diff options
Diffstat (limited to 'src/mainboard/google/nyan_blaze/early_configs.c')
-rw-r--r-- | src/mainboard/google/nyan_blaze/early_configs.c | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/src/mainboard/google/nyan_blaze/early_configs.c b/src/mainboard/google/nyan_blaze/early_configs.c new file mode 100644 index 0000000000..c1f5f9b2f6 --- /dev/null +++ b/src/mainboard/google/nyan_blaze/early_configs.c @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <soc/addressmap.h> +#include <soc/clock.h> +#include <soc/nvidia/tegra/i2c.h> +#include <soc/nvidia/tegra124/gpio.h> +#include <soc/nvidia/tegra124/early_configs.h> + +static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; + +static void setup_pinmux(void) +{ + /* Write protect. */ + gpio_input_pullup(GPIO(R1)); + /* Recovery mode. */ + gpio_input_pullup(GPIO(Q7)); + /* Lid switch. */ + gpio_input_pullup(GPIO(R4)); + /* Power switch. */ + gpio_input_pullup(GPIO(Q0)); + /* Developer mode. */ + gpio_input_pullup(GPIO(Q6)); + /* EC in RW. */ + gpio_input_pullup(GPIO(U4)); + + /* route PU4/5 to GMI to remove conflict w/PWM1/2. */ + pinmux_set_config(PINMUX_GPIO_PU4_INDEX, + PINMUX_GPIO_PU4_FUNC_NOR); /* s/b GMI */ + pinmux_set_config(PINMUX_GPIO_PU5_INDEX, + PINMUX_GPIO_PU5_FUNC_NOR); /* s/b GMI */ + + /* SOC and TPM reset GPIO, active low. */ + gpio_output(GPIO(I5), 1); + + /* SPI1 MOSI */ + pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + /* SPI1 MISO */ + pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + /* SPI1 SCLK */ + pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + /* SPI1 CS0 */ + pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + + /* I2C3 (cam) clock. */ + pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX, + PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE); + /* I2C3 (cam) data. */ + pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX, + PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE); + + /* switch unused pin to GPIO */ + gpio_set_mode(GPIO(X3), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X4), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X5), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X6), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X7), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(W3), GPIO_MODE_GPIO); +} + +static void configure_ec_spi_bus(void) +{ + clock_configure_source(sbc1, CLK_M, 3000); +} + +static void configure_tpm_i2c_bus(void) +{ + clock_configure_i2c_scl_freq(i2c3, PLLP, 400); + + i2c_init(2); +} + +void early_mainboard_init(void) +{ + clock_enable_clear_reset(0, CLK_H_SBC1, CLK_U_I2C3, 0, 0, 0); + setup_pinmux(); + configure_ec_spi_bus(); + configure_tpm_i2c_bus(); +} |