2, each 125ps.
- register "emmc_rx_strobe_cntl" = "0x0a0a"
-
- # EMMC TX COMMAND Delay
- # Refer to EDS-Vol2-16.32.
- # [14:8] steps of delay for DDR Mode, each 125ps.
- # [6:0] steps of delay for SDR Mode, each 125ps.
- register "emmc_tx_cmd_cntl" = "0x1305"
-
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route, i.e., if this route changes then the affected GPE