diff options
Diffstat (limited to 'src/mainboard/google/poppy/devicetree.cb')
-rw-r--r-- | src/mainboard/google/poppy/devicetree.cb | 420 |
1 files changed, 0 insertions, 420 deletions
diff --git a/src/mainboard/google/poppy/devicetree.cb b/src/mainboard/google/poppy/devicetree.cb deleted file mode 100644 index d232028544..0000000000 --- a/src/mainboard/google/poppy/devicetree.cb +++ /dev/null @@ -1,420 +0,0 @@ -chip soc/intel/skylake - - # Deep Sx states - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "1" - register "deep_s5_enable_ac" = "1" - register "deep_s5_enable_dc" = "1" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x000c0201" - # EC memory map range is 0x900-0x9ff - register "gen3_dec" = "0x00fc0901" - - # Enable DPTF - register "dptf_enable" = "1" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "0" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "1" - register "IoBufferOwnership" = "3" - register "EnableTraceHub" = "0" - register "XdciEnable" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "1" - register "SaImguEnable" = "1" - register "ScsEmmcEnabled" = "1" - register "ScsEmmcHs400Enabled" = "1" - register "ScsSdCardEnabled" = "2" - register "IshEnable" = "0" - register "PttSwitch" = "0" - register "InternalGfx" = "1" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "FspSkipMpInit" = "1" - register "SaGv" = "3" - register "SerialIrqConfigSirqEnable" = "1" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "1" # 1s - register "PmConfigSlpSusMinAssert" = "1" # 500ms - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "1" - register "SendVrMbxCmd" = "1" # IMVP8 workaround - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # VR Settings Configuration for 4 Domains - #+----------------+-------+-------+-------+-------+ - #| Domain/Setting | SA | IA | GTUS | GTS | - #+----------------+-------+-------+-------+-------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 7A | 34A | 35A | 35A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-------+-------+-------+-------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(7), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(34), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - - # Enable Root port 1. - register "PcieRpEnable[0]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[0]" = "1" - # RP 1 uses SRCCLKREQ1# - register "PcieRpClkReqNumber[0]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port - register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty - - register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" # Touchscreen - register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" # NFC - register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" # Camera - register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" # Pen - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # Camera - register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" # Audio - - # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM - # communication before memory is up. - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, - }" - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoPci, - [PchSerialIoIndexI2C3] = PchSerialIoPci, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoPci, - [PchSerialIoIndexSpi0] = PchSerialIoPci, - [PchSerialIoIndexSpi1] = PchSerialIoPci, - [PchSerialIoIndexUart0] = PchSerialIoPci, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - register "speed_shift_enable" = "1" - register "tdp_pl2_override" = "7" - register "tcc_offset" = "10" # TCC of 90C - - # Use default SD card detect GPIO configuration - register "sdcard_cd_gpio_default" = "GPP_E15" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ATML0001"" - register "desc" = ""Atmel Touchscreen"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" - register "probed" = "1" - device i2c 4b on end - end - end # I2C #0 - device pci 15.1 on end # I2C #1 - device pci 15.2 on - chip drivers/intel/mipi_camera - register "acpi_hid" = ""INT3472"" - register "acpi_name" = ""PMIC"" - register "chip_name" = ""TPS68470 PMIC"" - register "device_type" = "INTEL_ACPI_CAMERA_PMIC" - device i2c 4d on end - end - chip drivers/intel/mipi_camera - register "acpi_hid" = ""OVTID850"" - register "acpi_name" = ""CAM0"" - register "chip_name" = ""OV 13850 Camera"" - register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - - # Camera SSDB buffer - register "ssdb.sensor_card_sku" = "0x50" - register "ssdb.link_used" = "0x00" - register "ssdb.lanes_used" = "0x04" - register "ssdb.rom_type" = "0x08" - register "ssdb.vcm_type" = "0x03" - register "ssdb.platform" = "0x09" - register "ssdb.flash_support" = "0x02" - register "ssdb.privacy_led" = "0x01" - register "ssdb.degree" = "0x00" - register "ssdb.mipi_define" = "0x01" - register "ssdb.mclk" = "0x016E3600" - - # Sensor PWDB entries - register "num_pwdb_entries" = "5" - - register "pwdb[0].name" = ""VSIO"" - register "pwdb[0].value" = "1800600" - register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" - register "pwdb[0].delay_usec" = "0" - - register "pwdb[1].name" = ""tps68470-a"" - register "pwdb[1].value" = "19200000" - register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_CLK" - register "pwdb[1].delay_usec" = "0" - - register "pwdb[2].name" = ""ANA"" - register "pwdb[2].value" = "2815200" - register "pwdb[2].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" - register "pwdb[2].delay_usec" = "3000" - - register "pwdb[3].name" = ""s_resetn"" - register "pwdb[3].value" = "1" - register "pwdb[3].entry_type" = "INTEL_ACPI_CAMERA_GPIO" - register "pwdb[3].delay_usec" = "0" - - register "pwdb[4].name" = ""CORE"" - register "pwdb[4].value" = "1200000" - register "pwdb[4].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" - register "pwdb[4].delay_usec" = "3000" - - device i2c 10 on end - end - chip drivers/intel/mipi_camera - register "acpi_hid" = ""DW9714"" - register "acpi_name" = ""VCM0"" - register "chip_name" = ""Dongwoon AF DAC"" - register "device_type" = "INTEL_ACPI_CAMERA_VCM" - - # VCM PWDB entries - register "num_pwdb_entries" = "2" - register "pwdb[0].name" = ""VSIO"" - register "pwdb[0].value" = "1800600" - register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" - register "pwdb[0].delay_usec" = "0" - - register "pwdb[1].name" = ""VCM"" - register "pwdb[1].value" = "2815200" - register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" - register "pwdb[1].delay_usec" = "3000" - - device i2c 0xc on end - end - end # I2C #2 - device pci 15.3 on - chip drivers/i2c/hid - register "generic.hid" = ""WCOM50C1"" - register "generic.desc" = ""WCOM Digitizer"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)" - register "hid_desc_reg_offset" = "0x1" - device i2c 0x9 on end - end - end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 off end # SATA - device pci 19.0 on end # UART #2 - device pci 19.1 on - chip drivers/i2c/max98927 - register "interleave_mode" = "1" - register "uid" = "0" - register "desc" = ""SSM4567 Right Speaker Amp"" - register "name" = ""MAXR"" - device i2c 39 on end - end - chip drivers/i2c/max98927 - register "interleave_mode" = "1" - register "uid" = "1" - register "desc" = ""SSM4567 Left Speaker Amp"" - register "name" = ""MAXL"" - device i2c 3A on end - end - chip drivers/i2c/generic - register "hid" = ""10EC5663"" - register "name" = ""RT53"" - register "desc" = ""Realtek RT5663"" - register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D9)" - register "probed" = "1" - device i2c 13 on end - end - end # I2C #5 - device pci 19.2 on - chip drivers/intel/mipi_camera - register "acpi_hid" = ""INT3479"" - register "acpi_name" = ""CAM1"" - register "chip_name" = ""OV 5670 Camera"" - register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - - # Camera SSDB buffer - register "ssdb.sensor_card_sku" = "0x50" - register "ssdb.link_used" = "0x01" - register "ssdb.lanes_used" = "0x02" - register "ssdb.rom_type" = "0x08" - register "ssdb.vcm_type" = "0x03" - register "ssdb.platform" = "0x09" - register "ssdb.flash_support" = "0x02" - register "ssdb.privacy_led" = "0x01" - register "ssdb.mipi_define" = "0x01" - register "ssdb.mclk" = "0x016E3600" - - # Sensor PWDB entries - register "num_pwdb_entries" = "6" - - register "pwdb[0].name" = ""VSIO"" - register "pwdb[0].value" = "1800600" - register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" - register "pwdb[0].delay_usec" = "0" - - register "pwdb[1].name" = ""AUX2"" - register "pwdb[1].value" = "1800600" - register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" - register "pwdb[1].delay_usec" = "0" - - register "pwdb[2].name" = ""tps68470-b"" - register "pwdb[2].value" = "19200000" - register "pwdb[2].entry_type" = "INTEL_ACPI_CAMERA_CLK" - register "pwdb[2].delay_usec" = "0" - - register "pwdb[3].name" = ""gpio.4"" - register "pwdb[3].value" = "1" - register "pwdb[3].entry_type" = "INTEL_ACPI_CAMERA_GPIO" - register "pwdb[3].delay_usec" = "3000" - - register "pwdb[4].name" = ""gpio.5"" - register "pwdb[4].value" = "1" - register "pwdb[4].entry_type" = "INTEL_ACPI_CAMERA_GPIO" - register "pwdb[4].delay_usec" = "0" - - register "pwdb[5].name" = ""AUX1"" - register "pwdb[5].value" = "1213200" - register "pwdb[5].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" - register "pwdb[5].delay_usec" = "3000" - - device i2c 10 on end - end - end # I2C #4 - device pci 1c.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_PCI_EXP" - device pci 00.0 on end - end - end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 off end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 on end # GSPI #0 - device pci 1e.3 on end # GSPI #1 - device pci 1e.4 on end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 on end # SDCard - device pci 1f.0 on - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end |