diff options
Diffstat (limited to 'src/mainboard/google/rambi/variants/orco/devicetree.cb')
| -rw-r--r-- | src/mainboard/google/rambi/variants/orco/devicetree.cb | 104 |
1 files changed, 0 insertions, 104 deletions
diff --git a/src/mainboard/google/rambi/variants/orco/devicetree.cb b/src/mainboard/google/rambi/variants/orco/devicetree.cb deleted file mode 100644 index c6123367f4..0000000000 --- a/src/mainboard/google/rambi/variants/orco/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Orco board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end |