1 files changed, 0 insertions, 99 deletions
diff --git a/src/mainboard/google/rush/bootblock.c b/src/mainboard/google/rush/bootblock.c
deleted file mode 100644
index 2786f72e5b..0000000000
--- a/src/mainboard/google/rush/bootblock.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <arch/io.h>
-#include <bootblock_common.h>
-#include <console/console.h>
-#include <device/i2c.h>
-#include <soc/addressmap.h>
-#include <soc/clk_rst.h>
-#include <soc/clock.h>
-#include <soc/funitcfg.h>
-#include <soc/nvidia/tegra/i2c.h>
-#include <soc/padconfig.h>
-#include <soc/spi.h>	/* FIXME: move back to soc code? */
-
-#include "pmic.h"
-
-static const struct pad_config uart_console_pads[] = {
-	/* UARTA: tx and rx. */
-	PAD_CFG_SFIO(KB_ROW9, PINMUX_PULL_NONE, UA3),
-	PAD_CFG_SFIO(KB_ROW10, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, UA3),
-	/*
-	 * Disable UART2 pads as they are default connected to UARTA controller.
-	 */
-	PAD_CFG_UNUSED(UART2_RXD),
-	PAD_CFG_UNUSED(UART2_TXD),
-	PAD_CFG_UNUSED(UART2_RTS_N),
-	PAD_CFG_UNUSED(UART2_CTS_N),
-};
-
-static const struct pad_config padcfgs[] = {
-	/* Board ID bits 3:0 */
-	PAD_CFG_GPIO_INPUT(GPIO_X4_AUD, PINMUX_PULL_NONE),
-	PAD_CFG_GPIO_INPUT(GPIO_X1_AUD, PINMUX_PULL_NONE),
-	PAD_CFG_GPIO_INPUT(KB_ROW17, PINMUX_PULL_NONE),
-	PAD_CFG_GPIO_INPUT(KB_COL3, PINMUX_PULL_NONE),
-
-	/* Power Button */
-	PAD_CFG_GPIO_INPUT(KB_COL0, PINMUX_PULL_NONE),
-
-	/* Lid Open Switch */
-	PAD_CFG_GPIO_INPUT(KB_ROW4, PINMUX_PULL_UP),
-};
-
-static const struct pad_config i2cpad[] = {
-	/* PMIC i2C bus */
-	PAD_CFG_SFIO(PWR_I2C_SCL, PINMUX_INPUT_ENABLE, I2CPMU),
-	PAD_CFG_SFIO(PWR_I2C_SDA, PINMUX_INPUT_ENABLE, I2CPMU),
-};
-
-static const struct pad_config spipad[] = {
-	/* SPI fLash: mosi, miso, clk, cs0  */
-	PAD_CFG_SFIO(GPIO_PG6, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, SPI4),
-	PAD_CFG_SFIO(GPIO_PG7, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, SPI4),
-	PAD_CFG_SFIO(GPIO_PG5, PINMUX_INPUT_ENABLE, SPI4),
-	PAD_CFG_SFIO(GPIO_PI3, PINMUX_INPUT_ENABLE, SPI4),
-};
-
-static const struct funit_cfg funitcfgs[] = {
-	FUNIT_CFG(I2C5, PLLP, 400, i2cpad, ARRAY_SIZE(i2cpad)),
-	FUNIT_CFG(SBC4, PLLP, 33333, spipad, ARRAY_SIZE(spipad)),
-};
-
-void bootblock_mainboard_early_init(void)
-{
-	soc_configure_pads(uart_console_pads, ARRAY_SIZE(uart_console_pads));
-}
-
-static void set_clock_sources(void)
-{
-	/* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */
-	write32(CLK_RST_REG(clk_src_uarta), PLLP << CLK_SOURCE_SHIFT);
-}
-
-void bootblock_mainboard_init(void)
-{
-	set_clock_sources();
-
-	/* Set up the pads required to load romstage. */
-	soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs));
-	soc_configure_funits(funitcfgs, ARRAY_SIZE(funitcfgs));
-
-	i2c_init(4);
-	pmic_init(4);
-
-	tegra_spi_init(4);
-}