diff options
Diffstat (limited to 'src/mainboard/google/volteer/variants/elemi/overridetree.cb')
| -rw-r--r-- | src/mainboard/google/volteer/variants/elemi/overridetree.cb | 130 |
1 files changed, 129 insertions, 1 deletions
diff --git a/src/mainboard/google/volteer/variants/elemi/overridetree.cb b/src/mainboard/google/volteer/variants/elemi/overridetree.cb index 31e1927a91..5ea48ad038 100644 --- a/src/mainboard/google/volteer/variants/elemi/overridetree.cb +++ b/src/mainboard/google/volteer/variants/elemi/overridetree.cb @@ -1,5 +1,49 @@ chip soc/intel/tigerlake + register "TcssAuxOri" = "1" + register "DdiPort1Hpd" = "0" + register "DdiPort2Hpd" = "0" + register "IomTypeCPortPadCfg[0]" = "0x090E000A" + register "IomTypeCPortPadCfg[1]" = "0x090E000D" + + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| GSPI1 | Fingerprint MCU | + #| I2C0 | Audio | + #| I2C1 | Touchscreen | + #| I2C2 | WLAN, SAR0 | + #| I2C3 | Camera, SAR1 | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + }, + }" + device domain 0 on device ref north_xhci on chip drivers/usb/acpi @@ -76,6 +120,90 @@ chip soc/intel/tigerlake end end end + device ref i2c0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end + device ref i2c1 on + chip drivers/i2c/hid + register "generic.hid" = ""GTCH7503"" + register "generic.desc" = ""G2TOUCH Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + register "generic.reset_delay_ms" = "50" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + register "generic.enable_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 40 on end + end + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + register "probed" = "1" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + register "reset_delay_ms" = "100" + register "reset_off_delay_ms" = "5" + register "has_power_resource" = "1" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + register "enable_delay_ms" = "10" + register "enable_off_delay_ms" = "1" + device i2c 10 on end + end + end + device ref i2c5 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" + register "wake" = "GPE0_DW2_15" + register "probed" = "1" + device i2c 15 on end + end + end + device ref hda on + chip drivers/generic/max98357a + register "hid" = ""MX98357A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end + device ref pmc hidden + # The pmc_mux chip driver is a placeholder for the + # PMC.MUX device in the ACPI hierarchy. + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "9" + register "usb3_port_number" = "1" + # SBU & HSL follow CC + device generic 0 on end + end + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "4" + register "usb3_port_number" = "2" + # SBU is fixed, HSL follows CC + register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" + device generic 1 on end + end + end + end + end # PMC end - end |