diff options
Diffstat (limited to 'src/mainboard/google/poppy/variants/atlas/devicetree.cb')
-rw-r--r-- | src/mainboard/google/poppy/variants/atlas/devicetree.cb | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/src/mainboard/google/poppy/variants/atlas/devicetree.cb b/src/mainboard/google/poppy/variants/atlas/devicetree.cb new file mode 100644 index 0000000000..3d31c40ce3 --- /dev/null +++ b/src/mainboard/google/poppy/variants/atlas/devicetree.cb @@ -0,0 +1,338 @@ +chip soc/intel/skylake + + # Deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "1" + register "deep_s5_enable_dc" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN | DSX_DIS_AC_PRESENT_PD" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + # Enable DPTF + register "dptf_enable" = "1" + + # Enable S0ix + register "s0ix_enable" = "1" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "0" # FIXME: enable once MIPI is ready + register "SaImguEnable" = "0" # FIXME: enable once MIPI is ready + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "0" + register "IshEnable" = "0" # FIXME: enable once ISH is ready + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "FspSkipMpInit" = "1" + register "SaGv" = "3" + register "SerialIrqConfigSirqEnable" = "1" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "1" + register "VmxEnable" = "1" + + register "speed_shift_enable" = "1" + register "dptf_enable" = "1" + register "tdp_pl2_override" = "15" + register "psys_pmax" = "45" + register "tcc_offset" = "10" + register "pch_trip_temp" = "75" + register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 2A | 2A | 2A | 2A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 4A | 24A | 24A | 24A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 14.9 | 5 | 5.7 | 4.57 | + #| DcLoadline | 14.2 | 4.86 | 4.2 | 4.3 | + #+----------------+-------+-------+-------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(4), + .voltage_limit = 1520, + .ac_loadline = 1490, + .dc_loadline = 1420, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + .ac_loadline = 500, + .dc_loadline = 486, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + .ac_loadline = 570, + .dc_loadline = 420, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + .ac_loadline = 457, + .dc_loadline = 430, + }" + + # PCIe Root port 1 with SRCCLKREQ1# + register "PcieRpEnable[0]" = "1" + register "PcieRpClkReqSupport[0]" = "1" + register "PcieRpClkReqNumber[0]" = "1" + register "PcieRpClkSrcNumber[0]" = "1" + register "PcieRpAdvancedErrorReporting[0]" = "1" + register "PcieRpLtrEnable[0]" = "1" + + # USB 2.0 + register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Empty + register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 + register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Empty + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Empty + + # USB 3.0 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + + # Touchscreen + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" + register "i2c[0]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 98, + .fall_time_ns = 38, + }" + + # Trackpad + register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" + register "i2c[2]" = "{ + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 186, + .scl_hcnt = 93, + .sda_hold = 36, + }, + }" + + # Camera + register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" + register "i2c[3]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 98, + .fall_time_ns = 38, + }" + + # Audio + register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" + register "i2c[4]" = "{ + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 176, + .scl_hcnt = 95, + .sda_hold = 36, + } + }" + + # GSPI0 for cr50 TPM + register "gspi[0]" = "{ + .speed_mhz = 1, + .early_init = 1, + }" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, + [PchSerialIoIndexSpi0] = PchSerialIoPci, + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, + [PchSerialIoIndexUart0] = PchSerialIoSkipInit, + [PchSerialIoIndexUart1] = PchSerialIoDisabled, + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 on end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 - Touchscreen + device pci 15.1 off end # I2C #1 + device pci 15.2 on end # I2C #2 - Trackpad + device pci 15.3 on end # I2C #3 - Camera + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 on + chip drivers/i2c/max98373 + register "vmon_slot_no" = "4" + register "imon_slot_no" = "5" + register "uid" = "0" + register "desc" = ""RIGHT SPEAKER AMP"" + register "name" = ""MAXR"" + device i2c 31 on end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "6" + register "imon_slot_no" = "7" + register "uid" = "1" + register "desc" = ""LEFT SPEAKER AMP"" + register "name" = ""MAXL"" + device i2c 32 on end + end + chip drivers/i2c/da7219 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "btn_cfg" = "50" + register "mic_det_thr" = "500" + register "jack_ins_deb" = "20" + register "jack_det_rate" = ""32ms_64ms"" + register "jack_rem_deb" = "1" + register "a_d_btn_thr" = "0xa" + register "d_b_btn_thr" = "0x16" + register "b_c_btn_thr" = "0x21" + register "c_mic_btn_thr" = "0x3e" + register "btn_avg" = "4" + register "adc_1bit_rpt" = "1" + register "micbias_lvl" = "2600" + register "mic_amp_in_sel" = ""diff"" + device i2c 1a on end + end + end # I2C #4 - Audio + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_DW0_00" + device pci 00.0 on end + end + end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 on + chip drivers/spi/acpi + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cr50"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)" + device spi 0 on end + end + end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 off end # SDCard + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end |