diff options
Diffstat (limited to 'src/mainboard/google/poppy/variants')
7 files changed, 1040 insertions, 0 deletions
diff --git a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb new file mode 100644 index 0000000000..d232028544 --- /dev/null +++ b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb @@ -0,0 +1,420 @@ +chip soc/intel/skylake + + # Deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "1" + register "deep_s5_enable_ac" = "1" + register "deep_s5_enable_dc" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "EnableTraceHub" = "0" + register "XdciEnable" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "1" + register "SaImguEnable" = "1" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "2" + register "IshEnable" = "0" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "FspSkipMpInit" = "1" + register "SaGv" = "3" + register "SerialIrqConfigSirqEnable" = "1" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "1" + register "SendVrMbxCmd" = "1" # IMVP8 workaround + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(7), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(34), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + # Enable Root port 1. + register "PcieRpEnable[0]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[0]" = "1" + # RP 1 uses SRCCLKREQ1# + register "PcieRpClkReqNumber[0]" = "1" + + register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" # Touchscreen + register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" # NFC + register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" # Camera + register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" # Pen + register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # Camera + register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" # Audio + + # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM + # communication before memory is up. + register "gspi[0]" = "{ + .speed_mhz = 1, + .early_init = 1, + }" + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSpi0] = PchSerialIoPci, + [PchSerialIoIndexSpi1] = PchSerialIoPci, + [PchSerialIoIndexUart0] = PchSerialIoPci, + [PchSerialIoIndexUart1] = PchSerialIoDisabled, + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, + }" + + register "speed_shift_enable" = "1" + register "tdp_pl2_override" = "7" + register "tcc_offset" = "10" # TCC of 90C + + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_E15" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ATML0001"" + register "desc" = ""Atmel Touchscreen"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" + register "probed" = "1" + device i2c 4b on end + end + end # I2C #0 + device pci 15.1 on end # I2C #1 + device pci 15.2 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3472"" + register "acpi_name" = ""PMIC"" + register "chip_name" = ""TPS68470 PMIC"" + register "device_type" = "INTEL_ACPI_CAMERA_PMIC" + device i2c 4d on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTID850"" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""OV 13850 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + # Camera SSDB buffer + register "ssdb.sensor_card_sku" = "0x50" + register "ssdb.link_used" = "0x00" + register "ssdb.lanes_used" = "0x04" + register "ssdb.rom_type" = "0x08" + register "ssdb.vcm_type" = "0x03" + register "ssdb.platform" = "0x09" + register "ssdb.flash_support" = "0x02" + register "ssdb.privacy_led" = "0x01" + register "ssdb.degree" = "0x00" + register "ssdb.mipi_define" = "0x01" + register "ssdb.mclk" = "0x016E3600" + + # Sensor PWDB entries + register "num_pwdb_entries" = "5" + + register "pwdb[0].name" = ""VSIO"" + register "pwdb[0].value" = "1800600" + register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[0].delay_usec" = "0" + + register "pwdb[1].name" = ""tps68470-a"" + register "pwdb[1].value" = "19200000" + register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_CLK" + register "pwdb[1].delay_usec" = "0" + + register "pwdb[2].name" = ""ANA"" + register "pwdb[2].value" = "2815200" + register "pwdb[2].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[2].delay_usec" = "3000" + + register "pwdb[3].name" = ""s_resetn"" + register "pwdb[3].value" = "1" + register "pwdb[3].entry_type" = "INTEL_ACPI_CAMERA_GPIO" + register "pwdb[3].delay_usec" = "0" + + register "pwdb[4].name" = ""CORE"" + register "pwdb[4].value" = "1200000" + register "pwdb[4].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[4].delay_usec" = "3000" + + device i2c 10 on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""DW9714"" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""Dongwoon AF DAC"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + # VCM PWDB entries + register "num_pwdb_entries" = "2" + register "pwdb[0].name" = ""VSIO"" + register "pwdb[0].value" = "1800600" + register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[0].delay_usec" = "0" + + register "pwdb[1].name" = ""VCM"" + register "pwdb[1].value" = "2815200" + register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[1].delay_usec" = "3000" + + device i2c 0xc on end + end + end # I2C #2 + device pci 15.3 on + chip drivers/i2c/hid + register "generic.hid" = ""WCOM50C1"" + register "generic.desc" = ""WCOM Digitizer"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x9 on end + end + end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 on + chip drivers/i2c/max98927 + register "interleave_mode" = "1" + register "uid" = "0" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 39 on end + end + chip drivers/i2c/max98927 + register "interleave_mode" = "1" + register "uid" = "1" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 3A on end + end + chip drivers/i2c/generic + register "hid" = ""10EC5663"" + register "name" = ""RT53"" + register "desc" = ""Realtek RT5663"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D9)" + register "probed" = "1" + device i2c 13 on end + end + end # I2C #5 + device pci 19.2 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3479"" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""OV 5670 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + # Camera SSDB buffer + register "ssdb.sensor_card_sku" = "0x50" + register "ssdb.link_used" = "0x01" + register "ssdb.lanes_used" = "0x02" + register "ssdb.rom_type" = "0x08" + register "ssdb.vcm_type" = "0x03" + register "ssdb.platform" = "0x09" + register "ssdb.flash_support" = "0x02" + register "ssdb.privacy_led" = "0x01" + register "ssdb.mipi_define" = "0x01" + register "ssdb.mclk" = "0x016E3600" + + # Sensor PWDB entries + register "num_pwdb_entries" = "6" + + register "pwdb[0].name" = ""VSIO"" + register "pwdb[0].value" = "1800600" + register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[0].delay_usec" = "0" + + register "pwdb[1].name" = ""AUX2"" + register "pwdb[1].value" = "1800600" + register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[1].delay_usec" = "0" + + register "pwdb[2].name" = ""tps68470-b"" + register "pwdb[2].value" = "19200000" + register "pwdb[2].entry_type" = "INTEL_ACPI_CAMERA_CLK" + register "pwdb[2].delay_usec" = "0" + + register "pwdb[3].name" = ""gpio.4"" + register "pwdb[3].value" = "1" + register "pwdb[3].entry_type" = "INTEL_ACPI_CAMERA_GPIO" + register "pwdb[3].delay_usec" = "3000" + + register "pwdb[4].name" = ""gpio.5"" + register "pwdb[4].value" = "1" + register "pwdb[4].entry_type" = "INTEL_ACPI_CAMERA_GPIO" + register "pwdb[4].delay_usec" = "0" + + register "pwdb[5].name" = ""AUX1"" + register "pwdb[5].value" = "1213200" + register "pwdb[5].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[5].delay_usec" = "3000" + + device i2c 10 on end + end + end # I2C #4 + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_PCI_EXP" + device pci 00.0 on end + end + end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 on end # GSPI #0 + device pci 1e.3 on end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/google/poppy/variants/baseboard/include/baseboard/acpi/dptf.asl b/src/mainboard/google/poppy/variants/baseboard/include/baseboard/acpi/dptf.asl new file mode 100644 index 0000000000..7f6cd8e722 --- /dev/null +++ b/src/mainboard/google/poppy/variants/baseboard/include/baseboard/acpi/dptf.asl @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Google Inc. + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 94 +#define DPTF_CPU_CRITICAL 99 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "Ambient" +#define DPTF_TSR0_PASSIVE 55 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "Charger" +#define DPTF_TSR1_PASSIVE 55 +#define DPTF_TSR1_CRITICAL 75 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "DRAM" +#define DPTF_TSR2_PASSIVE 52 +#define DPTF_TSR2_CRITICAL 75 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ +}) + +Name (DTRT, Package () { + /* CPU Throttle Effect on CPU */ + Package () { \_SB.PCI0.B0D4, \_SB.PCI0.B0D4, 100, 50, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 0 */ + Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR0, 100, 600, 0, 0, 0, 0 }, + +#ifdef DPTF_ENABLE_CHARGER + /* Charger Effect on Temp Sensor 1 */ + Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 200, 600, 0, 0, 0, 0 }, +#endif + + /* CPU Effect on Temp Sensor 2 */ + Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR2, 100, 90, 0, 0, 0, 0 }, +}) + +Name (MPPC, Package () +{ + 0x2, /* Revision */ + Package () { /* Power Limit 1 */ + 0, /* PowerLimitIndex, 0 for Power Limit 1 */ + 1600, /* PowerLimitMinimum */ + 4500, /* PowerLimitMaximum */ + 1000, /* TimeWindowMinimum */ + 1000, /* TimeWindowMaximum */ + 200 /* StepSize */ + }, + Package () { /* Power Limit 2 */ + 1, /* PowerLimitIndex, 1 for Power Limit 2 */ + 3000, /* PowerLimitMinimum */ + 7000, /* PowerLimitMaximum */ + 1000, /* TimeWindowMinimum */ + 1000, /* TimeWindowMaximum */ + 1000 /* StepSize */ + } +}) + +/* Include DPTF */ +#include <soc/intel/skylake/acpi/dptf/dptf.asl> diff --git a/src/mainboard/google/poppy/variants/baseboard/include/baseboard/ec.h b/src/mainboard/google/poppy/variants/baseboard/include/baseboard/ec.h new file mode 100644 index 0000000000..157dc8f424 --- /dev/null +++ b/src/mainboard/google/poppy/variants/baseboard/include/baseboard/ec.h @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BASEBOARD_EC_H__ +#define __BASEBOARD_EC_H__ + +#include <ec/ec.h> +#include <ec/google/chromeec/ec_commands.h> + +#include <variant/gpio.h> + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_OVERLOAD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP)) + +#define MAINBOARD_EC_SMI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)) + +/* EC can wake from S5 with lid or power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) + +/* + * EC can wake from S3 with lid or power button or key press or + * mode change event. + */ +#define MAINBOARD_EC_S3_WAKE_EVENTS \ + (MAINBOARD_EC_S5_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE)) + +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC)) + +/* + * ACPI related definitions for ASL code. + */ + +/* Enable EC backed ALS device in ACPI */ +#define EC_ENABLE_ALS_DEVICE + +/* Enable LID switch and provide wake pin for EC */ +#define EC_ENABLE_LID_SWITCH +#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE + +#define SIO_EC_MEMMAP_ENABLE /* EC Memory Map Resources */ +#define SIO_EC_HOST_ENABLE /* EC Host Interface Resources */ + +#define EC_ENABLE_MKBP_DEVICE /* Enable cros_ec_keyb device */ + +#endif diff --git a/src/mainboard/google/poppy/variants/baseboard/include/baseboard/gpio.h b/src/mainboard/google/poppy/variants/baseboard/include/baseboard/gpio.h new file mode 100644 index 0000000000..57d5e18b67 --- /dev/null +++ b/src/mainboard/google/poppy/variants/baseboard/include/baseboard/gpio.h @@ -0,0 +1,401 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef __BASEBOARD_GPIO_H__ +#define __BASEBOARD_GPIO_H__ + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* EC in RW */ +#define GPIO_EC_IN_RW GPP_C6 + +/* BIOS Flash Write Protect */ +#define GPIO_PCH_WP GPP_C23 + +/* Memory configuration board straps */ +#define GPIO_MEM_CONFIG_0 GPP_C12 +#define GPIO_MEM_CONFIG_1 GPP_C13 +#define GPIO_MEM_CONFIG_2 GPP_C14 +#define GPIO_MEM_CONFIG_3 GPP_C15 + +/* EC wake is LAN_WAKE# which is a special DeepSX wake pin */ +#define GPE_EC_WAKE GPE0_LAN_WAK + +/* eSPI virtual wire reporting */ +#define EC_SCI_GPI GPE0_ESPI + +#ifndef __ACPI__ +/* Pad configuration in ramstage */ +/* Leave eSPI pins untouched from default settings */ +static const struct pad_config gpio_table[] = { + /* A0 : RCIN# ==> NC(TP41) */ + PAD_CFG_NC(GPP_A0), + /* A1 : ESPI_IO0 */ + /* A2 : ESPI_IO1 */ + /* A3 : ESPI_IO2 */ + /* A4 : ESPI_IO3 */ + /* A5 : ESPI_CS# */ + /* A6 : SERIRQ ==> NC(TP44) */ + PAD_CFG_NC(GPP_A6), + /* A7 : PIRQA# ==> NC */ + PAD_CFG_NC(GPP_A7), + /* A8 : CLKRUN# ==> NC(TP45) */ + PAD_CFG_NC(GPP_A8), + /* A9 : ESPI_CLK */ + /* A10 : CLKOUT_LPC1 ==> NC */ + PAD_CFG_NC(GPP_A10), + /* A11 : PME# ==> NC(TP67) */ + PAD_CFG_NC(GPP_A11), + /* A12 : BM_BUSY# ==> NC */ + PAD_CFG_NC(GPP_A12), + /* A13 : SUSWARN# ==> NC */ + PAD_CFG_NC(GPP_A13), + /* A14 : ESPI_RESET# */ + /* A15 : SUSACK# ==> SUSACK_L */ + PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1), + /* A16 : SD_1P8_SEL ==> SD_PWR_1800_SEL */ + PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1), + /* A17 : SD_PWR_EN# ==> EN_SD_SOCKET_PWR_L */ + PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1), + /* A18 : ISH_GP0 ==> NC */ + PAD_CFG_NC(GPP_A18), + /* A19 : ISH_GP1 ==> NC */ + PAD_CFG_NC(GPP_A19), + /* A20 : ISH_GP2 ==> ACCEL_GYRO_INT_L */ + PAD_CFG_GPI_APIC(GPP_A20, NONE, PLTRST), + /* A21 : ISH_GP3 ==> NC */ + PAD_CFG_NC(GPP_A21), + /* A22 : ISH_GP4 ==> NC */ + PAD_CFG_NC(GPP_A22), + /* A23 : ISH_GP5 ==> NC */ + PAD_CFG_NC(GPP_A23), + + /* B0 : CORE_VID0 ==> NC(TP42) */ + PAD_CFG_NC(GPP_B0), + /* B1 : CORE_VID1 ==> NC(TP43) */ + PAD_CFG_NC(GPP_B1), + /* B2 : VRALERT# ==> NC */ + PAD_CFG_NC(GPP_B2), + /* B3 : CPU_GP2 ==> NC */ + PAD_CFG_NC(GPP_B3), + /* B4 : CPU_GP3 ==> NC */ + PAD_CFG_NC(GPP_B4), + /* B5 : SRCCLKREQ0# ==> NC */ + PAD_CFG_NC(GPP_B5), + /* B6 : SRCCLKREQ1# ==> WLAN_PCIE_CLKREQ_L */ + PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), + /* B7 : SRCCLKREQ2# ==> WWAN_PCIE_CLKREQ_L */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), + /* B8 : SRCCLKREQ3# ==> NC */ + PAD_CFG_NC(GPP_B8), + /* B9 : SRCCLKREQ4# ==> NC */ + PAD_CFG_NC(GPP_B9), + /* B10 : SRCCLKREQ5# ==> NC */ + PAD_CFG_NC(GPP_B10), + /* B11 : EXT_PWR_GATE# ==> NC */ + PAD_CFG_NC(GPP_B11), + /* B12 : SLP_S0# ==> SLP_S0_L_G */ + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + /* B13 : PLTRST# ==> PLT_RST_L */ + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + /* B14 : SPKR ==> NC */ + PAD_CFG_NC(GPP_B14), + /* B15 : GSPI0_CS# ==> PCH_SPI_H1_3V3_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : GSPI0_CLK ==> PCH_SPI_H1_3V3_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : GSPI0_MISO ==> PCH_SPI_H1_3V3_MISO */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : GSPI0_MOSI ==> PCH_SPI_H1_3V3_MOSI */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* B19 : GSPI1_CS# ==> PCH_SPI_FP_CS_L */ + PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1), + /* B20 : GSPI1_CLK ==> PCH_SPI_FP_CLK */ + PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1), + /* B21 : GSPI1_MISO ==> PCH_SPI_FP_MISO */ + PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1), + /* B22 : GSPI1_MOSI ==> PCH_SPI_FP_MOSI */ + PAD_CFG_NF(GPP_B22, NONE, DEEP, NF1), + /* B23 : SM1ALERT# ==> NC */ + PAD_CFG_NC(GPP_B23), + + /* C0 : SMBCLK ==> NC */ + PAD_CFG_NC(GPP_C0), + /* C1 : SMBDATA ==> NC */ + PAD_CFG_NC(GPP_C1), + /* C2 : SMBALERT# ==> NC */ + PAD_CFG_NC(GPP_C2), + /* C3 : SML0CLK ==> NC */ + PAD_CFG_NC(GPP_C3), + /* C4 : SML0DATA ==> NC */ + PAD_CFG_NC(GPP_C4), + /* C5 : SML0ALERT# ==> NC */ + PAD_CFG_NC(GPP_C5), + /* C6 : SM1CLK ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_C6, 20K_PU, DEEP), + /* C7 : SM1DATA ==> NC */ + PAD_CFG_NC(GPP_C7), + /* C8 : UART0_RXD ==> FP_INT */ + PAD_CFG_GPI_APIC(GPP_C8, NONE, PLTRST), + /* C9 : UART0_TXD ==> FP_RST_ODL */ + PAD_CFG_GPO(GPP_C9, 0, DEEP), /* FP_RST_ODL */ + /* C10 : UART0_RTS# ==> NC */ + PAD_CFG_NC(GPP_C10), + /* C11 : UART0_CTS# ==> NC */ + PAD_CFG_NC(GPP_C11), + /* C12 : UART1_RXD ==> PCH_MEM_CONFIG[0] */ + PAD_CFG_GPI(GPP_C12, NONE, DEEP), + /* C13 : UART1_TXD ==> PCH_MEM_CONFIG[1] */ + PAD_CFG_GPI(GPP_C13, NONE, DEEP), + /* C14 : UART1_RTS# ==> PCH_MEM_CONFIG[2] */ + PAD_CFG_GPI(GPP_C14, NONE, DEEP), + /* C15 : UART1_CTS# ==> PCH_MEM_CONFIG[3] */ + PAD_CFG_GPI(GPP_C15, NONE, DEEP), + /* C16 : I2C0_SDA ==> PCH_I2C0_TOUCHSCREEN_3V3_SDA */ + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), + /* C17 : I2C0_SCL ==> PCH_I2C0_TOUCHSCREEN_3V3_SCL */ + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), + /* C18 : I2C1_SDA ==> PCH_I2C1_NFC_3V3_SDA */ + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + /* C19 : I2C1_SCL ==> PCH_I2C1_NFC_3V3_SCL */ + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + /* C20 : UART2_RXD ==> PCHRX_SERVOTX_UART */ + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), + /* C21 : UART2_TXD ==> PCHTX_SERVORX_UART */ + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), + /* C22 : UART2_RTS# ==> EN_PP3300_DX_TOUCHSCREEN */ + PAD_CFG_GPO(GPP_C22, 1, DEEP), + /* C23 : UART2_CTS# ==> PCH_WP */ + PAD_CFG_GPI(GPP_C23, 20K_PU, DEEP), + + /* D0 : SPI1_CS# ==> NC */ + PAD_CFG_NC(GPP_D0), + /* D1 : SPI1_CLK ==> PEN_IRQ_L */ + PAD_CFG_GPI_APIC(GPP_D1, NONE, PLTRST), + /* D2 : SPI1_MISO ==> PEN_PDCT_L */ + PAD_CFG_GPI(GPP_D2, NONE, DEEP), + /* D3 : SPI1_MOSI ==> NC */ + PAD_CFG_NC(GPP_D3), + /* D4 : FASHTRIG ==> NC */ + PAD_CFG_NC(GPP_D4), + /* D5 : ISH_I2C0_SDA ==> ISH_I2C_SENSOR_1V8_SDA */ + PAD_CFG_NF_1V8(GPP_D5, NONE, DEEP, NF1), + /* D6 : ISH_I2C0_SCL ==> ISH_I2C_SENSOR_1V8_SCL */ + PAD_CFG_NF_1V8(GPP_D6, NONE, DEEP, NF1), + /* D7 : ISH_I2C1_SDA ==> NC */ + PAD_CFG_NC(GPP_D7), + /* D8 : ISH_I2C1_SCL ==> NC */ + PAD_CFG_NC(GPP_D8), + /* D9 : ISH_SPI_CS# ==> HP_IRQ_GPIO */ + PAD_CFG_GPI(GPP_D9, NONE, PLTRST), + /* D10 : ISH_SPI_CLK ==> SPKR_RST_L */ + PAD_CFG_GPO(GPP_D10, 1, DEEP), + /* D11 : ISH_SPI_MISO ==> SPKR_INT_L */ + PAD_CFG_GPI_APIC(GPP_D11, NONE, PLTRST), + /* D12 : ISH_SPI_MOSI ==> NC */ + PAD_CFG_NC(GPP_D12), + /* D13 : ISH_UART0_RXD ==> NC */ + PAD_CFG_NC(GPP_D13), + /* D14 : ISH_UART0_TXD ==> NC */ + PAD_CFG_NC(GPP_D14), + /* D15 : ISH_UART0_RTS# ==> MIC_IRQ_L */ + PAD_CFG_GPI_APIC(GPP_D15, NONE, PLTRST), + /* D16 : ISH_UART0_CTS# ==> NC */ + PAD_CFG_NC(GPP_D16), + /* D17 : DMIC_CLK1 */ + PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1), + /* D18 : DMIC_DATA1 */ + PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1), + /* D19 : DMIC_CLK0 */ + PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), + /* D20 : DMIC_DATA0 */ + PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), + /* D21 : SPI1_IO2 ==> NC */ + PAD_CFG_NC(GPP_D21), + /* D22 : SPI1_IO3 ==> BOOT_BEEP_OVERRIDE */ + PAD_CFG_GPO(GPP_D22, 1, DEEP), + /* D23 : I2S_MCLK ==> I2S_MCLK_R */ + PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1), + + /* E0 : SATAXPCI0 ==> H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC_INVERT(GPP_E0, NONE, PLTRST), + /* E1 : SATAXPCIE1 ==> NC */ + PAD_CFG_NC(GPP_E1), + /* E2 : SATAXPCIE2 ==> NC */ + PAD_CFG_NC(GPP_E2), + /* E3 : CPU_GP0 ==> NC */ + PAD_CFG_NC(GPP_E3), + /* E4 : SATA_DEVSLP0 ==> NFC_RESET_ODL */ + PAD_CFG_GPO(GPP_E4, 0, DEEP), + /* E5 : SATA_DEVSLP1 ==> NFC_INT_L */ + PAD_CFG_GPI_APIC(GPP_E5, NONE, PLTRST), + /* E6 : SATA_DEVSLP2 ==> NFC_FW_DL */ + PAD_CFG_GPO(GPP_E6, 0, DEEP), /* NFC_FW_DL */ + /* E7 : CPU_GP1 ==> TOUCHSCREEN_INT_L */ + PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST), /* TOUCHSCREEN_INT_L */ + /* E8 : SATALED# ==> NC */ + PAD_CFG_NC(GPP_E8), + /* E9 : USB2_OCO# ==> USB_C0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB2_OC1# ==> USB_C1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + /* E11 : USB2_OC2# ==> TOUCHSCREEN_RESET_L */ + PAD_CFG_GPO(GPP_E11, 0, DEEP), + /* E12 : USB2_OC3# ==> USB2_OC3_L */ + PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), + /* E13 : DDPB_HPD0 ==> USB_C0_DP_HPD */ + PAD_CFG_NF(GPP_E13, 20K_PD, DEEP, NF1), + /* E14 : DDPC_HPD1 ==> USB_C1_DP_HPD */ + PAD_CFG_NF(GPP_E14, 20K_PD, DEEP, NF1), + /* E15 : DDPD_HPD2 ==> SD_CD# */ + PAD_CFG_GPI(GPP_E15, 20K_PU, DEEP), + /* E16 : DDPE_HPD3 ==> NC(TP244) */ + PAD_CFG_NC(GPP_E16), + /* E17 : EDP_HPD */ + PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), + /* E18 : DDPB_CTRLCLK ==> NC */ + PAD_CFG_NC(GPP_E18), + /* E19 : DDPB_CTRLDATA ==> NC */ + PAD_CFG_NC(GPP_E19), + /* E20 : DDPC_CTRLCLK ==> NC */ + PAD_CFG_NC(GPP_E20), + /* E21 : DDPC_CTRLDATA ==> NC */ + PAD_CFG_NC(GPP_E21), + /* E22 : DDPD_CTRLCLK ==> NC */ + PAD_CFG_NC(GPP_E22), + /* E23 : DDPD_CTRLDATA ==> NC */ + PAD_CFG_NC(GPP_E23), + + /* The next 4 pads are for bit banging the amplifiers, default to I2S */ + /* F0 : I2S2_SCLK ==> I2S2_SCLK_SPKR_R */ + PAD_CFG_GPI(GPP_F0, NONE, DEEP), + /* F1 : I2S2_SFRM ==> I2S2_SFRM_SPKR_R */ + PAD_CFG_GPI(GPP_F1, NONE, DEEP), + /* F2 : I2S2_TXD ==> I2S2_PCH_TX_SPKR_RX_R */ + PAD_CFG_GPI(GPP_F2, NONE, DEEP), + /* F3 : I2S2_RXD */ + PAD_CFG_GPI(GPP_F3, NONE, DEEP), + /* F4 : I2C2_SDA ==> PCH_I2C2_CAM_PMIC_1V8_SDA */ + PAD_CFG_NF_1V8(GPP_F4, NONE, DEEP, NF1), + /* F5 : I2C2_SCL ==> PCH_I2C2_CAM_PMIC_1V8_SCL */ + PAD_CFG_NF_1V8(GPP_F5, NONE, DEEP, NF1), + /* F6 : I2C3_SDA ==> PCH_I2C3_PEN_1V8_SDA */ + PAD_CFG_NF_1V8(GPP_F6, NONE, DEEP, NF1), + /* F7 : I2C3_SCL ==> PCH_I2C3_PEN_1V8_SCL */ + PAD_CFG_NF_1V8(GPP_F7, NONE, DEEP, NF1), + /* F8 : I2C4_SDA ==> PCH_I2C4_UFCAM_1V8_SDA */ + PAD_CFG_NF_1V8(GPP_F8, NONE, DEEP, NF1), + /* F9 : I2C4_SCL ==> PCH_I2C4_UFCAM_1V8_SCL */ + PAD_CFG_NF_1V8(GPP_F9, NONE, DEEP, NF1), + /* F10 : I2C5_SDA ==> PCH_I2C5_AUDIO_1V8_SDA */ + PAD_CFG_NF_1V8(GPP_F10, NONE, DEEP, NF1), + /* F11 : I2C5_SCL ==> PCH_I2C5_AUDIO_1V8_SCL */ + PAD_CFG_NF_1V8(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_CMD */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA0 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA1 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA2 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA3 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA4 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA5 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA6 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_DATA7 */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_RCLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_CLK */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + /* F23 : RSVD ==> NC */ + PAD_CFG_NC(GPP_F23), + + /* G0 : SD_CMD */ + PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1), + /* G1 : SD_DATA0 */ + PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1), + /* G2 : SD_DATA1 */ + PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1), + /* G3 : SD_DATA2 */ + PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1), + /* G4 : SD_DATA3 */ + PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1), + /* G5 : SD_CD# */ + PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1), + /* G6 : SD_CLK */ + PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1), + /* G7 : SD_WP */ + PAD_CFG_NF(GPP_G7, 20K_PD, DEEP, NF1), + + /* GPD0: BATLOW# ==> PCH_BATLOW_L */ + PAD_CFG_NF(GPD0, NONE, DEEP, NF1), + /* GPD1: ACPRESENT ==> EC_PCH_ACPRESENT */ + PAD_CFG_NF(GPD1, NONE, DEEP, NF1), + /* GPD2: LAN_WAKE# ==> EC_PCH_WAKE_R_L */ + PAD_CFG_NF(GPD2, NONE, DEEP, NF1), + /* GPD3: PWRBTN# ==> PCH_PWR_BTN_L */ + PAD_CFG_NF(GPD3, 20K_PU, DEEP, NF1), + /* GPD4: SLP_S3# ==> SLP_S3_L */ + PAD_CFG_NF(GPD4, NONE, DEEP, NF1), + /* GPD5: SLP_S4# ==> SLP_S4_L */ + PAD_CFG_NF(GPD5, NONE, DEEP, NF1), + /* GPD6: SLP_A# ==> NC(TP26) */ + PAD_CFG_NC(GPD6), + /* GPD7: RSVD ==> NC */ + PAD_CFG_NC(GPD7), + /* GPD8: SUSCLK ==> PCH_SUSCLK */ + PAD_CFG_NF(GPD8, NONE, DEEP, NF1), + /* GPD9: SLP_WLAN# ==> NC(TP25) */ + PAD_CFG_NC(GPD9), + /* GPD10: SLP_S5# ==> NC(TP15) */ + PAD_CFG_NC(GPD10), /* TP15 */ + /* GPD11: LANPHYC ==> NC */ + PAD_CFG_NC(GPD11), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B15 : GSPI0_CS# ==> PCH_SPI_H1_3V3_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : GSPI0_CLK ==> PCH_SPI_H1_3V3_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : GSPI0_MISO ==> PCH_SPI_H1_3V3_MISO */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : GSPI0_MOSI ==> PCH_SPI_H1_3V3_MOSI */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + + /* Ensure UART pins are in native mode for H1. */ + /* C20 : UART2_RXD ==> PCHRX_SERVOTX_UART */ + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), + /* C21 : UART2_TXD ==> PCHTX_SERVORX_UART */ + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), + + /* C23 : UART2_CTS# ==> PCH_WP */ + PAD_CFG_GPI(GPP_C23, 20K_PU, DEEP), + + /* E0 : SATAXPCI0 ==> H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC_INVERT(GPP_E0, NONE, PLTRST), +}; + +#endif /* __ACPI__ */ + +#endif /* BASEBOARD_GPIO_H */ diff --git a/src/mainboard/google/poppy/variants/poppy/include/variant/acpi/dptf.asl b/src/mainboard/google/poppy/variants/poppy/include/variant/acpi/dptf.asl new file mode 100644 index 0000000000..a9ec74269f --- /dev/null +++ b/src/mainboard/google/poppy/variants/poppy/include/variant/acpi/dptf.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/acpi/dptf.asl> diff --git a/src/mainboard/google/poppy/variants/poppy/include/variant/ec.h b/src/mainboard/google/poppy/variants/poppy/include/variant/ec.h new file mode 100644 index 0000000000..ef47d3751c --- /dev/null +++ b/src/mainboard/google/poppy/variants/poppy/include/variant/ec.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MAINBOARD_EC_H__ +#define __MAINBOARD_EC_H__ + +#include <baseboard/ec.h> + +#endif /* __MAINBOARD_EC_H__ */ diff --git a/src/mainboard/google/poppy/variants/poppy/include/variant/gpio.h b/src/mainboard/google/poppy/variants/poppy/include/variant/gpio.h new file mode 100644 index 0000000000..4f79495e4f --- /dev/null +++ b/src/mainboard/google/poppy/variants/poppy/include/variant/gpio.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef __MAINBOARD_GPIO_H__ +#define __MAINBOARD_GPIO_H__ + +#include <baseboard/gpio.h> + +#endif /* __MAINBOARD_GPIO_H__ */ |