diff options
Diffstat (limited to 'src/mainboard/google/puff')
85 files changed, 9189 insertions, 0 deletions
diff --git a/src/mainboard/google/puff/Kconfig b/src/mainboard/google/puff/Kconfig new file mode 100644 index 0000000000..1fe0de525a --- /dev/null +++ b/src/mainboard/google/puff/Kconfig @@ -0,0 +1,184 @@ +config BOARD_GOOGLE_BASEBOARD_PUFF + def_bool n + select BOARD_ROMSIZE_KB_16384 if !BOARD_ROMSIZE_KB_32768 + select DRIVERS_GENERIC_GPIO_KEYS + select DRIVERS_GENERIC_MAX98357A + select DRIVERS_I2C_DA7219 + select DRIVERS_I2C_GENERIC + select DRIVERS_I2C_HID + select DRIVERS_I2C_SX9310 + select DRIVERS_INTEL_DPTF + select DRIVERS_SPI_ACPI + select DRIVERS_USB_ACPI + select EC_GOOGLE_CHROMEEC + select EC_GOOGLE_CHROMEEC_BOARDID + select EC_GOOGLE_CHROMEEC_ESPI + select EC_GOOGLE_CHROMEEC_I2C_TUNNEL + select EC_GOOGLE_CHROMEEC_SKUID + select FW_CONFIG + select FW_CONFIG_SOURCE_CHROMEEC_CBI + select GOOGLE_SMBIOS_MAINBOARD_VERSION + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_LPSS_UART_FOR_CONSOLE + select MAINBOARD_HAS_CHROMEOS + select MAINBOARD_HAS_TPM2 + select MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE + select RT8168_GEN_ACPI_POWER_RESOURCE + select RT8168_GET_MAC_FROM_VPD + select RT8168_SET_LED_MODE + select SOC_INTEL_COMETLAKE_1 + select SOC_INTEL_COMMON_BLOCK_DTT + select SOC_INTEL_CSE_LITE_SKU + select SPD_CACHE_IN_FMAP + select SPD_READ_BY_WORD + select SPI_TPM + select TPM_GOOGLE_CR50 + +config BOARD_GOOGLE_AMBASSADOR + select BOARD_GOOGLE_BASEBOARD_PUFF + +config BOARD_GOOGLE_DOOLY + select BOARD_GOOGLE_BASEBOARD_PUFF + select INTEL_GMA_HAVE_VBT + +config BOARD_GOOGLE_DUFFY_LEGACY + select BOARD_GOOGLE_BASEBOARD_PUFF + select BOARD_ROMSIZE_KB_32768 + select INTEL_GMA_HAVE_VBT + +config BOARD_GOOGLE_DUFFY + select BOARD_GOOGLE_BASEBOARD_PUFF + select INTEL_GMA_HAVE_VBT + +config BOARD_GOOGLE_FAFFY + select BOARD_GOOGLE_BASEBOARD_PUFF + select INTEL_GMA_HAVE_VBT + +config BOARD_GOOGLE_GENESIS + select BOARD_GOOGLE_BASEBOARD_PUFF + +config BOARD_GOOGLE_KAISA_LEGACY + select BOARD_GOOGLE_BASEBOARD_PUFF + select BOARD_ROMSIZE_KB_32768 + select INTEL_GMA_HAVE_VBT + +config BOARD_GOOGLE_KAISA + select BOARD_GOOGLE_BASEBOARD_PUFF + select INTEL_GMA_HAVE_VBT + +config BOARD_GOOGLE_MOONBUGGY + select BOARD_GOOGLE_BASEBOARD_PUFF + +config BOARD_GOOGLE_NOIBAT + select BOARD_GOOGLE_BASEBOARD_PUFF + select INTEL_GMA_HAVE_VBT + +config BOARD_GOOGLE_PUFF + select BOARD_GOOGLE_BASEBOARD_PUFF + select BOARD_ROMSIZE_KB_32768 + select INTEL_GMA_HAVE_VBT + +config BOARD_GOOGLE_SCOUT + select BOARD_GOOGLE_BASEBOARD_PUFF + +config BOARD_GOOGLE_WYVERN + select BOARD_GOOGLE_BASEBOARD_PUFF + select INTEL_GMA_HAVE_VBT + +if BOARD_GOOGLE_BASEBOARD_PUFF + +config CHROMEOS + select EC_GOOGLE_CHROMEEC_SWITCHES + select GBB_FLAG_FORCE_DEV_BOOT_ALTFW + select GBB_FLAG_FORCE_DEV_BOOT_USB + select GBB_FLAG_FORCE_DEV_SWITCH_ON + select GBB_FLAG_FORCE_MANUAL_RECOVERY + select HAS_RECOVERY_MRC_CACHE + select VBOOT_LID_SWITCH + select CHROMEOS_CSE_BOARD_RESET_OVERRIDE + +config CHROMEOS_WIFI_SAR + bool "Enable SAR options for ChromeOS build" + depends on CHROMEOS + select DSAR_ENABLE + select GEO_SAR_ENABLE + select SAR_ENABLE + select USE_SAR + +config DEVICETREE + default "variants/baseboard/devicetree.cb" + +config DIMM_MAX + default 2 + +config DRIVER_TPM_SPI_BUS + default 0x1 + +config UART_FOR_CONSOLE + default 0 + +config FMDFILE + default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/chromeos-16MiB.fmd" if BOARD_ROMSIZE_KB_16384 && CHROMEOS + default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/chromeos-32MiB.fmd" if BOARD_ROMSIZE_KB_32768 && CHROMEOS + +config POWER_OFF_ON_CR50_UPDATE + bool + default n + +config MAINBOARD_DIR + default "google/puff" + +config MAINBOARD_FAMILY + string + default "Google_Puff" + +config MAINBOARD_PART_NUMBER + default "Ambassador" if BOARD_GOOGLE_AMBASSADOR + default "Dooly" if BOARD_GOOGLE_DOOLY + default "Duffy" if BOARD_GOOGLE_DUFFY + default "Duffy" if BOARD_GOOGLE_DUFFY_LEGACY + default "Faffy" if BOARD_GOOGLE_FAFFY + default "Genesis" if BOARD_GOOGLE_GENESIS + default "Kaisa" if BOARD_GOOGLE_KAISA + default "Kaisa" if BOARD_GOOGLE_KAISA_LEGACY + default "Moonbuggy" if BOARD_GOOGLE_MOONBUGGY + default "Noibat" if BOARD_GOOGLE_NOIBAT + default "Puff" if BOARD_GOOGLE_PUFF + default "Scout" if BOARD_GOOGLE_SCOUT + default "Wyvern" if BOARD_GOOGLE_WYVERN + +config OVERRIDE_DEVICETREE + default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" + +config TPM_TIS_ACPI_INTERRUPT + int + default 53 # GPE0_DW1_21 (GPP_C21) + +config VARIANT_DIR + default "ambassador" if BOARD_GOOGLE_AMBASSADOR + default "dooly" if BOARD_GOOGLE_DOOLY + default "duffy" if BOARD_GOOGLE_DUFFY + default "duffy" if BOARD_GOOGLE_DUFFY_LEGACY + default "faffy" if BOARD_GOOGLE_FAFFY + default "genesis" if BOARD_GOOGLE_GENESIS + default "kaisa" if BOARD_GOOGLE_KAISA + default "kaisa" if BOARD_GOOGLE_KAISA_LEGACY + default "moonbuggy" if BOARD_GOOGLE_MOONBUGGY + default "noibat" if BOARD_GOOGLE_NOIBAT + default "puff" if BOARD_GOOGLE_PUFF + default "scout" if BOARD_GOOGLE_SCOUT + default "wyvern" if BOARD_GOOGLE_WYVERN + +config VBOOT + select HAS_RECOVERY_MRC_CACHE + select VBOOT_EARLY_EC_SYNC + +config USE_PM_ACPI_TIMER + default n + +config EDK2_BOOT_TIMEOUT + int + default 5 + +endif # BOARD_GOOGLE_BASEBOARD_PUFF diff --git a/src/mainboard/google/puff/Kconfig.name b/src/mainboard/google/puff/Kconfig.name new file mode 100644 index 0000000000..5e2a365d39 --- /dev/null +++ b/src/mainboard/google/puff/Kconfig.name @@ -0,0 +1,40 @@ +comment "Puff" + +config BOARD_GOOGLE_AMBASSADOR + bool "-> Ambassador" + +config BOARD_GOOGLE_DOOLY + bool "-> Dooly" + +config BOARD_GOOGLE_DUFFY_LEGACY + bool "-> Duffy Legacy (32MB)" + +config BOARD_GOOGLE_DUFFY + bool "-> Duffy (ASUS Chromebox 4)" + +config BOARD_GOOGLE_FAFFY + bool "-> Faffy (ASUS Fanless Chromebox)" + +config BOARD_GOOGLE_GENESIS + bool "-> Genesis" + +config BOARD_GOOGLE_KAISA_LEGACY + bool "-> Kaisa Legacy (32MB)" + +config BOARD_GOOGLE_KAISA + bool "-> Kaisa (Acer Chromebox CXI4)" + +config BOARD_GOOGLE_MOONBUGGY + bool "-> Moonbuggy" + +config BOARD_GOOGLE_NOIBAT + bool "-> Noibat (HP Chromebox G3)" + +config BOARD_GOOGLE_PUFF + bool "-> Puff" + +config BOARD_GOOGLE_SCOUT + bool "-> Scout" + +config BOARD_GOOGLE_WYVERN + bool "-> Wyvern (CTL Chromebox CBx2)" diff --git a/src/mainboard/google/puff/Makefile.inc b/src/mainboard/google/puff/Makefile.inc new file mode 100644 index 0000000000..12d4374305 --- /dev/null +++ b/src/mainboard/google/puff/Makefile.inc @@ -0,0 +1,20 @@ +## SPDX-License-Identifier: GPL-2.0-only + +bootblock-y += bootblock.c +bootblock-$(CONFIG_CHROMEOS) += chromeos.c + +ramstage-y += ramstage.c +ramstage-$(CONFIG_CHROMEOS) += chromeos.c +ramstage-$(CONFIG_EC_GOOGLE_CHROMEEC) += ec.c + +romstage-y += romstage.c +romstage-$(CONFIG_CHROMEOS) += chromeos.c + +verstage-$(CONFIG_CHROMEOS) += chromeos.c + +subdirs-y += variants/baseboard +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/baseboard/include + +VARIANT_DIR:=$(call strip_quotes,$(CONFIG_VARIANT_DIR)) +subdirs-y += variants/$(VARIANT_DIR) +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include diff --git a/src/mainboard/google/puff/board_info.txt b/src/mainboard/google/puff/board_info.txt new file mode 100644 index 0000000000..1168548e9e --- /dev/null +++ b/src/mainboard/google/puff/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Google +Board name: Puff +Category: desktop +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/google/puff/bootblock.c b/src/mainboard/google/puff/bootblock.c new file mode 100644 index 0000000000..6e2f34d10e --- /dev/null +++ b/src/mainboard/google/puff/bootblock.c @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <bootblock_common.h> +#include <soc/gpio.h> + +void bootblock_mainboard_early_init(void) +{ + const struct pad_config *variant_early_table; + size_t variant_gpios; + + variant_early_table = variant_early_gpio_table(&variant_gpios); + gpio_configure_pads(variant_early_table, variant_gpios); +} diff --git a/src/mainboard/google/puff/chromeos-16MiB.fmd b/src/mainboard/google/puff/chromeos-16MiB.fmd new file mode 100644 index 0000000000..61a0b0fbb4 --- /dev/null +++ b/src/mainboard/google/puff/chromeos-16MiB.fmd @@ -0,0 +1,44 @@ +FLASH@0xff000000 0x1000000 { + SI_ALL@0x0 0x300000 { + SI_DESC@0x0 0x1000 + SI_ME@0x1000 0x2ff000 + } + SI_BIOS@0x300000 0xd00000 { + RW_SECTION_A@0x0 0x3e8000 { + VBLOCK_A@0x0 0x10000 + FW_MAIN_A(CBFS)@0x10000 0x3d7fc0 + RW_FWID_A@0x3e7fc0 0x40 + } + RW_SECTION_B@0x3e8000 0x3e8000 { + VBLOCK_B@0x0 0x10000 + FW_MAIN_B(CBFS)@0x10000 0x3d7fc0 + RW_FWID_B@0x3e7fc0 0x40 + } + RW_MISC@0x7d0000 0x30000 { + UNIFIED_MRC_CACHE@0x0 0x20000 { + RECOVERY_MRC_CACHE@0x0 0x10000 + RW_MRC_CACHE@0x10000 0x10000 + } + RW_ELOG(PRESERVE)@0x20000 0x4000 + RW_SHARED@0x24000 0x4000 { + SHARED_DATA@0x0 0x2000 + VBLOCK_DEV@0x2000 0x2000 + } + RW_VPD(PRESERVE)@0x28000 0x2000 + RW_NVRAM(PRESERVE)@0x2a000 0x5000 + RW_SPD_CACHE(PRESERVE)@0x2f000 0x1000 + } + # RW_LEGACY needs to be minimum of 1MB + RW_LEGACY(CBFS)@0x800000 0x100000 + WP_RO@0x900000 0x400000 { + RO_VPD(PRESERVE)@0x0 0x4000 + RO_SECTION@0x4000 0x3fc000 { + FMAP@0x0 0x800 + RO_FRID@0x800 0x40 + RO_FRID_PAD@0x840 0x7c0 + GBB@0x1000 0x3000 + COREBOOT(CBFS)@0x4000 0x3f8000 + } + } + } +} diff --git a/src/mainboard/google/puff/chromeos-32MiB.fmd b/src/mainboard/google/puff/chromeos-32MiB.fmd new file mode 100644 index 0000000000..81840b1e60 --- /dev/null +++ b/src/mainboard/google/puff/chromeos-32MiB.fmd @@ -0,0 +1,48 @@ +FLASH@0xfe000000 0x2000000 { + SI_ALL@0x0 0x300000 { + SI_DESC@0x0 0x1000 + SI_ME@0x1000 0x2ff000 + } + SI_BIOS@0x300000 0x1d00000 { + # Place RW_LEGACY at the start of BIOS region such that the rest + # of BIOS regions start at 16MiB boundary. Since this is a 32MiB + # SPI flash only the top 16MiB actually gets memory mapped. + RW_LEGACY(CBFS)@0x0 0x1000000 + RW_SECTION_A@0x1000000 0x460000 { + VBLOCK_A@0x0 0x10000 + FW_MAIN_A(CBFS)@0x10000 0x44ffc0 + RW_FWID_A@0x45ffc0 0x40 + } + RW_SECTION_B@0x1460000 0x460000 { + VBLOCK_B@0x0 0x10000 + FW_MAIN_B(CBFS)@0x10000 0x44ffc0 + RW_FWID_B@0x45ffc0 0x40 + } + RW_MISC@0x18c0000 0x40000 { + UNIFIED_MRC_CACHE(PRESERVE)@0x0 0x30000 { + RECOVERY_MRC_CACHE@0x0 0x10000 + RW_MRC_CACHE@0x10000 0x20000 + } + RW_ELOG(PRESERVE)@0x30000 0x4000 + RW_SHARED@0x34000 0x4000 { + SHARED_DATA@0x0 0x2000 + VBLOCK_DEV@0x2000 0x2000 + } + RW_VPD(PRESERVE)@0x38000 0x2000 + RW_NVRAM(PRESERVE)@0x3a000 0x5000 + RW_SPD_CACHE(PRESERVE)@0x3f000 0x1000 + } + # Make WP_RO region align with SPI vendor + # memory protected range specification. + WP_RO@0x1900000 0x400000 { + RO_VPD(PRESERVE)@0x0 0x4000 + RO_SECTION@0x4000 0x3fc000 { + FMAP@0x0 0x800 + RO_FRID@0x800 0x40 + RO_FRID_PAD@0x840 0x7c0 + GBB@0x1000 0x3000 + COREBOOT(CBFS)@0x4000 0x3f8000 + } + } + } +} diff --git a/src/mainboard/google/puff/chromeos.c b/src/mainboard/google/puff/chromeos.c new file mode 100644 index 0000000000..9c5e19d879 --- /dev/null +++ b/src/mainboard/google/puff/chromeos.c @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootmode.h> +#include <boot/coreboot_tables.h> +#include <ec/google/chromeec/ec.h> +#include <gpio.h> +#include <variant/gpio.h> +#include <types.h> + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + struct lb_gpio chromeos_gpios[] = { + {-1, ACTIVE_HIGH, get_lid_switch(), "lid"}, + {-1, ACTIVE_HIGH, 0, "power"}, + {-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"}, + {GPIO_EC_IN_RW, ACTIVE_HIGH, gpio_get(GPIO_EC_IN_RW), + "EC in RW"}, + }; + lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios)); +} + +int get_write_protect_state(void) +{ + return gpio_get(GPIO_PCH_WP); +} + +int get_ec_is_trusted(void) +{ + /* EC is trusted if not in RW. */ + return !gpio_get(GPIO_EC_IN_RW); +} diff --git a/src/mainboard/google/puff/dsdt.asl b/src/mainboard/google/puff/dsdt.asl new file mode 100644 index 0000000000..c7a5a070d4 --- /dev/null +++ b/src/mainboard/google/puff/dsdt.asl @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi.h> +#include <variant/ec.h> +#include <variant/gpio.h> + +DefinitionBlock( + "dsdt.aml", + "DSDT", + ACPI_DSDT_REV_2, + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 +) +{ + #include <acpi/dsdt_top.asl> + #include <soc/intel/common/block/acpi/acpi/platform.asl> + #include <soc/intel/common/block/acpi/acpi/globalnvs.asl> + #include <cpu/intel/common/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <soc/intel/common/block/acpi/acpi/northbridge.asl> + #include <soc/intel/cannonlake/acpi/southbridge.asl> + } + } + + #include <southbridge/intel/common/acpi/sleepstates.asl> + + /* ChromeOS Embedded Controller */ + Scope (\_SB.PCI0.LPCB) + { + /* ACPI code for EC SuperIO functions */ + #include <ec/google/chromeec/acpi/superio.asl> + /* ACPI code for EC functions */ + #include <ec/google/chromeec/acpi/ec.asl> + } +} diff --git a/src/mainboard/google/puff/ec.c b/src/mainboard/google/puff/ec.c new file mode 100644 index 0000000000..e25abb4ede --- /dev/null +++ b/src/mainboard/google/puff/ec.c @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi.h> +#include <ec/ec.h> +#include <ec/google/chromeec/ec.h> +#include <variant/ec.h> + +void mainboard_ec_init(void) +{ + const struct google_chromeec_event_info info = { + .log_events = MAINBOARD_EC_LOG_EVENTS, + .sci_events = MAINBOARD_EC_SCI_EVENTS, + .s3_wake_events = MAINBOARD_EC_S3_WAKE_EVENTS, + .s5_wake_events = MAINBOARD_EC_S5_WAKE_EVENTS, + .s0ix_wake_events = MAINBOARD_EC_S0IX_WAKE_EVENTS, + }; + + google_chromeec_events_init(&info, acpi_is_wakeup_s3()); +} diff --git a/src/mainboard/google/puff/ramstage.c b/src/mainboard/google/puff/ramstage.c new file mode 100644 index 0000000000..ff466a34a8 --- /dev/null +++ b/src/mainboard/google/puff/ramstage.c @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <ec/ec.h> +#include <soc/gpio.h> +#include <soc/ramstage.h> +#include <variant/gpio.h> + +void mainboard_silicon_init_params(FSPS_UPD *supd) +{ + variant_devtree_update(); +} + +void __weak variant_devtree_update(void) +{ + /* Override dev tree settings per board */ +} + +void __weak variant_ramstage_init(void) +{ + /* Default weak implementation */ +} + +void __weak variant_mainboard_enable(struct device *dev) +{ + /* Override mainboard settings per board */ +} + +static void mainboard_init(struct device *dev) +{ + mainboard_ec_init(); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + variant_mainboard_enable(dev); +} + +static void mainboard_chip_init(void *chip_info) +{ + const struct pad_config *base_table; + const struct pad_config *override_table; + size_t base_gpios; + size_t override_gpios; + + base_table = base_gpio_table(&base_gpios); + override_table = override_gpio_table(&override_gpios); + + gpio_configure_pads_with_override(base_table, + base_gpios, + override_table, + override_gpios); + + variant_ramstage_init(); +} + +struct chip_operations mainboard_ops = { + .init = mainboard_chip_init, + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/google/puff/romstage.c b/src/mainboard/google/puff/romstage.c new file mode 100644 index 0000000000..3d84e52448 --- /dev/null +++ b/src/mainboard/google/puff/romstage.c @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <console/console.h> +#include <soc/cnl_memcfg_init.h> +#include <soc/romstage.h> +#include <spd_bin.h> +#include <spd_cache.h> + +void mainboard_memory_init_params(FSPM_UPD *memupd) +{ + struct cnl_mb_cfg memcfg; + variant_memory_params(&memcfg); + + /* Read spd block to get memory config */ + struct spd_block blk = { + .addr_map = { 0x50, 0x52, }, + }; + + uint8_t *spd_cache; + size_t spd_cache_sz; + bool need_update_cache = false; + bool dimm_changed = true; + + /* load spd cache from RW_SPD_CACHE */ + if (load_spd_cache(&spd_cache, &spd_cache_sz) == CB_SUCCESS) { + if (!spd_cache_is_valid(spd_cache, spd_cache_sz)) { + printk(BIOS_WARNING, "Invalid SPD cache\n"); + } else { + dimm_changed = check_if_dimm_changed(spd_cache, &blk); + if (dimm_changed && memupd->FspmArchUpd.NvsBufferPtr != 0) { + /* Set mrc_cache as invalid */ + printk(BIOS_INFO, "Set mrc_cache as invalid\n"); + memupd->FspmArchUpd.NvsBufferPtr = 0; + } + } + need_update_cache = true; + } + + if (!dimm_changed) { + spd_fill_from_cache(spd_cache, &blk); + } else { + /* Access memory info through SMBUS. */ + get_spd_smbus(&blk); + + if (need_update_cache && update_spd_cache(&blk) == CB_ERR) + printk(BIOS_WARNING, "update SPD cache failed\n"); + } + + if (blk.spd_array[0] == NULL) { + memcfg.spd[0].read_type = NOT_EXISTING; + } else { + memcfg.spd[0].read_type = READ_SPD_MEMPTR; + memcfg.spd[0].spd_spec.spd_data_ptr_info.spd_data_len = blk.len; + memcfg.spd[0].spd_spec.spd_data_ptr_info.spd_data_ptr = (uintptr_t)blk.spd_array[0]; + } + + memcfg.spd[1].read_type = NOT_EXISTING; + + if (blk.spd_array[1] == NULL) { + memcfg.spd[2].read_type = NOT_EXISTING; + } else { + memcfg.spd[2].read_type = READ_SPD_MEMPTR; + memcfg.spd[2].spd_spec.spd_data_ptr_info.spd_data_len = blk.len; + memcfg.spd[2].spd_spec.spd_data_ptr_info.spd_data_ptr = (uintptr_t)blk.spd_array[1]; + } + + memcfg.spd[3].read_type = NOT_EXISTING; + dump_spd_info(&blk); + + /* set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B. */ + memcfg.vref_ca_config = 2; + memcfg.dq_pins_interleaved = 1; + + cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg); +} diff --git a/src/mainboard/google/puff/smihandler.c b/src/mainboard/google/puff/smihandler.c new file mode 100644 index 0000000000..ceab9fa2ac --- /dev/null +++ b/src/mainboard/google/puff/smihandler.c @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#include <baseboard/variants.h> +#include <cpu/x86/smm.h> +#include <ec/google/chromeec/ec.h> +#include <ec/google/chromeec/smm.h> +#include <elog.h> +#include <intelblocks/smihandler.h> +#include <variant/ec.h> + +void mainboard_smi_espi_handler(void) +{ + chromeec_smi_process_events(); +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + const struct pad_config *pads; + size_t num; + + pads = variant_sleep_gpio_table(slp_typ, &num); + gpio_configure_pads(pads, num); + + chromeec_smi_sleep(slp_typ, MAINBOARD_EC_S3_WAKE_EVENTS, + MAINBOARD_EC_S5_WAKE_EVENTS); +} + +int mainboard_smi_apmc(u8 apmc) +{ + chromeec_smi_apmc(apmc, MAINBOARD_EC_SCI_EVENTS, + MAINBOARD_EC_SMI_EVENTS); + return 0; +} + +void elog_gsmi_cb_mainboard_log_wake_source(void) +{ + google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS | + MAINBOARD_EC_S0IX_WAKE_EVENTS); +} diff --git a/src/mainboard/google/puff/variants/ambassador/Makefile.inc b/src/mainboard/google/puff/variants/ambassador/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/ambassador/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/ambassador/gpio.c b/src/mainboard/google/puff/variants/ambassador/gpio.c new file mode 100644 index 0000000000..996edc4fc7 --- /dev/null +++ b/src/mainboard/google/puff/variants/ambassador/gpio.c @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + + /* E2 : EN_PP_MST_OD */ + PAD_CFG_GPO(GPP_E2, 1, DEEP), + /* E9 : USB_A0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/ambassador/include/variant/ec.h b/src/mainboard/google/puff/variants/ambassador/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/ambassador/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/ambassador/include/variant/gpio.h b/src/mainboard/google/puff/variants/ambassador/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/ambassador/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/ambassador/overridetree.cb b/src/mainboard/google/puff/variants/ambassador/overridetree.cb new file mode 100644 index 0000000000..b4f3609ba0 --- /dev/null +++ b/src/mainboard/google/puff/variants/ambassador/overridetree.cb @@ -0,0 +1,488 @@ +chip soc/intel/cannonlake + register "tcc_offset" = "5" # TCC of 95C + + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[6]" = "USB2_PORT_EMPTY" + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(94, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(72, 90), + TEMP_PCT(68, 80), + TEMP_PCT(64, 70), + TEMP_PCT(58, 60), + TEMP_PCT(51, 50), + TEMP_PCT(42, 40), + TEMP_PCT(35, 30),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000)" + register "policies.passive[2]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 5000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN)" + register "policies.critical[2]" = "DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 15-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 25000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Middle"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[6]" = "1" + end # RTL8111H Ethernet NIC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/baseboard/Makefile.inc b/src/mainboard/google/puff/variants/baseboard/Makefile.inc new file mode 100644 index 0000000000..e4641b977e --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/Makefile.inc @@ -0,0 +1,13 @@ +## SPDX-License-Identifier: GPL-2.0-only + +bootblock-y += gpio.c + +romstage-y += gpio.c +romstage-y += memory.c + +ramstage-y += gpio.c +ramstage-y += mainboard.c + +verstage-y += gpio.c + +smm-y += gpio.c diff --git a/src/mainboard/google/puff/variants/baseboard/devicetree.cb b/src/mainboard/google/puff/variants/baseboard/devicetree.cb new file mode 100644 index 0000000000..976d82970c --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/devicetree.cb @@ -0,0 +1,355 @@ +chip soc/intel/cannonlake + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + # DW1 is used by: + # - GPP_C1 - PCIE_14_WLAN_WAKE_ODL + # - GPP_C21 - H1_PCH_INT_ODL + register "gpe0_dw0" = "PMC_GPP_A" + register "gpe0_dw1" = "PMC_GPP_C" + register "gpe0_dw2" = "PMC_GPP_D" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + # FSP configuration + register "SkipExtGfxScan" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable[1]" = "1" + register "SataPortsDevSlp[1]" = "1" + # Configure devslp pad reset to PLT_RST + register "SataPortsDevSlpResetConfig[1]" = "SataDevSlpPlatformReset" + register "satapwroptimize" = "1" + # Enable System Agent dynamic frequency + register "SaGv" = "SaGv_Enabled" + # Enable S0ix + register "s0ix_enable" = "1" + # Enable DPTF + register "dptf_enable" = "1" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 64, + }" + register "Device4Enable" = "1" + # Enable eDP device + register "DdiPortEdp" = "1" + # Enable HPD for DDI ports B/C + register "DdiPortBHpd" = "1" + register "DdiPortCHpd" = "1" + register "tcc_offset" = "10" # TCC of 90C + # Unlock GPIO pads + register "PchUnlockGpioPads" = "1" + # SD card WP pin configuration + register "ScsSdCardWpPinEnabled" = "0" + + # NOTE: if any variant wants to override this value, use the same format + # as register "common_soc_config.pch_thermal_trip" = "value", instead of + # putting it under register "common_soc_config" in overridetree.cb file. + register "common_soc_config.pch_thermal_trip" = "77" + + # Select CPU PL2/PL4 config + register "cpu_pl2_4_cfg" = "baseline" + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 6A | 70A | 31A | 31A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.3 | 1.8 | 3.1 | 3.1 | + #| DcLoadline | 10.3 | 1.8 | 3.1 | 3.1 | + #+----------------+-------+-------+-------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1030, + .dc_loadline = 1030, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 180, + .dc_loadline = 180, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 310, + .dc_loadline = 310, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 310, + .dc_loadline = 310, + }" + + register "PchPmSlpS3MinAssert" = "2" # 50ms + register "PchPmSlpS4MinAssert" = "1" # 1s + register "PchPmSlpSusMinAssert" = "1" # 500ms + register "PchPmSlpAMinAssert" = "3" # 98ms + + # NOTE: Duration programmed in the below register should never be smaller than the + # stretch duration programmed in the following registers - + # - GEN_PMCON_A.SLP_S3_MIN_ASST_WDTH (PchPmSlpS3MinAssert) + # - GEN_PMCON_A.S4MAW (PchPmSlpS4MinAssert) + # - PM_CFG.SLP_A_MIN_ASST_WDTH (PchPmSlpAMinAssert) + # - PM_CFG.SLP_LAN_MIN_ASST_WDTH + register "PchPmPwrCycDur" = "1" # 1s + + # Enable Audio DSP oscillator qualification for S0ix + register "cppmvric2_adsposcdis" = "1" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 0 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 1 + register "usb2_ports[2]" = "USB2_PORT_SHORT(OC3)" # Type-A Port 0 + register "usb2_ports[3]" = "USB2_PORT_LONG(OC3)" # Type-A Port 1 + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # WWAN + register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # Camera + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 0 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 1 + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # WWAN + + # Enable Root port 9(x4) for NVMe. + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + # RP 9 uses CLK SRC 1 + register "PcieClkSrcUsage[1]" = "8" + # ClkReq-to-ClkSrc mapping for CLK SRC 1 + register "PcieClkSrcClkReq[1]" = "1" + + # PCIe port 14 for M.2 E-key WLAN + register "PcieRpEnable[13]" = "1" + register "PcieRpLtrEnable[13]" = "1" + # RP 14 uses CLK SRC 3 + register "PcieClkSrcUsage[3]" = "13" + register "PcieClkSrcClkReq[3]" = "3" + + #Enable I2S Audio, SSP0, SSP1 and DMIC0, default DMIC1 N/A (by variants override) + register "PchHdaDspEnable" = "1" + register "PchHdaAudioLinkSsp0" = "1" + register "PchHdaAudioLinkSsp1" = "1" + register "PchHdaAudioLinkDmic0" = "1" + register "PchHdaAudioLinkDmic1" = "0" + + # GPIO PM programming + register "gpio_override_pm" = "1" + + # GPIO community PM configuration + # Disable dynamic clock gating; with bits 0-5 set in these registers, + # some short interrupt pulses were missed (esp. cr50 irq) + register "gpio_pm[COMM_0]" = "0" + register "gpio_pm[COMM_1]" = "0" + register "gpio_pm[COMM_2]" = "0" + register "gpio_pm[COMM_3]" = "0" + register "gpio_pm[COMM_4]" = "0" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 04.0 off end # SA Thermal device + device pci 05.0 off end # SA IPU + device pci 12.0 on end # Thermal Subsystem + device pci 12.5 off end # UFS SCS + device pci 12.6 off end # GSPI #2 + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Left Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-C Port 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port 1"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.5 on end + end + chip drivers/usb/acpi + register "desc" = ""Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.6 on end + end + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" + device usb 2.9 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-C Port 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port 1"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.4 on end + end + end + end + end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.3 on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end # CNVi wifi + device pci 14.5 on end # SDCard + device pci 15.0 on end # I2C #0 + device pci 15.1 on end # I2C #1 + device pci 15.2 on end # I2C #2 + device pci 15.3 on end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 16.5 off end # Management Engine Interface 4 + device pci 17.0 on end # SATA + device pci 19.0 on end # I2C #4 + device pci 19.1 off end # I2C #5 + device pci 19.2 off end # UART #2 + device pci 1a.0 off end # eMMC + device pci 1c.0 off end # PCI Express Port 1 (USB) + device pci 1c.1 off end # PCI Express Port 2 (USB) + device pci 1c.2 off end # PCI Express Port 3 (USB) + device pci 1c.3 off end # PCI Express Port 4 (USB) + device pci 1c.4 off end # PCI Express Port 5 (USB) + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on # PCI Express Port 9 (X4 NVME) + register "PcieRpSlotImplemented[8]" = "1" + end + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1d.4 off end # PCI Express port 13 + device pci 1d.5 on + chip drivers/wifi/generic + register "wake" = "GPE0_DW1_01" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[13]" = "1" + end # PCI Express Port 14 (x4) + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 on + chip drivers/spi/acpi + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cr50"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_C21_IRQ)" + device spi 0 on end + end + end # GSPI #0 + device pci 1e.3 on end # GSPI #1 + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # eSPI Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 hidden end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/google/puff/variants/baseboard/gpio.c b/src/mainboard/google/puff/variants/baseboard/gpio.c new file mode 100644 index 0000000000..eab831aabf --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/gpio.c @@ -0,0 +1,435 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi.h> +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <types.h> +#include <vendorcode/google/chromeos/chromeos.h> + +static const struct pad_config gpio_table[] = { + /* A0 : GPP_A0 ==> NC */ + PAD_NC(GPP_A0, NONE), + /* A1 : ESPI_IO0 */ + /* A2 : ESPI_IO1 */ + /* A3 : ESPI_IO2 */ + /* A4 : ESPI_IO3 */ + /* A5 : ESPI_CS# */ + /* A6 : GPP_A6 ==> NC */ + PAD_NC(GPP_A6, NONE), + /* A7 : PP3300_SOC_A */ + PAD_NC(GPP_A7, NONE), + /* A8 : GPP_A8 ==> NC */ + PAD_NC(GPP_A8, NONE), + /* A9 : ESPI_CLK */ + /* A10 : GPP_A10 ==> NC */ + PAD_NC(GPP_A10, NONE), + /* A11 : GPP_A11 ==> NC */ + PAD_NC(GPP_A11, NONE), + /* A12 : GPP_A12 ==> NC */ + PAD_NC(GPP_A12, NONE), + /* A13 : SUSWARN_L */ + PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), + /* A14 : ESPI_RST_L */ + /* A15 : SUSACK_L */ + PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1), + /* A16 : SD_1P8_SEL => NC */ + PAD_NC(GPP_A16, NONE), + /* A17 : EN_PP3300_SD_DX */ + PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1), + /* A18 : EN_PP3300_WWAN */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A19 : WWAN_RADIO_DISABLE_1V8_ODL */ + PAD_CFG_GPO(GPP_A19, 1, DEEP), + /* A20 : WLAN_INT_L */ + PAD_CFG_GPI_APIC(GPP_A20, NONE, PLTRST, LEVEL, INVERT), + /* A21 : TRACKPAD_INT_ODL */ + PAD_CFG_GPI_IRQ_WAKE(GPP_A21, NONE, DEEP, LEVEL, INVERT), + /* A22 : FPMCU_PCH_BOOT0 */ + PAD_CFG_GPO(GPP_A22, 0, DEEP), + /* A23 : FPMCU_PCH_INT_ODL */ + PAD_CFG_GPI_IRQ_WAKE(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B0 : CORE_VID0 */ + PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1), + /* B1 : CORE_VID1 */ + PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1), + /* B2 : GPP_B2 ==> NC */ + PAD_NC(GPP_B2, NONE), + /* B3 : GPP_B3 ==> NC */ + PAD_NC(GPP_B3, NONE), + /* B4 : GPP_B4 ==> NC */ + PAD_NC(GPP_B4, NONE), + /* B5 : GPP_B5 ==> NC */ + PAD_NC(GPP_B5, NONE), + /* B6 : SRCCLKREQ1 */ + PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), + /* B7 : GPP_B7 ==> NC */ + PAD_NC(GPP_B7, NONE), + /* B8 : PCIE_14_WLAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1), + /* B9 : GPP_B9 ==> NC */ + PAD_NC(GPP_B9, NONE), + /* B10 : GPP_B10 ==> NC */ + PAD_NC(GPP_B10, NONE), + /* B11 : EXT_PWR_GATE_L */ + PAD_CFG_NF(GPP_B11, NONE, DEEP, NF1), + /* B12 : SLP_S0_L */ + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + /* B13 : PLT_RST_L */ + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* B19 : Set to NF1 to match FSP setting it to NF1, i.e., GSPI1_CS0# */ + PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1), + /* B20 : PCH_SPI_FPMCU_CLK_R */ + PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1), + /* B21 : PCH_SPI_FPMCU_MISO */ + PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1), + /* B22 : PCH_SPI_FPMCU_MOSI */ + PAD_CFG_NF(GPP_B22, NONE, DEEP, NF1), + /* B23 : GPP_B23_STRAP */ + PAD_NC(GPP_B23, NONE), + + /* C0 : GPP_C0 => NC */ + PAD_NC(GPP_C0, NONE), + /* C1 : PCIE_14_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C1, NONE, DEEP, EDGE_SINGLE), + /* C2 : GPP_C2 => NC */ + PAD_NC(GPP_C2, NONE), + /* C3 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C3, 1, DEEP), + /* C4 : TOUCHSCREEN_DIS_L */ + PAD_CFG_GPO(GPP_C4, 1, DEEP), + /* C5 : GPP_C5 => NC */ + PAD_NC(GPP_C5, NONE), + /* C6 : PEN_PDCT_OD_L */ + PAD_NC(GPP_C6, NONE), + /* C7 : PEN_IRQ_OD_L */ + PAD_NC(GPP_C7, NONE), + /* C8 : UART_PCH_RX_DEBUG_TX */ + PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), + /* C9 : UART_PCH_TX_DEBUG_RX */ + PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), + /* C10 : GPP_10 ==> GPP_C10_TP */ + PAD_NC(GPP_C10, NONE), + /* C11 : GPP_11 ==> EN_FP_RAILS */ + PAD_CFG_GPO(GPP_C11, 0, DEEP), + /* C12 : GPP_C12 ==> NC */ + PAD_NC(GPP_C12, NONE), + /* C13 : EC_PCH_INT_L */ + PAD_CFG_GPI_APIC(GPP_C13, NONE, PLTRST, LEVEL, INVERT), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 1, DEEP), + /* C15 : NC */ + PAD_NC(GPP_C15, NONE), + /* C16 : PCH_I2C_TRACKPAD_SDA */ + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), + /* C17 : PCH_I2C_TRACKPAD_SCL */ + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), + /* C18 : PCH_I2C_TOUCHSCREEN_SDA */ + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + /* C19 : PCH_I2C_TOUCHSCREEN_SCL */ + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + /* C20 : PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + + /* D0 : TP31 */ + PAD_NC(GPP_D0, NONE), + /* D1 : TP16 */ + PAD_NC(GPP_D1, NONE), + /* D2 : TP26 */ + PAD_NC(GPP_D2, NONE), + /* D3 : TP27 */ + PAD_NC(GPP_D3, NONE), + /* D4 : TP40 */ + PAD_NC(GPP_D4, NONE), + /* D5 : WWAN_CONFIG_0 */ + PAD_NC(GPP_D5, NONE), + /* D6 : WWAN_CONFIG_1 */ + PAD_NC(GPP_D6, NONE), + /* D7 : WWAN_CONFIG_2 */ + PAD_NC(GPP_D7, NONE), + /* D8 : WWAN_CONFIG_3 */ + PAD_NC(GPP_D8, NONE), + /* D9 : GPP_D9 ==> EN_PP3300_DX_TOUCHSCREEN */ + PAD_CFG_GPO(GPP_D9, 0, DEEP), + /* D10 : GPP_D10 ==> NC */ + PAD_NC(GPP_D10, NONE), + /* D11 : GPP_D11 ==> NC */ + PAD_NC(GPP_D11, NONE), + /* D12 : GPP_D12 */ + PAD_NC(GPP_D12, NONE), + /* D13 : ISH_UART_RX */ + PAD_NC(GPP_D13, NONE), + /* D14 : ISH_UART_TX */ + PAD_NC(GPP_D14, NONE), + /* D15 : TOUCHSCREEN_RST_L */ + PAD_CFG_GPO(GPP_D15, 0, DEEP), + /* D16 : USI_INT */ + PAD_CFG_GPI_APIC(GPP_D16, NONE, PLTRST, LEVEL, NONE), + /* D17 : PCH_HP_SDW_CLK */ + PAD_NC(GPP_D17, NONE), + /* D18 : PCH_HP_SDW_DAT */ + PAD_NC(GPP_D18, NONE), + /* D19 : DMIC_CLK_0_SNDW4_CLK */ + PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), + /* D20 : DMIC_DATA_0_SNDW4_DATA */ + PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), + /* D21 : GPP_D21 ==> NC */ + PAD_NC(GPP_D21, NONE), + /* D22 : GPP_D22 ==> NC */ + PAD_NC(GPP_D22, NONE), + /* D23 : SPP_MCLK */ + PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1), + + /* E0 : GPP_E0 ==> NC */ + PAD_NC(GPP_E0, NONE), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E2 : GPP_E2 ==> NC */ + PAD_NC(GPP_E2, NONE), + /* E3 : GPP_E3 ==> NC */ + PAD_NC(GPP_E3, NONE), + /* E4 : M2_SSD_PE_WAKE_ODL */ + PAD_CFG_GPI(GPP_E4, NONE, DEEP), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), + /* E6 : M2_SSD_RST_L */ + PAD_NC(GPP_E6, NONE), + /* E7 : GPP_E7 ==> NC */ + PAD_NC(GPP_E7, NONE), + /* E8 : GPP_E8 ==> NC */ + PAD_NC(GPP_E8, NONE), + /* E9 : GPP_E9 ==> NC */ + PAD_NC(GPP_E9, NONE), + /* E10 : GPP_E10 ==> NC */ + PAD_NC(GPP_E10, NONE), + /* E11 : USB_C_OC_OD USB_OC2 */ + PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), + /* E12 : USB_A_OC_OD USB_OC3 */ + PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), + /* E13 : USB_C0_DP_HPD */ + PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), + /* E14 : DDI2_HPD_ODL */ + PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), + /* E15 : DDPD_HPD2 => NC */ + PAD_NC(GPP_E15, NONE), + /* E16 : DDPE_HPD2 => NC */ + PAD_NC(GPP_E16, NONE), + /* E17 : EDP_HPD */ + PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), + /* E18 : DDPB_CTRLCLK => NC */ + PAD_NC(GPP_E18, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_CFG_GPI(GPP_E19, NONE, DEEP), + /* E20 : DDPC_CTRLCLK => NC */ + PAD_NC(GPP_E20, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_CFG_GPI(GPP_E21, NONE, DEEP), + /* E22 : DDPD_CTRLCLK => NC */ + PAD_NC(GPP_E22, NONE), + /* E23 : GPP_E23_STRAP */ + PAD_NC(GPP_E23, NONE), + + /* F0 : GPIO_WWAN_WLAN_COEX3 */ + PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1), + /* F1 : WWAN_RESET_1V8_ODL */ + PAD_CFG_GPO(GPP_F1, 1, DEEP), + /* F2 : MEM_CH_SEL */ + PAD_CFG_GPI(GPP_F2, NONE, PLTRST), + /* F3 : GPP_F3 ==> NC */ + PAD_NC(GPP_F3, NONE), + /* F4 : CNV_BRI_DT */ + PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1), + /* F5 : CNV_BRI_RSP */ + PAD_CFG_NF(GPP_F5, NONE, DEEP, NF1), + /* F6 : CNV_RGI_DT */ + PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), + /* F7 : CNV_RGI_RSP */ + PAD_CFG_NF(GPP_F7, NONE, DEEP, NF1), + /* F8 : UART_WWANTX_WLANRX_COEX1 */ + PAD_CFG_NF(GPP_F8, NONE, DEEP, NF1), + /* F9 : UART_WWANRX_WLANTX_COEX2 */ + PAD_CFG_NF(GPP_F9, NONE, DEEP, NF1), + /* F10 : GPP_F10 ==> NC */ + PAD_NC(GPP_F10, NONE), + /* F11 : PCH_MEM_STRAP2 */ + PAD_CFG_GPI(GPP_F11, NONE, PLTRST), + /* F12 : GPP_F12 ==> NC */ + PAD_NC(GPP_F12, NONE), + /* F13 : GPP_F13 ==> NC */ + PAD_NC(GPP_F13, NONE), + /* F14 : GPP_F14 ==> NC */ + PAD_NC(GPP_F14, NONE), + /* F15 : GPP_F15 ==> NC */ + PAD_NC(GPP_F15, NONE), + /* F16 : GPP_F16 ==> NC */ + PAD_NC(GPP_F16, NONE), + /* F17 : GPP_F17 ==> NC */ + PAD_NC(GPP_F17, NONE), + /* F18 : GPP_F18 ==> NC */ + PAD_NC(GPP_F18, NONE), + /* F19 : GPP_F19 ==> NC */ + PAD_NC(GPP_F19, NONE), + /* F20 : PCH_MEM_STRAP0 */ + PAD_CFG_GPI(GPP_F20, NONE, PLTRST), + /* F21 : PCH_MEM_STRAP1 */ + PAD_CFG_GPI(GPP_F21, NONE, PLTRST), + /* F22 : PCH_MEM_STRAP3 */ + PAD_CFG_GPI(GPP_F22, NONE, PLTRST), + /* F23 : GPP_F23 ==> NC */ + PAD_NC(GPP_F23, NONE), + + /* G0 : SD_CMD */ + PAD_CFG_NF(GPP_G0, NATIVE, DEEP, NF1), + /* G1 : SD_DATA0 */ + PAD_CFG_NF(GPP_G1, NATIVE, DEEP, NF1), + /* G2 : SD_DATA1 */ + PAD_CFG_NF(GPP_G2, NATIVE, DEEP, NF1), + /* G3 : SD_DATA2 */ + PAD_CFG_NF(GPP_G3, NATIVE, DEEP, NF1), + /* G4 : SD_DATA3 */ + PAD_CFG_NF(GPP_G4, NATIVE, DEEP, NF1), + /* G5 : SD_CD# */ + PAD_CFG_NF(GPP_G5, NONE, PLTRST, NF1), + /* G6 : SD_CLK */ + PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1), + /* G7 : SD_WP + * As per schematics SD host controller SD_WP pin is not connected to + * uSD card connector. In order to overcome gpio default state, ensures + * to configure gpio pin as NF1 with internal 20K pull down. + */ + PAD_CFG_NF(GPP_G7, DN_20K, DEEP, NF1), + /* + * H0 : HP_INT_L + */ + PAD_CFG_GPI_INT(GPP_H0, NONE, PLTRST, EDGE_BOTH), + /* H1 : CNV_RF_RESET_L */ + PAD_CFG_NF(GPP_H1, NONE, DEEP, NF3), + /* H2 : CNV_CLKREQ0 */ + PAD_CFG_NF(GPP_H2, NONE, DEEP, NF3), + /* H3 : GPP_H3 ==> NC */ + PAD_NC(GPP_H3, NONE), + /* H4 : PCH_I2C_PEN_SDA */ + PAD_NC(GPP_H4, NONE), + /* H5 : PCH_I2C_PEN_SCL */ + PAD_NC(GPP_H5, NONE), + /* H6 : PCH_I2C_SAR0_MST_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : PCH_I2C_SAR0_MST_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H8 : PCH_I2C_M2_AUDIO_SAR1_SDA */ + PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1), + /* H9 : PCH_I2C_M2_AUDIO_SAR1_SCL */ + PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), + /* H10 : PCH_I2C_TRACKPAD_SDA */ + PAD_NC(GPP_H10, NONE), + /* H11 : PCH_I2C_TRACKPAD_SCL */ + PAD_NC(GPP_H11, NONE), + /* H12 : GPP_H12 ==> NC */ + PAD_NC(GPP_H12, NONE), + /* H13 : GPP_H13 ==> NC */ + PAD_NC(GPP_H13, NONE), + /* H14 : GPP_H14 ==> NC */ + PAD_NC(GPP_H14, NONE), + /* H15 : GPP_H15 ==> NC */ + PAD_NC(GPP_H15, NONE), + /* H16 : GPP_H16 ==> NC */ + PAD_NC(GPP_H16, NONE), + /* H17 : TP1 */ + PAD_NC(GPP_H17, NONE), + /* H18 : CPU_C10_GATE_L */ + PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), + /* H19 : GPP_H19 ==> NC */ + PAD_NC(GPP_H19, NONE), + /* H20 : TP41 */ + PAD_NC(GPP_H20, NONE), + /* H21 : XTAL_FREQ_SEL */ + PAD_NC(GPP_H21, NONE), + /* H22 : GPP_H22 ==> NC */ + PAD_NC(GPP_H22, NONE), + /* H23 : GPP_H23_STRAP */ + PAD_NC(GPP_H23, NONE), + + /* GPD2: LAN_WAKE# ==> EC_PCH_WAKE_ODL */ + PAD_CFG_NF(GPD2, NONE, DEEP, NF1), + + /* SD card detect VGPIO */ + PAD_CFG_GPI_GPIO_DRIVER(vSD3_CD_B, NONE, DEEP), + + /* CNV_WCEN : Disable Wireless Charging */ + PAD_CFG_GPO(CNV_WCEN, 0, DEEP), +}; + +const struct pad_config *base_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* + * Default GPIO settings before entering non-S5 sleep states. + * Configure A12: FPMCU_RST_ODL as GPO before entering sleep. + * This guarantees that A12's native3 function is disabled. + * See https://review.coreboot.org/c/coreboot/+/32111 . + */ +static const struct pad_config default_sleep_gpio_table[] = { + PAD_CFG_GPO(GPP_A12, 1, DEEP), /* FPMCU_RST_ODL */ +}; + +/* + * GPIO settings before entering S5, which are same as + * default_sleep_gpio_table but also, + * turn off EN_PP3300_WWAN and FPMCU. + */ +static const struct pad_config s5_sleep_gpio_table[] = { + PAD_CFG_GPO(GPP_A12, 0, DEEP), /* FPMCU_RST_ODL */ + PAD_CFG_GPO(GPP_C11, 0, DEEP), /* PCH_FP_PWR_EN */ + PAD_CFG_GPO(GPP_A18, 0, DEEP), /* EN_PP3300_WWAN */ +}; + +const struct pad_config *__weak variant_sleep_gpio_table( + u8 slp_typ, size_t *num) +{ + if (slp_typ == ACPI_S5) { + *num = ARRAY_SIZE(s5_sleep_gpio_table); + return s5_sleep_gpio_table; + } + *num = ARRAY_SIZE(default_sleep_gpio_table); + return default_sleep_gpio_table; +} + +static const struct cros_gpio cros_gpios[] = { + CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME), + CROS_GPIO_WP_AH(GPIO_PCH_WP, CROS_GPIO_DEVICE_NAME), +}; + +DECLARE_WEAK_CROS_GPIOS(cros_gpios); + +/* Weak implementation of overrides */ +const struct pad_config *__weak override_gpio_table(size_t *num) +{ + *num = 0; + return NULL; +} + +/* Weak implementation of early gpio */ +const struct pad_config *__weak variant_early_gpio_table(size_t *num) +{ + *num = 0; + return NULL; +} diff --git a/src/mainboard/google/puff/variants/baseboard/include/baseboard/acpi/dptf.asl b/src/mainboard/google/puff/variants/baseboard/include/baseboard/acpi/dptf.asl new file mode 100644 index 0000000000..ef9b5694fa --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/include/baseboard/acpi/dptf.asl @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#define DPTF_CPU_PASSIVE 95 +#define DPTF_CPU_CRITICAL 105 +#define DPTF_CPU_ACTIVE_AC0 87 +#define DPTF_CPU_ACTIVE_AC1 85 +#define DPTF_CPU_ACTIVE_AC2 83 +#define DPTF_CPU_ACTIVE_AC3 80 +#define DPTF_CPU_ACTIVE_AC4 75 + +#define DPTF_TSR0_SENSOR_ID 0 +#define DPTF_TSR0_SENSOR_NAME "Thermal Sensor 1" +#define DPTF_TSR0_PASSIVE 65 +#define DPTF_TSR0_CRITICAL 75 +#define DPTF_TSR0_ACTIVE_AC0 50 +#define DPTF_TSR0_ACTIVE_AC1 47 +#define DPTF_TSR0_ACTIVE_AC2 45 +#define DPTF_TSR0_ACTIVE_AC3 42 +#define DPTF_TSR0_ACTIVE_AC4 39 + +#define DPTF_TSR1_SENSOR_ID 1 +#define DPTF_TSR1_SENSOR_NAME "Thermal Sensor 2" +#define DPTF_TSR1_PASSIVE 65 +#define DPTF_TSR1_CRITICAL 75 +#define DPTF_TSR1_ACTIVE_AC0 50 +#define DPTF_TSR1_ACTIVE_AC1 47 +#define DPTF_TSR1_ACTIVE_AC2 45 +#define DPTF_TSR1_ACTIVE_AC3 42 +#define DPTF_TSR1_ACTIVE_AC4 39 + +#define DPTF_ENABLE_CHARGER +#define DPTF_ENABLE_FAN_CONTROL + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ +}) + +/* DFPS: Fan Performance States */ +Name (DFPS, Package () { + 0, // Revision + /* + * TODO : Need to update this Table after characterization. + * These are initial reference values. + */ + /* Control, Trip Point, Speed, NoiseLevel, Power */ + Package () {90, 0xFFFFFFFF, 6700, 220, 2200}, + Package () {80, 0xFFFFFFFF, 5800, 180, 1800}, + Package () {70, 0xFFFFFFFF, 5000, 145, 1450}, + Package () {60, 0xFFFFFFFF, 4900, 115, 1150}, + Package () {50, 0xFFFFFFFF, 3838, 90, 900}, + Package () {40, 0xFFFFFFFF, 2904, 55, 550}, + Package () {30, 0xFFFFFFFF, 2337, 30, 300}, + Package () {20, 0xFFFFFFFF, 1608, 15, 150}, + Package () {10, 0xFFFFFFFF, 800, 10, 100}, + Package () {0, 0xFFFFFFFF, 0, 0, 50} +}) + +Name (DART, Package () { + /* Fan effect on CPU */ + 0, // Revision + Package () { + /* + * Source, Target, Weight, AC0, AC1, AC2, AC3, AC4, AC5, AC6, + * AC7, AC8, AC9 + */ + \_SB.DPTF.TFN1, \_SB.PCI0.TCPU, 100, 90, 69, 56, 46, 36, 0, 0, + 0, 0, 0 + }, + Package () { + \_SB.DPTF.TFN1, \_SB.DPTF.TSR0, 100, 90, 69, 56, 46, 36, 0, 0, + 0, 0, 0 + }, + Package () { + \_SB.DPTF.TFN1, \_SB.DPTF.TSR1, 100, 90, 69, 56, 46, 36, 0, 0, + 0, 0, 0 + } +}) + +Name (DTRT, Package () { + /* CPU Throttle Effect on CPU */ + Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 100, 50, 0, 0, 0, 0 }, + + /* CPU Throttle Effect on Ambient (TSR0) */ + Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 100, 60, 0, 0, 0, 0 }, + + /* Charger Throttle Effect on Charger (TSR1) */ + Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 100, 60, 0, 0, 0, 0 }, +}) + +Name (MPPC, Package () +{ + 0x2, /* Revision */ + Package () { /* Power Limit 1 */ + 0, /* PowerLimitIndex, 0 for Power Limit 1 */ + 3000, /* PowerLimitMinimum */ + 15000, /* PowerLimitMaximum */ + 28000, /* TimeWindowMinimum */ + 32000, /* TimeWindowMaximum */ + 200 /* StepSize */ + }, + Package () { /* Power Limit 2 */ + 1, /* PowerLimitIndex, 1 for Power Limit 2 */ + 15000, /* PowerLimitMinimum */ + 64000, /* PowerLimitMaximum */ + 28000, /* TimeWindowMinimum */ + 32000, /* TimeWindowMaximum */ + 1000 /* StepSize */ + } +}) diff --git a/src/mainboard/google/puff/variants/baseboard/include/baseboard/ec.h b/src/mainboard/google/puff/variants/baseboard/include/baseboard/ec.h new file mode 100644 index 0000000000..4760adc316 --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/include/baseboard/ec.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __BASEBOARD_EC_H__ +#define __BASEBOARD_EC_H__ + +#include <ec/google/chromeec/ec_commands.h> +#include <variant/gpio.h> + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE)) + +#define MAINBOARD_EC_SMI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)) + +/* EC can wake from S5 with lid or power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) + +/* + * EC can wake from S3 with lid or power button or key press or + * mode change event. + */ +#define MAINBOARD_EC_S3_WAKE_EVENTS \ + (MAINBOARD_EC_S5_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE)) + +#define MAINBOARD_EC_S0IX_WAKE_EVENTS \ + (MAINBOARD_EC_S3_WAKE_EVENTS | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT)) + +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC)) + +/* + * ACPI related definitions for ASL code. + */ + +/* Enable EC backed ALS device in ACPI */ +#define EC_ENABLE_ALS_DEVICE + +/* Enable EC backed PD MCU device in ACPI */ +#define EC_ENABLE_PD_MCU_DEVICE + +/* Enable LID switch and provide wake pin for EC */ +#define EC_ENABLE_LID_SWITCH +#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE + +/* Enable Tablet switch */ +#define EC_ENABLE_TBMC_DEVICE + +#define SIO_EC_MEMMAP_ENABLE /* EC Memory Map Resources */ +#define SIO_EC_HOST_ENABLE /* EC Host Interface Resources */ +#define SIO_EC_ENABLE_PS2K /* Enable PS/2 Keyboard */ + +/* Enable EC sync interrupt, EC_SYNC_IRQ is defined in baseboard/gpio.h */ +#define EC_ENABLE_SYNC_IRQ + +/* Enable EC backed Keyboard Backlight in ACPI */ +#define EC_ENABLE_KEYBOARD_BACKLIGHT + +#endif /* __BASEBOARD_EC_H__ */ diff --git a/src/mainboard/google/puff/variants/baseboard/include/baseboard/gpio.h b/src/mainboard/google/puff/variants/baseboard/include/baseboard/gpio.h new file mode 100644 index 0000000000..6c54978996 --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/include/baseboard/gpio.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef BASEBOARD_GPIO_H +#define BASEBOARD_GPIO_H + +#include <soc/gpio.h> + +#define GPIO_EC_IN_RW GPP_C22 + +#define GPIO_PCH_WP GPP_C20 + +/* EC wake pin is routed to GPD2/LAN_WAKE# on PCH */ +#define GPE_EC_WAKE GPE0_LAN_WAK + +/* eSPI virtual wire reporting */ +#define EC_SCI_GPI GPE0_ESPI + +/* EC sync irq is GPP_C13_IRQ */ +#define EC_SYNC_IRQ GPP_C13_IRQ + +#endif /* BASEBOARD_GPIO_H */ diff --git a/src/mainboard/google/puff/variants/baseboard/include/baseboard/variants.h b/src/mainboard/google/puff/variants/baseboard/include/baseboard/variants.h new file mode 100644 index 0000000000..125f7388a1 --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/include/baseboard/variants.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef BASEBOARD_VARIANTS_H +#define BASEBOARD_VARIANTS_H + +#include <soc/cnl_memcfg_init.h> +#include <soc/gpio.h> +#include <stdint.h> + +/* + * The next set of functions return the gpio table and fill in the number of + * entries for each table. The "base" GPIOs live in the "baseboard" variant, and + * the overrides live with the specific board (kohaku, kled, etc.). +*/ +const struct pad_config *base_gpio_table(size_t *num); +const struct pad_config *override_gpio_table(size_t *num); + +/* Return board specific memory configuration */ +void variant_memory_params(struct cnl_mb_cfg *bcfg); + +/* Return memory SKU for the variant */ +int variant_memory_sku(void); + +/* Return variant specific gpio pads to be configured during sleep */ +const struct pad_config *variant_sleep_gpio_table(u8 slp_typ, size_t *num); + +/* Return GPIO pads that need to be configured before ramstage */ +const struct pad_config *variant_early_gpio_table(size_t *num); + +/* Modify devictree settings during ramstage. */ +void variant_devtree_update(void); + +/* Perform variant specific initialization early on in ramstage. */ +void variant_ramstage_init(void); + +/* Perform variant specific mainboard initialization */ +void variant_mainboard_enable(struct device *dev); + +#endif /* BASEBOARD_VARIANTS_H */ diff --git a/src/mainboard/google/puff/variants/baseboard/include/puff/ec.h b/src/mainboard/google/puff/variants/baseboard/include/puff/ec.h new file mode 100644 index 0000000000..986cf61c05 --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/include/puff/ec.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __BASEBOARD_EC_H__ +#define __BASEBOARD_EC_H__ + +#include <ec/google/chromeec/ec_commands.h> +#include <variant/gpio.h> + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP)) + +#define MAINBOARD_EC_SMI_EVENTS 0 + +/* EC can wake from S5 with power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) + +/* EC can wake from S3 with power button */ +#define MAINBOARD_EC_S3_WAKE_EVENTS (MAINBOARD_EC_S5_WAKE_EVENTS) + +#define MAINBOARD_EC_S0IX_WAKE_EVENTS \ + (MAINBOARD_EC_S3_WAKE_EVENTS | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT)) + +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC)) + +/* + * ACPI related definitions for ASL code. + */ + +/* Enable cros_ec_keyb device */ +#define EC_ENABLE_MKBP_DEVICE + +/* Enable EC backed PD MCU device in ACPI */ +#define EC_ENABLE_PD_MCU_DEVICE + +/* + * Defines EC wake pin route. + * Note that GPE_EC_WAKE is defined, confusingly, as GPE_LAN_WAK which is GPD2/LAN_WAKE# + * on the PCH or as the line EC_PCH_WAKE_ODL on the schematic. + */ +#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE + +#define SIO_EC_MEMMAP_ENABLE /* EC Memory Map Resources */ +#define SIO_EC_HOST_ENABLE /* EC Host Interface Resources */ + +/* Enable EC sync interrupt, EC_SYNC_IRQ is defined in baseboard/gpio.h */ +#define EC_ENABLE_SYNC_IRQ + +#endif /* __BASEBOARD_EC_H__ */ diff --git a/src/mainboard/google/puff/variants/baseboard/mainboard.c b/src/mainboard/google/puff/variants/baseboard/mainboard.c new file mode 100644 index 0000000000..e0c344064c --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/mainboard.c @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <bootmode.h> +#include <chip.h> +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <ec/google/chromeec/ec.h> +#include <gpio.h> +#include <intelblocks/power_limit.h> +#include <soc/pci_devs.h> +#include <timer.h> + +#define GPIO_HDMI_HPD GPP_E13 +#define GPIO_DP_HPD GPP_E14 + +/* TODO: This can be moved to common directory */ +static void wait_for_hpd(gpio_t gpio, long timeout) +{ + struct stopwatch sw; + + printk(BIOS_INFO, "Waiting for HPD\n"); + stopwatch_init_msecs_expire(&sw, timeout); + while (!gpio_get(gpio)) { + if (stopwatch_expired(&sw)) { + printk(BIOS_WARNING, + "HPD not ready after %ldms. Abort.\n", timeout); + return; + } + mdelay(200); + } + printk(BIOS_INFO, "HPD ready after %lld ms\n", + stopwatch_duration_msecs(&sw)); +} + +/* + * For type-C chargers, set PL2 to 97% of max power to account for + * cable loss and FET Rdson loss in the path from the source. + */ +#define SET_PSYSPL2(w) (97 * (w) / 100) +#define PUFF_U22_PL2 (35) +#define PUFF_U62_U42_PL2 (51) +#define PUFF_CELERON_PENTIUM_PSYSPL2 (65) +#define PUFF_CORE_CPU_PSYSPL2 (90) +#define PUFF_MAX_TIME_WINDOW 6 +#define PUFF_MIN_DUTYCYCLE 4 + +/* + * mainboard_set_power_limits + * + * Set Pl2 and SysPl2 values based on detected charger. + * Values are defined below but we use U22 value for all SKUs for now. + * definitions: + * x = no value entered. Use default value in parenthesis. + * will set 0 to anything that shouldn't be set. + * n = max value of power adapter. + * +-------------+-----+---------+-----------+-------+ + * | sku_id | PL2 | PsysPL2 | PsysPL3 | PL4 | + * +-------------+-----+---------+-----------+-------+ + * | i7 U42 | 51 | 90 | x(.85PL4) | x(82) | + * | i3 U22 | 35 | 65 | x(.85PL4) | x(51) | + * +-------------+-----+---------+-----------+-------+ + * For USB C charger: + * +-------------+-----------------+---------+---------+-------+ + * | Max Power(W)| PL2 | PsysPL2 | PsysPL3 | PL4 | + * +-------------+-----+-----------+---------+---------+-------+ + * | n | min(0.97n, PL2) | 0.97n | 0.97n | 0.97n | + * +-------------+-----+-----------+---------+---------+-------+ + */ + +/* + * Psys_pmax considerations + * + * Given the hardware design in puff, the serial shunt resistor is 0.01ohm. + * The full scale of hardware PSYS signal 0.8v maps to system current 9.6A + * instead of real system power. The equation is shown below: + * PSYS = 0.8v = (0.01ohm x Iinput) x 50 (INA213, gain 50V/V) x 15k/(15k + 75k) + * Hence, Iinput (Amps) = 9.6A + * Since there is no voltage information from PSYS, different voltage input + * would map to different Psys_pmax settings: + * For Type-C 15V, the Psys_pmax sholud be 15v x 9.6A = 144W + * For Type-C 20V, the Psys_pmax should be 20v x 9.6A = 192W + * For a barral jack, the Psys_pmax should be 19v x 9.6A = 182.4W + */ +#define PSYS_IMAX 9600 +#define BJ_VOLTS_MV 19000 + +static void mainboard_set_power_limits(struct soc_power_limits_config *conf) +{ + enum usb_chg_type type; + u32 watts; + u16 volts_mv, current_ma; + u32 psyspl2 = PUFF_CELERON_PENTIUM_PSYSPL2; // default BJ value + u32 pl2 = PUFF_U22_PL2; // default PL2 for U22 + int rv = google_chromeec_get_usb_pd_power_info(&type, ¤t_ma, &volts_mv); + + struct device *dev = pcidev_path_on_root(SA_DEVFN_ROOT); + u16 mch_id = dev ? pci_read_config16(dev, PCI_DEVICE_ID) : 0xffff; + dev = pcidev_path_on_root(SA_DEVFN_IGD); + u16 igd_id = dev ? pci_read_config16(dev, PCI_DEVICE_ID) : 0xffff; + + /* use SoC default value for PsysPL3 and PL4 unless we're on USB-PD*/ + conf->tdp_psyspl3 = 0; + conf->tdp_pl4 = 0; + + if (rv == 0 && type == USB_CHG_TYPE_PD) { + /* Detected USB-PD. Base on max value of adapter */ + watts = ((u32)current_ma * volts_mv) / 1000000; + /* set psyspl2 to 90% of adapter rating */ + psyspl2 = SET_PSYSPL2(watts); + + /* Limit PL2 if the adapter is with lower capability */ + if (mch_id == PCI_DID_INTEL_CML_ULT || + mch_id == PCI_DID_INTEL_CML_ULT_6_2) + pl2 = (psyspl2 > PUFF_U62_U42_PL2) ? PUFF_U62_U42_PL2 : psyspl2; + else + pl2 = (psyspl2 > PUFF_U22_PL2) ? PUFF_U22_PL2 : psyspl2; + + conf->tdp_psyspl3 = psyspl2; + /* set max possible time window */ + conf->tdp_psyspl3_time = PUFF_MAX_TIME_WINDOW; + /* set minimum duty cycle */ + conf->tdp_psyspl3_dutycycle = PUFF_MIN_DUTYCYCLE; + /* No data about an arbitrary Type-C adapter, set pl4 conservatively. */ + conf->tdp_pl4 = psyspl2; + } else { + /* + * Input type is barrel jack, from the SKU matrix: + * 1. i3/i5/i7 SKUs use 90W BJ + * 2. Celeron and Pentium use 65W BJ (default) + */ + volts_mv = BJ_VOLTS_MV; + /* Use IGD ID to check if CPU is Core SKUs */ + if (igd_id != PCI_DID_INTEL_CML_GT1_ULT_1 && + igd_id != PCI_DID_INTEL_CML_GT2_ULT_5) { + psyspl2 = PUFF_CORE_CPU_PSYSPL2; + if (mch_id == PCI_DID_INTEL_CML_ULT || + mch_id == PCI_DID_INTEL_CML_ULT_6_2) + pl2 = PUFF_U62_U42_PL2; + } + } + /* voltage unit is milliVolts and current is in milliAmps */ + conf->psys_pmax = (u16)(((u32)PSYS_IMAX * volts_mv) / 1000000); + + conf->tdp_pl2_override = pl2; + conf->tdp_psyspl2 = psyspl2; +} + +void variant_ramstage_init(void) +{ + static const long display_timeout_ms = 3000; + struct soc_power_limits_config *soc_config; + config_t *conf = config_of_soc(); + + /* This is reconfigured back to whatever FSP-S expects by gpio_configure_pads. */ + gpio_input(GPIO_HDMI_HPD); + gpio_input(GPIO_DP_HPD); + if (display_init_required() + && !gpio_get(GPIO_HDMI_HPD) + && !gpio_get(GPIO_DP_HPD)) { + /* This has to be done before FSP-S runs. */ + if (google_chromeec_wait_for_displayport(display_timeout_ms)) + wait_for_hpd(GPIO_DP_HPD, display_timeout_ms); + } + /* Psys_pmax needs to be setup before FSP-S */ + soc_config = &conf->power_limits_config; + mainboard_set_power_limits(soc_config); +} diff --git a/src/mainboard/google/puff/variants/baseboard/memory.c b/src/mainboard/google/puff/variants/baseboard/memory.c new file mode 100644 index 0000000000..5df73333a6 --- /dev/null +++ b/src/mainboard/google/puff/variants/baseboard/memory.c @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <baseboard/gpio.h> +#include <soc/cnl_memcfg_init.h> +#include <string.h> + +static const struct cnl_mb_cfg baseboard_memcfg = { + /* Baseboard uses 121, 81 and 100 rcomp resistors */ + .rcomp_resistor = {121, 81, 100}, + + /* Baseboard Rcomp target values */ + .rcomp_targets = {100, 40, 20, 20, 26}, + + /* Set CaVref config to 2 */ + .vref_ca_config = 2, + + /* Enable Early Command Training */ + .ect = 1, +}; + +void __weak variant_memory_params(struct cnl_mb_cfg *bcfg) +{ + memcpy(bcfg, &baseboard_memcfg, sizeof(baseboard_memcfg)); +} diff --git a/src/mainboard/google/puff/variants/dooly/Makefile.inc b/src/mainboard/google/puff/variants/dooly/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/dooly/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/dooly/data.vbt b/src/mainboard/google/puff/variants/dooly/data.vbt Binary files differnew file mode 100644 index 0000000000..42fc269659 --- /dev/null +++ b/src/mainboard/google/puff/variants/dooly/data.vbt diff --git a/src/mainboard/google/puff/variants/dooly/gpio.c b/src/mainboard/google/puff/variants/dooly/gpio.c new file mode 100644 index 0000000000..37cd08cdae --- /dev/null +++ b/src/mainboard/google/puff/variants/dooly/gpio.c @@ -0,0 +1,154 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A17 : SD_VDD1_PWR_EN */ + PAD_NC(GPP_A17, NONE), + /* A18 : GPP_A18 */ + PAD_NC(GPP_A18, NONE), + /* A19 : GPP_A19 */ + PAD_NC(GPP_A19, NONE), + /* A20 : TOUCH_INT_ODL */ + PAD_CFG_GPI_IRQ_WAKE(GPP_A20, NONE, PLTRST, LEVEL, INVERT), + /* A21 : FPMCU_PCH_BOOT0 */ + PAD_NC(GPP_A21, NONE), + /* A22 : FPMCU_PCH_INT_L */ + PAD_NC(GPP_A22, NONE), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C3 : GPP_C3 */ + PAD_NC(GPP_C3, NONE), + /* C4 : GPP_C4 */ + PAD_NC(GPP_C4, NONE), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_NC(GPP_C7, NONE), + /* C11 : GPP_C11 */ + PAD_NC(GPP_C11, NONE), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + /* C18 : GPP_C18 */ + PAD_NC(GPP_C18, NONE), + /* C19 : GPP_C19 */ + PAD_NC(GPP_C19, NONE), + + /* D16 : DMIC_ON_OFF MIC_SWITCH_L */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_D16, NONE, DEEP), + + /* E2 : EN_PP_MST_OD */ + PAD_CFG_GPO(GPP_E2, 1, DEEP), + + /* F0 : GPP_F0 */ + PAD_NC(GPP_F0, NONE), + /* F1 : GPP_F1 */ + PAD_NC(GPP_F1, NONE), + /* F8 : GPP_F8 */ + PAD_NC(GPP_F8, NONE), + /* F9 : GPP_F9 */ + PAD_NC(GPP_F9, NONE), + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* G0 : SD_CMD */ + PAD_NC(GPP_G0, NONE), + /* G1 : SD_DATA0 */ + PAD_NC(GPP_G1, NONE), + /* G2 : SD_DATA1 */ + PAD_NC(GPP_G2, NONE), + /* G3 : SD_DATA2 */ + PAD_NC(GPP_G3, NONE), + /* G4 : SD_DATA3 */ + PAD_NC(GPP_G4, NONE), + /* G5 : SD_CD */ + PAD_NC(GPP_G5, NONE), + /* G6 : SD_CLK */ + PAD_NC(GPP_G6, NONE), + + /* H3 : SPK_AMP_ON */ + PAD_CFG_GPO(GPP_H3, 1, DEEP), + /* H4: LVDS_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: LVDS_SDL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H6 : PCH_I2C_TOUCH_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : PCH_I2C_TOUCH_SDL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/dooly/include/variant/ec.h b/src/mainboard/google/puff/variants/dooly/include/variant/ec.h new file mode 100644 index 0000000000..7d280c6edf --- /dev/null +++ b/src/mainboard/google/puff/variants/dooly/include/variant/ec.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +/* Enable EC backed ALS device in ACPI */ +#define EC_ENABLE_ALS_DEVICE + +#endif diff --git a/src/mainboard/google/puff/variants/dooly/include/variant/gpio.h b/src/mainboard/google/puff/variants/dooly/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/dooly/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/dooly/overridetree.cb b/src/mainboard/google/puff/variants/dooly/overridetree.cb new file mode 100644 index 0000000000..8533f024ea --- /dev/null +++ b/src/mainboard/google/puff/variants/dooly/overridetree.cb @@ -0,0 +1,470 @@ +fw_config + field AUDIO_CODEC_SOURCE 8 10 + option AUDIO_CODEC_UNPROVISIONED 0 + option AUDIO_CODEC_ALC5682 1 + option AUDIO_CODEC_ALC5682I_VS 2 + end +end + +chip soc/intel/cannonlake + + register "power_limits_config" = "{ + .tdp_pl1_override = 25, + .tdp_pl2_override = 49, + }" + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 0 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-C Port 0 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[3]" = "USB2_PORT_EMPTY" + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-C Port 1 + register "usb2_ports[5]" = "USB2_PORT_LONG(OC_SKIP)" # USB cam + register "usb2_ports[6]" = "USB2_PORT_EMPTY" + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port 0 + register "usb3_ports[4]" = "USB3_PORT_EMPTY" + register "usb3_ports[5]" = "USB3_PORT_EMPTY" + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(3)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | ALC 1015 | + #| I2C2 | Lvds | + #| I2C3 | Touchscreen | + #| I2C4 | RT5682 | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(90, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(75, 60), + TEMP_PCT(65, 50), + TEMP_PCT(45, 40), + TEMP_PCT(30, 30),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 85, 60000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 76, 60000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 105, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 78, SHUTDOWN)" + + ## Power Limits Control + # 15-25W PL1 in 1000mW increments, avg over 28-32s interval + # 40-49W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 25000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + register "controls.power_limits.pl2" = "{ + .min_power = 40000, + .max_power = 49000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port 0"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port 0"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port 1"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.2 on end + end + chip drivers/usb/acpi + device usb 2.3 off end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port 0"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port 1"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port 0"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 3.3 on end + end + chip drivers/usb/acpi + device usb 3.4 off end + end + chip drivers/usb/acpi + device usb 3.5 off end + end + end + end + end # USB xHCI + device pci 14.5 off end # SDCard + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""10EC1015"" + register "desc" = ""Realtek SPK AMP L"" + register "uid" = "0" + device i2c 28 on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1015"" + register "desc" = ""Realtek SPK AMP R"" + register "uid" = "1" + device i2c 29 on end + end + end # I2C #0 ALC1015 + device pci 15.1 off end # I2C #1 + device pci 15.2 on end # I2C #2 LVDS + device pci 15.3 on + chip drivers/i2c/hid + register "generic.hid" = ""WDHT2002"" + register "generic.desc" = ""WDT Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A20_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" + register "generic.reset_delay_ms" = "100" + register "generic.wake" = "GPE0_DW0_20" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 2c on end + end + end # I2C #3 Touchscreen + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on + probe AUDIO_CODEC_SOURCE AUDIO_CODEC_UNPROVISIONED + probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5682 + end + end + chip drivers/i2c/generic + register "hid" = ""RTL5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on + probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5682I_VS + end + end + chip drivers/generic/gpio_keys + register "name" = ""MUTE"" + register "label" = ""mic_mute_switch"" + register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_D16)" + register "key.wakeup_route" = "WAKEUP_ROUTE_DISABLED" + register "key.dev_name" = ""MMSW"" + register "key.linux_code" = "SW_MUTE_DEVICE" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""mic_mute_switch_key"" + device generic 0 on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/duffy/Makefile.inc b/src/mainboard/google/puff/variants/duffy/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/duffy/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/duffy/data.vbt b/src/mainboard/google/puff/variants/duffy/data.vbt Binary files differnew file mode 100644 index 0000000000..cda1c25d7d --- /dev/null +++ b/src/mainboard/google/puff/variants/duffy/data.vbt diff --git a/src/mainboard/google/puff/variants/duffy/gpio.c b/src/mainboard/google/puff/variants/duffy/gpio.c new file mode 100644 index 0000000000..996edc4fc7 --- /dev/null +++ b/src/mainboard/google/puff/variants/duffy/gpio.c @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + + /* E2 : EN_PP_MST_OD */ + PAD_CFG_GPO(GPP_E2, 1, DEEP), + /* E9 : USB_A0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/duffy/include/variant/ec.h b/src/mainboard/google/puff/variants/duffy/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/duffy/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/duffy/include/variant/gpio.h b/src/mainboard/google/puff/variants/duffy/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/duffy/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/duffy/overridetree.cb b/src/mainboard/google/puff/variants/duffy/overridetree.cb new file mode 100644 index 0000000000..25778f92cb --- /dev/null +++ b/src/mainboard/google/puff/variants/duffy/overridetree.cb @@ -0,0 +1,547 @@ +chip soc/intel/cannonlake + register "tcc_offset" = "5" # TCC of 95C + + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(94, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(65, 90), + TEMP_PCT(61, 80), + TEMP_PCT(57, 70), + TEMP_PCT(53, 60), + TEMP_PCT(49, 50), + TEMP_PCT(45, 40), + TEMP_PCT(41, 0),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 68, 5000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 78, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 15-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 15000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Middle"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[6]" = "1" + end # RTL8111H Ethernet NIC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/faffy/Makefile.inc b/src/mainboard/google/puff/variants/faffy/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/faffy/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/faffy/data.vbt b/src/mainboard/google/puff/variants/faffy/data.vbt Binary files differnew file mode 100644 index 0000000000..cda1c25d7d --- /dev/null +++ b/src/mainboard/google/puff/variants/faffy/data.vbt diff --git a/src/mainboard/google/puff/variants/faffy/gpio.c b/src/mainboard/google/puff/variants/faffy/gpio.c new file mode 100644 index 0000000000..996edc4fc7 --- /dev/null +++ b/src/mainboard/google/puff/variants/faffy/gpio.c @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + + /* E2 : EN_PP_MST_OD */ + PAD_CFG_GPO(GPP_E2, 1, DEEP), + /* E9 : USB_A0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/faffy/include/variant/ec.h b/src/mainboard/google/puff/variants/faffy/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/faffy/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/faffy/include/variant/gpio.h b/src/mainboard/google/puff/variants/faffy/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/faffy/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/faffy/overridetree.cb b/src/mainboard/google/puff/variants/faffy/overridetree.cb new file mode 100644 index 0000000000..1ac9414c6a --- /dev/null +++ b/src/mainboard/google/puff/variants/faffy/overridetree.cb @@ -0,0 +1,521 @@ +chip soc/intel/cannonlake + register "tcc_offset" = "5" # TCC of 95C + + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[6]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # PL2303 + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 73, 60000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN)" + + ## Power Limits Control + # 10-15W PL1 in 200mW increments, avg over 28-32s interval + # 15-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 10000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 15000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Middle"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[6]" = "1" + end # RTL8111H Ethernet NIC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/genesis/Makefile.inc b/src/mainboard/google/puff/variants/genesis/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/genesis/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/genesis/gpio.c b/src/mainboard/google/puff/variants/genesis/gpio.c new file mode 100644 index 0000000000..66a1b8aec1 --- /dev/null +++ b/src/mainboard/google/puff/variants/genesis/gpio.c @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A19 : PCH_PCON0_PDB_ODL */ + PAD_CFG_GPO(GPP_A19, 1, DEEP), + /* A20 : LAN_I350_WAKE# */ + PAD_CFG_GPI_IRQ_WAKE(GPP_A20, NONE, DEEP, LEVEL, INVERT), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + /* B6 : M2_SSD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), + /* B7 : M2_TPU0_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), + /* B8 : CLK_PCIE_REQ3 (not connected) */ + PAD_NC(GPP_B8, NONE), + /* B9 : M2_TPU1_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), + /* B10 : M2_WLAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C3 : PCH_MBCLK1_R (i350) */ + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), + /* C4 : PCH_MBDAT1_R (i350) */ + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON1_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + + /* E2 : Not connected */ + PAD_NC(GPP_E2, NONE), + /* E3 : TPU_RST_PIN40 */ + PAD_CFG_GPO(GPP_E3, 1, DEEP), + /* E7 : TPU_RST_PIN42 */ + PAD_CFG_GPO(GPP_E7, 1, DEEP), + /* E9 : PU 10K to PP3300_SOC_A */ + PAD_NC(GPP_E9, NONE), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + /* E15 : PCH_TYPEC_UPFB */ + PAD_CFG_GPI(GPP_E15, NONE, DEEP), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H6 : PCH_I2C_TPU_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : PCH_I2C_TPU_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/genesis/include/variant/ec.h b/src/mainboard/google/puff/variants/genesis/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/genesis/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/genesis/include/variant/gpio.h b/src/mainboard/google/puff/variants/genesis/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/genesis/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/genesis/overridetree.cb b/src/mainboard/google/puff/variants/genesis/overridetree.cb new file mode 100644 index 0000000000..b42ca911bc --- /dev/null +++ b/src/mainboard/google/puff/variants/genesis/overridetree.cb @@ -0,0 +1,531 @@ +chip soc/intel/cannonlake + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[6]" = "USB2_PORT_EMPTY" + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe root port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # PCIe root port 8 for WLAN + register "PcieRpEnable[7]" = "1" + register "PcieRpLtrEnable[7]" = "1" + # Uses CLK SRC 5 + register "PcieClkSrcUsage[5]" = "7" + register "PcieClkSrcClkReq[5]" = "5" + + # PCIe root port 9 for SSD (PCIe Lanes 11, 12) + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + # RP 9 uses CLK SRC 1 + register "PcieClkSrcUsage[1]" = "8" + register "PcieClkSrcClkReq[1]" = "1" + + # PCIe root port 10 disabled + register "PcieRpEnable[9]" = "0" + + # PCIe root port 11 TPU1 + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # RP 11 uses CLK SRC 1 + register "PcieClkSrcUsage[4]" = "10" + register "PcieClkSrcClkReq[4]" = "4" + + # PCIe root port 12 TPU0 + register "PcieRpEnable[11]" = "1" + register "PcieRpLtrEnable[11]" = "1" + # RP 11 uses CLK SRC 1 + register "PcieClkSrcUsage[2]" = "11" + register "PcieClkSrcClkReq[2]" = "2" + + # PCIe port 13 for i350 NIC (x4) + register "PcieRpEnable[12]" = "1" + register "PcieRpLtrEnable[12]" = "1" + # RP 13 uses CLK SRC 3 + register "PcieClkSrcUsage[3]" = "12" + # RP 13 does not use a source clock request line + # NOTE: Any value other than a valid source-clock-request (0-5) is + # effectively "not connected" + register "PcieClkSrcClkReq[3]" = "0xFF" + # Disable the remaining ports 14-16 + register "PcieRpEnable[13]" = "0" + register "PcieRpEnable[14]" = "0" + register "PcieRpEnable[15]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(94, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(72, 90), + TEMP_PCT(68, 80), + TEMP_PCT(62, 70), + TEMP_PCT(54, 60), + TEMP_PCT(46, 50), + TEMP_PCT(39, 40),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 51-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 125,}" + register "controls.power_limits.pl2" = "{ + .min_power = 51000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + # USB3 Port 5 is not populated + device usb 3.4 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 M.2 HDMI-to-USB"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 0)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 off end # eMMC + device pci 1c.6 on # PCI Root Port 7 (LAN) + chip drivers/net # RTL8111H Ethernet NIC + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + end + device pci 1c.7 on # PCI Root Port 8 (WLAN) + register "PcieRpSlotImplemented[7]" = "1" # M.2 Slot + end + device pci 1d.0 on # PCI Root Port 9 (TPU) + register "PcieRpSlotImplemented[8]" = "1" # M.2 Slot + end + device pci 1d.1 off end # PCI Root Port 10 (Not connected) + device pci 1d.2 on end # PCI Root Port 11 (TPU1) + register "PcieRpSlotImplemented[10]" = "1" # M.2 Slot + device pci 1d.3 on end # PCI Root Port 12 (TPU0) + register "PcieRpSlotImplemented[11]" = "1" # M.2 Slot + device pci 1d.4 on # PCI Root Port 13 (X4 i350 NIC) + register "PcieRpSlotImplemented[12]" = "0" # Built-in + end + device pci 1d.5 on end # PCI Root Port 14 (non-root) + device pci 1d.6 on end # PCI Root Port 15 (non-root) + device pci 1d.7 on end # PCI Root Port 16 (non-root) + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/kaisa/Makefile.inc b/src/mainboard/google/puff/variants/kaisa/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/kaisa/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/kaisa/data.vbt b/src/mainboard/google/puff/variants/kaisa/data.vbt Binary files differnew file mode 100644 index 0000000000..cda1c25d7d --- /dev/null +++ b/src/mainboard/google/puff/variants/kaisa/data.vbt diff --git a/src/mainboard/google/puff/variants/kaisa/gpio.c b/src/mainboard/google/puff/variants/kaisa/gpio.c new file mode 100644 index 0000000000..996edc4fc7 --- /dev/null +++ b/src/mainboard/google/puff/variants/kaisa/gpio.c @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + + /* E2 : EN_PP_MST_OD */ + PAD_CFG_GPO(GPP_E2, 1, DEEP), + /* E9 : USB_A0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/kaisa/include/variant/ec.h b/src/mainboard/google/puff/variants/kaisa/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/kaisa/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/kaisa/include/variant/gpio.h b/src/mainboard/google/puff/variants/kaisa/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/kaisa/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/kaisa/overridetree.cb b/src/mainboard/google/puff/variants/kaisa/overridetree.cb new file mode 100644 index 0000000000..50c6d0b1b1 --- /dev/null +++ b/src/mainboard/google/puff/variants/kaisa/overridetree.cb @@ -0,0 +1,547 @@ +chip soc/intel/cannonlake + register "tcc_offset" = "5" # TCC of 95C + + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as kaisa variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(94, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(65, 90), + TEMP_PCT(61, 80), + TEMP_PCT(57, 70), + TEMP_PCT(53, 60), + TEMP_PCT(49, 50), + TEMP_PCT(45, 40), + TEMP_PCT(41, 0),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 68, 5000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 78, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 15-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 15000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Middle"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[6]" = "1" + end # RTL8111H Ethernet NIC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/moonbuggy/Makefile.inc b/src/mainboard/google/puff/variants/moonbuggy/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/moonbuggy/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/moonbuggy/gpio.c b/src/mainboard/google/puff/variants/moonbuggy/gpio.c new file mode 100644 index 0000000000..d8f392028d --- /dev/null +++ b/src/mainboard/google/puff/variants/moonbuggy/gpio.c @@ -0,0 +1,157 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A19 : PCH_PCON0_PDB_ODL */ + PAD_CFG_GPO(GPP_A19, 1, DEEP), + /* A20 : LAN_I350_WAKE# */ + PAD_CFG_GPI_IRQ_WAKE(GPP_A20, NONE, DEEP, LEVEL, INVERT), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + /* B6 : M2_SSD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), + /* B7 : M2_TPU0_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), + /* B8 : CLK_PCIE_REQ3 (not connected) */ + PAD_NC(GPP_B8, NONE), + /* B9 : M2_TPU1_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), + /* B10 : M2_WLAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C3 : PCH_MBCLK1_R (i350) */ + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), + /* C4 : PCH_MBDAT1_R (i350) */ + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + /* C6 : M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON1_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C12 : PCH_UART1_RX_ADB_TX */ + PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), + /* C13 : PCH_UART1_TX_ADB_RX */ + PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + /* C16 : PCH_I2C_RFU_SDA (NC) */ + PAD_NC(GPP_C16, NONE), + /* C17 : PCH_I2C_RFU_SCL (NC) */ + PAD_NC(GPP_C17, NONE), + /* C18 : EC_I2C_HDMI_RE_SCL */ + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + /* C19 : EC_12C_HDMI_RE_SDA */ + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + + /* D1 : REC_MODE */ + PAD_CFG_GPO(GPP_D1, 1, DEEP), + /* D2 : DEV_MODE_CTRL */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* D3 : BOOT_IND */ + PAD_CFG_GPI(GPP_D3, NONE, DEEP), + /* D14 : EC_PCH_INT_L */ + PAD_CFG_GPI_APIC(GPP_D14, NONE, PLTRST, LEVEL, INVERT), + /* D21 : BOOT_SEL_N */ + PAD_CFG_GPO(GPP_D21, 1, DEEP), + /* D22 : QSPI_MR_N */ + PAD_CFG_GPO(GPP_D22, 1, DEEP), + /* D23 : Not connected */ + PAD_NC(GPP_D23, NONE), + + /* E2 : Not connected */ + PAD_NC(GPP_E2, NONE), + /* E3 : TPU_BOOT_DELAY_PIN40 */ + PAD_CFG_GPO(GPP_E3, 1, DEEP), + /* E7 : TPU_BOOT_DELAY_PIN42 */ + PAD_CFG_GPO(GPP_E7, 1, DEEP), + /* E9 : PU 10K to PP3300_SOC_A */ + PAD_NC(GPP_E9, NONE), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + /* E11 : PU 10K to PP3300_SOC_A */ + PAD_NC(GPP_E11, NONE), + /* E12 : PU 10K to PP3300_SOC_A */ + PAD_NC(GPP_E12, NONE), + /* E15 : PCH_TYPEC_UPFB */ + PAD_CFG_GPI(GPP_E15, NONE, DEEP), + + /* H0 : Not connected */ + PAD_NC(GPP_H0, NONE), + /* H4 : PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5 : PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H6 : PCH_I2C_TPU_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : PCH_I2C_TPU_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H8 : Not connected */ + PAD_NC(GPP_H8, NONE), + /* H9 : Not connected */ + PAD_NC(GPP_H9, NONE), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* C20 : PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/moonbuggy/include/variant/ec.h b/src/mainboard/google/puff/variants/moonbuggy/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/moonbuggy/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/moonbuggy/include/variant/gpio.h b/src/mainboard/google/puff/variants/moonbuggy/include/variant/gpio.h new file mode 100644 index 0000000000..9dd243400d --- /dev/null +++ b/src/mainboard/google/puff/variants/moonbuggy/include/variant/gpio.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#undef EC_SYNC_IRQ +#define EC_SYNC_IRQ GPP_D14_IRQ + +#endif diff --git a/src/mainboard/google/puff/variants/moonbuggy/overridetree.cb b/src/mainboard/google/puff/variants/moonbuggy/overridetree.cb new file mode 100644 index 0000000000..1049805700 --- /dev/null +++ b/src/mainboard/google/puff/variants/moonbuggy/overridetree.cb @@ -0,0 +1,535 @@ +chip soc/intel/cannonlake + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoPci, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[6]" = "USB2_PORT_EMPTY" + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe root port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # PCIe root port 8 for WLAN + register "PcieRpEnable[7]" = "1" + register "PcieRpLtrEnable[7]" = "1" + # Uses CLK SRC 5 + register "PcieClkSrcUsage[5]" = "7" + register "PcieClkSrcClkReq[5]" = "5" + + # PCIe root port 9 for SSD (PCIe Lanes 11, 12) + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + # RP 9 uses CLK SRC 1 + register "PcieClkSrcUsage[1]" = "8" + register "PcieClkSrcClkReq[1]" = "1" + + # PCIe root port 10 disabled + register "PcieRpEnable[9]" = "0" + + # PCIe root port 11 TPU1 + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # RP 11 uses CLK SRC 1 + register "PcieClkSrcUsage[4]" = "10" + register "PcieClkSrcClkReq[4]" = "4" + + # PCIe root port 12 TPU0 + register "PcieRpEnable[11]" = "1" + register "PcieRpLtrEnable[11]" = "1" + # RP 11 uses CLK SRC 1 + register "PcieClkSrcUsage[2]" = "11" + register "PcieClkSrcClkReq[2]" = "2" + + # PCIe port 13 for i350 NIC (x4) + register "PcieRpEnable[12]" = "1" + register "PcieRpLtrEnable[12]" = "1" + # RP 13 uses CLK SRC 3 + register "PcieClkSrcUsage[3]" = "12" + # RP 13 does not use a source clock request line + # NOTE: Any value other than a valid source-clock-request (0-5) is + # effectively "not connected" + register "PcieClkSrcClkReq[3]" = "0xFF" + # Disable the remaining ports 14-16 + register "PcieRpEnable[13]" = "0" + register "PcieRpEnable[14]" = "0" + register "PcieRpEnable[15]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(94, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(72, 90), + TEMP_PCT(68, 80), + TEMP_PCT(62, 70), + TEMP_PCT(54, 60), + TEMP_PCT(46, 50), + TEMP_PCT(39, 40),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 85, 6000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 51-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 125,}" + register "controls.power_limits.pl2" = "{ + .min_power = 51000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Middle"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 off end # eMMC + device pci 1c.6 on # PCI Root Port 7 (LAN) + chip drivers/net # RTL8111H Ethernet NIC + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + end + device pci 1c.7 on # PCI Root Port 8 (WLAN) + register "PcieRpSlotImplemented[7]" = "1" # M.2 Slot + end + device pci 1d.0 on # PCI Root Port 9 (TPU) + register "PcieRpSlotImplemented[8]" = "1" # M.2 Slot + end + device pci 1d.1 off end # PCI Root Port 10 (Not connected) + device pci 1d.2 on end # PCI Root Port 11 (TPU1) + register "PcieRpSlotImplemented[10]" = "1" # M.2 Slot + device pci 1d.3 on end # PCI Root Port 12 (TPU0) + register "PcieRpSlotImplemented[11]" = "1" # M.2 Slot + device pci 1d.4 on # PCI Root Port 13 (X4 i350 NIC) + register "PcieRpSlotImplemented[12]" = "0" # Built-in + end + device pci 1d.5 on end # PCI Root Port 14 (non-root) + device pci 1d.6 on end # PCI Root Port 15 (non-root) + device pci 1d.7 on end # PCI Root Port 16 (non-root) + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/noibat/Makefile.inc b/src/mainboard/google/puff/variants/noibat/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/noibat/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/noibat/data.vbt b/src/mainboard/google/puff/variants/noibat/data.vbt Binary files differnew file mode 100644 index 0000000000..cda1c25d7d --- /dev/null +++ b/src/mainboard/google/puff/variants/noibat/data.vbt diff --git a/src/mainboard/google/puff/variants/noibat/gpio.c b/src/mainboard/google/puff/variants/noibat/gpio.c new file mode 100644 index 0000000000..996edc4fc7 --- /dev/null +++ b/src/mainboard/google/puff/variants/noibat/gpio.c @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + + /* E2 : EN_PP_MST_OD */ + PAD_CFG_GPO(GPP_E2, 1, DEEP), + /* E9 : USB_A0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/noibat/include/variant/ec.h b/src/mainboard/google/puff/variants/noibat/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/noibat/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/noibat/include/variant/gpio.h b/src/mainboard/google/puff/variants/noibat/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/noibat/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/noibat/overridetree.cb b/src/mainboard/google/puff/variants/noibat/overridetree.cb new file mode 100644 index 0000000000..cf6046224c --- /dev/null +++ b/src/mainboard/google/puff/variants/noibat/overridetree.cb @@ -0,0 +1,458 @@ +chip soc/intel/cannonlake + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as noibat variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(94, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(65, 90), + TEMP_PCT(52, 80), + TEMP_PCT(50, 70), + TEMP_PCT(48, 60), + TEMP_PCT(46, 50), + TEMP_PCT(44, 40), + TEMP_PCT(42, 0),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 68, 5000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 78, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 15-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 15000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[6]" = "1" + end # RTL8111H Ethernet NIC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/puff/Makefile.inc b/src/mainboard/google/puff/variants/puff/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/puff/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/puff/data.vbt b/src/mainboard/google/puff/variants/puff/data.vbt Binary files differnew file mode 100644 index 0000000000..cda1c25d7d --- /dev/null +++ b/src/mainboard/google/puff/variants/puff/data.vbt diff --git a/src/mainboard/google/puff/variants/puff/gpio.c b/src/mainboard/google/puff/variants/puff/gpio.c new file mode 100644 index 0000000000..996edc4fc7 --- /dev/null +++ b/src/mainboard/google/puff/variants/puff/gpio.c @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + + /* E2 : EN_PP_MST_OD */ + PAD_CFG_GPO(GPP_E2, 1, DEEP), + /* E9 : USB_A0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/puff/include/variant/ec.h b/src/mainboard/google/puff/variants/puff/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/puff/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/puff/include/variant/gpio.h b/src/mainboard/google/puff/variants/puff/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/puff/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/puff/overridetree.cb b/src/mainboard/google/puff/variants/puff/overridetree.cb new file mode 100644 index 0000000000..0d9bf7237e --- /dev/null +++ b/src/mainboard/google/puff/variants/puff/overridetree.cb @@ -0,0 +1,482 @@ +chip soc/intel/cannonlake + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + # NOTE: This only applies to Puff, + # usb2_ports[1] and usb2_ports[3] were swapped on + # reference schematics after Puff has been built. + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(4) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(90, 85), + TEMP_PCT(85, 75), + TEMP_PCT(80, 65), + TEMP_PCT(75, 55), + TEMP_PCT(70, 45),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(50, 85), + TEMP_PCT(47, 75), + TEMP_PCT(45, 65), + TEMP_PCT(42, 55), + TEMP_PCT(39, 45),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 93, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 65, 6000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 25-64W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 25000, + .max_power = 64000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Middle"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[6]" = "1" + end # RTL8111H Ethernet NIC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/scout/Makefile.inc b/src/mainboard/google/puff/variants/scout/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/scout/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/scout/gpio.c b/src/mainboard/google/puff/variants/scout/gpio.c new file mode 100644 index 0000000000..55154364ac --- /dev/null +++ b/src/mainboard/google/puff/variants/scout/gpio.c @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A19 : Not connected */ + PAD_NC(GPP_A19, NONE), + /* A20 : Not connected */ + PAD_NC(GPP_A20, NONE), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + /* B6 : M2_SSD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), + /* B7 : M2_TPU0_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), + /* B8 : CLK_PCIE_REQ3 (not connected) */ + PAD_NC(GPP_B8, NONE), + /* B9 : M2_TPU1_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), + /* B10 : M2_WLAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C3 : PCH_MBCLK1_R (i350) */ + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), + /* C4 : PCH_MBDAT1_R (i350) */ + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON1_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C12 : PCH_RX_TSUM_UART_TX */ + PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), + /* C13 : PCH_RX_TSUM_UART_RX */ + PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + /* C16 : PCH_I2C_RFU_SDA (NC) */ + PAD_NC(GPP_C16, NONE), + /* C17 : PCH_I2C_RFU_SCL (NC) */ + PAD_NC(GPP_C17, NONE), + /* C18 : PCH_I2C_USI_SDA */ + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + /* C19 : PCH_I2C_USI_SDL */ + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + + /* D13 : SMBUS_ISP_SCALAR */ + PAD_CFG_GPO(GPP_D13, 0, DEEP), + /* D14 : EC_PCH_INT_L */ + PAD_CFG_GPI_APIC(GPP_D14, NONE, PLTRST, LEVEL, INVERT), + /* D15 : USI_RST_L */ + PAD_CFG_GPO(GPP_D15, 1, DEEP), + /* D16 TOUCH_INT */ + PAD_CFG_GPI_IRQ_WAKE(GPP_D16, NONE, PLTRST, LEVEL, INVERT), + + /* E2 : Not connected */ + PAD_NC(GPP_E2, NONE), + /* E3 : TPU_RST_PIN40 */ + PAD_CFG_GPO(GPP_E3, 1, DEEP), + /* E7 : TPU_RST_PIN42 */ + PAD_CFG_GPO(GPP_E7, 1, DEEP), + /* E9 : PU 10K to PP3300_SOC_A */ + PAD_NC(GPP_E9, NONE), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + /* E15 : PCH_TYPEC_UPFB */ + PAD_CFG_GPI(GPP_E15, NONE, DEEP), + + /* E18 : DDI1_CLK */ + PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1), + /* E19 : DDI1_DATA */ + PAD_CFG_NF(GPP_E19, NONE, DEEP, NF1), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_SCALER_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_SCALER_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H6 : PCH_I2C_TPU_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : PCH_I2C_TPU_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H8 : NC */ + PAD_NC(GPP_H8, NONE), + /* H9 : NC */ + PAD_NC(GPP_H9, NONE), + /* H10 : NC */ + PAD_NC(GPP_H10, NONE), + /* H11 : NC */ + PAD_NC(GPP_H11, NONE), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/scout/include/variant/ec.h b/src/mainboard/google/puff/variants/scout/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/scout/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/scout/include/variant/gpio.h b/src/mainboard/google/puff/variants/scout/include/variant/gpio.h new file mode 100644 index 0000000000..9dd243400d --- /dev/null +++ b/src/mainboard/google/puff/variants/scout/include/variant/gpio.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#undef EC_SYNC_IRQ +#define EC_SYNC_IRQ GPP_D14_IRQ + +#endif diff --git a/src/mainboard/google/puff/variants/scout/overridetree.cb b/src/mainboard/google/puff/variants/scout/overridetree.cb new file mode 100644 index 0000000000..8e6bc7714b --- /dev/null +++ b/src/mainboard/google/puff/variants/scout/overridetree.cb @@ -0,0 +1,514 @@ +chip soc/intel/cannonlake + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoPci, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[6]" = "USB2_PORT_EMPTY" + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5) | \ + USB_PORT_WAKE_ENABLE(6)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C1 | USI (Touch screen) | + #| I2C2 | SCALER | + #| I2C3 | TPU | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe root port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # PCIe root port 8 for WLAN + register "PcieRpEnable[7]" = "1" + register "PcieRpLtrEnable[7]" = "1" + # Uses CLK SRC 3 + register "PcieClkSrcUsage[3]" = "7" + register "PcieClkSrcClkReq[3]" = "3" + + # PCIe root port 9 for SSD (PCIe Lanes 9-12) + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + # RP 9 uses CLK SRC 1 + register "PcieClkSrcUsage[1]" = "8" + register "PcieClkSrcClkReq[1]" = "1" + + # PCIe root port 10-12 disabled + register "PcieRpEnable[9]" = "0" + register "PcieRpEnable[10]" = "0" + register "PcieRpEnable[11]" = "0" + + # PCIe root port 13 TPU0 + register "PcieRpEnable[12]" = "1" + register "PcieRpLtrEnable[12]" = "1" + # RP 13 uses CLK SRC 2 + register "PcieClkSrcUsage[2]" = "12" + register "PcieClkSrcClkReq[2]" = "2" + + # PCIe root port 14 TPU1 + register "PcieRpEnable[13]" = "1" + register "PcieRpLtrEnable[13]" = "1" + # RP 14 uses CLK SRC 4 + register "PcieClkSrcUsage[4]" = "13" + register "PcieClkSrcClkReq[4]" = "4" + + register "PcieRpEnable[14]" = "0" + register "PcieRpEnable[15]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(94, 0),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(82, 80), + TEMP_PCT(80, 70), + TEMP_PCT(78, 60), + TEMP_PCT(75, 50), + TEMP_PCT(73, 40), + TEMP_PCT(35, 30),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 85, 5000)" + register "policies.passive[2]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 85, 5000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN)" + register "policies.critical[2]" = "DPTF_CRITICAL(TEMP_SENSOR_1, 90, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 51-51W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 125,}" + register "controls.power_limits.pl2" = "{ + .min_power = 51000, + .max_power = 51000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + # USB3 Port 5 is not populated + device usb 3.4 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 M.2 HDMI-to-USB"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 0)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 on # I2C #1, USI (Touch screen) + chip drivers/i2c/hid + register "generic.hid" = ""ILTK0001"" + register "generic.desc" = ""ILITEK Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" + register "generic.reset_delay_ms" = "600" + register "generic.wake" = "GPE0_DW2_16" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 41 on end + end + end + device pci 15.2 on end # I2C #2, SCALER + device pci 15.3 on end # I2C #3, TPU + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 off end # I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on # PCI Root Port 7 (LAN) + chip drivers/net # RTL8111H Ethernet NIC + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + end + device pci 1c.7 on # PCI Root Port 8 (WLAN) + register "PcieRpSlotImplemented[7]" = "1" # M.2 Slot + end + device pci 1d.0 on # PCI Root Port 9 (SSD) + register "PcieRpSlotImplemented[8]" = "1" # M.2 Slot + end + device pci 1d.1 off end # PCI Root Port 10 (Not connected) + device pci 1d.2 off end # PCI Root Port 11 (Not connected) + device pci 1d.3 off end # PCI Root Port 12 (Not connected) + device pci 1d.4 on # PCI Root Port 13 (TPU0) + register "PcieRpSlotImplemented[12]" = "1" # M.2 Slot + end + device pci 1d.5 on # PCI Root Port 14 (TPU1) + register "PcieRpSlotImplemented[13]" = "1" # M.2 Slot + end + device pci 1d.6 on end # PCI Root Port 15 (non-root) + device pci 1d.7 on end # PCI Root Port 16 (non-root) + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end diff --git a/src/mainboard/google/puff/variants/wyvern/Makefile.inc b/src/mainboard/google/puff/variants/wyvern/Makefile.inc new file mode 100644 index 0000000000..3b5b7d000d --- /dev/null +++ b/src/mainboard/google/puff/variants/wyvern/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +bootblock-y += gpio.c diff --git a/src/mainboard/google/puff/variants/wyvern/data.vbt b/src/mainboard/google/puff/variants/wyvern/data.vbt Binary files differnew file mode 100644 index 0000000000..cda1c25d7d --- /dev/null +++ b/src/mainboard/google/puff/variants/wyvern/data.vbt diff --git a/src/mainboard/google/puff/variants/wyvern/gpio.c b/src/mainboard/google/puff/variants/wyvern/gpio.c new file mode 100644 index 0000000000..996edc4fc7 --- /dev/null +++ b/src/mainboard/google/puff/variants/wyvern/gpio.c @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +static const struct pad_config gpio_table[] = { + /* A16 : SD_OC_ODL */ + PAD_CFG_GPI(GPP_A16, NONE, DEEP), + /* A18 : LAN_PE_ISOLATE_ODL */ + PAD_CFG_GPO(GPP_A18, 1, DEEP), + /* A23 : M2_WLAN_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT), + + /* B5 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + + /* C0 : SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C6: M2_WLAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE), + /* C7 : LAN_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE), + /* C10 : PCH_PCON_RST_ODL */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C11 : PCH_PCON_PDB_ODL */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C15 : WLAN_OFF_L */ + PAD_CFG_GPO(GPP_C15, 1, DEEP), + + /* E2 : EN_PP_MST_OD */ + PAD_CFG_GPO(GPP_E2, 1, DEEP), + /* E9 : USB_A0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB_A1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + + /* F11 : EMMC_CMD */ + PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_CLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_RST_L */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + + /* H4: PCH_I2C_PCON_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5: PCH_I2C_PCON_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H22 : PWM_PP3300_BIOZZER */ + PAD_CFG_GPO(GPP_H22, 0, DEEP), +}; + +const struct pad_config *override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B14 : GPP_B14_STRAP */ + PAD_NC(GPP_B14, NONE), + /* B22 : GPP_B22_STRAP */ + PAD_NC(GPP_B22, NONE), + /* E19 : GPP_E19_STRAP */ + PAD_NC(GPP_E19, NONE), + /* E21 : GPP_E21_STRAP */ + PAD_NC(GPP_E21, NONE), + /* B15 : H1_SLAVE_SPI_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : H1_SLAVE_SPI_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : H1_SLAVE_SPI_MISO_R */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : H1_SLAVE_SPI_MOSI_R */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* C14 : BT_DISABLE_L */ + PAD_CFG_GPO(GPP_C14, 0, DEEP), + /* PCH_WP_OD */ + PAD_CFG_GPI(GPP_C20, NONE, DEEP), + /* C21 : H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C22, NONE, DEEP), + /* C23 : WLAN_PE_RST# */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + /* E1 : M2_SSD_PEDET */ + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), + /* E5 : SATA_DEVSLP1 */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/puff/variants/wyvern/include/variant/ec.h b/src/mainboard/google/puff/variants/wyvern/include/variant/ec.h new file mode 100644 index 0000000000..59fb3783c5 --- /dev/null +++ b/src/mainboard/google/puff/variants/wyvern/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_EC_H +#define VARIANT_EC_H + +#include <puff/ec.h> + +#endif diff --git a/src/mainboard/google/puff/variants/wyvern/include/variant/gpio.h b/src/mainboard/google/puff/variants/wyvern/include/variant/gpio.h new file mode 100644 index 0000000000..79a141008f --- /dev/null +++ b/src/mainboard/google/puff/variants/wyvern/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/puff/variants/wyvern/overridetree.cb b/src/mainboard/google/puff/variants/wyvern/overridetree.cb new file mode 100644 index 0000000000..b9dd489cf2 --- /dev/null +++ b/src/mainboard/google/puff/variants/wyvern/overridetree.cb @@ -0,0 +1,483 @@ +chip soc/intel/cannonlake + + # Auto-switch between X4 NVMe and X2 NVMe. + register "TetonGlacierMode" = "1" + + register "SataPortsEnable[0]" = "1" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # No need for dynamic config (and the additional RAM training time) + # on a Chromebox; always use high power/high performance mode + register "SaGv" = "SaGv_FixedHigh" + + # USB configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 2 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port 4 + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A port 0 + register "usb2_ports[9]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + + # Bitmap for Wake Enable on USB attach/detach + register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(6)" + register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ + USB_PORT_WAKE_ENABLE(2) | \ + USB_PORT_WAKE_ENABLE(3) | \ + USB_PORT_WAKE_ENABLE(5)" + + # Enable eMMC HS400 + register "ScsEmmcHs400Enabled" = "1" + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-14.3.7. + # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-14.3.8. + # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. + # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-14.3.9. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. + # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-14.3.10. + # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. + # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. + # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. + # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-14.3.12. + # [17:16] stands for Rx Clock before Output Buffer, + # 00: Rx clock after output buffer, + # 01: Rx clock before output buffer, + # 10: Automatic selection based on working mode. + # 11: Reserved + # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. + # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. + register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-14.3.11. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. + register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" + + # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them. + register "PchHdaAudioLinkSsp1" = "0" + register "PchHdaAudioLinkDmic0" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | RFU | + #| I2C2 | PS175 | + #| I2C3 | MST | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 0, + .fall_time_ns = 0, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 60, + }, + }" + + # PCIe port 7 for LAN + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # Uses CLK SRC 0 + register "PcieClkSrcUsage[0]" = "6" + register "PcieClkSrcClkReq[0]" = "0" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "vSD3_CD_B" + + # SATA port 1 Gen3 Strength + # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB + register "sata_port[1].TxGen3DeEmphEnable" = "1" + register "sata_port[1].TxGen3DeEmph" = "0x20" + + device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + ## Active Policy + register "policies.active[0]" = "{.target=DPTF_CPU, + .thresholds={TEMP_PCT(90, 85), + TEMP_PCT(85, 75), + TEMP_PCT(80, 65), + TEMP_PCT(75, 55), + TEMP_PCT(70, 45),}}" + register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, + .thresholds={TEMP_PCT(50, 85), + TEMP_PCT(47, 75), + TEMP_PCT(45, 65), + TEMP_PCT(42, 55), + TEMP_PCT(39, 45),}}" + + ## Passive Policy + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 93, 5000)" + register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 65, 6000)" + + ## Critical Policy + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" + register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN)" + + ## Power Limits Control + # PL1 is fixed at 15W, avg over 28-32s interval + # 25-64W PL2 in 1000mW increments, avg over 28-32s interval + register "controls.power_limits.pl1" = "{ + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 25000, + .max_power = 64000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf[0]" = "{ 255, 1700 }" + register "controls.charger_perf[1]" = "{ 24, 1500 }" + register "controls.charger_perf[2]" = "{ 16, 1000 }" + register "controls.charger_perf[3]" = "{ 8, 500 }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" + register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" + register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" + register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" + register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" + register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" + register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" + register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" + register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" + register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" + + # Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF 0x1903 + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Right"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Middle"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Rear Left"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 2.5 on end + end + chip drivers/usb/acpi + device usb 2.6 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 0)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(0, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Right"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Rear"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Left"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 0)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Rear Middle"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off + # RFU - Reserved for Future Use. + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""1AF80175"" + register "name" = ""PS17"" + register "desc" = ""Parade PS175"" + device i2c 4a on end + end + end # I2C #2, PCON PS175. + device pci 15.3 on + chip drivers/i2c/generic + register "hid" = ""10EC2142"" + register "name" = ""RTD2"" + register "desc" = ""Realtek RTD2142"" + device i2c 4a on end + end + end # I2C #3, Realtek RTD2142. + device pci 16.0 on end # Management Engine Interface 1 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C #4 + device pci 1a.0 on end # eMMC + device pci 1c.6 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW1_07" # GPP_C7 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + register "PcieRpSlotImplemented[6]" = "1" + end # RTL8111H Ethernet NIC + device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) + register "PcieRpSlotImplemented[10]" = "1" + end + device pci 1e.3 off end # GSPI #1 + end + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 1004, + .dc_loadline = 1004, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 181, + .dc_loadline = 181, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = 0, + .voltage_limit = 1520, + .ac_loadline = 319, + .dc_loadline = 319, + }" + +end |