diff options
Diffstat (limited to 'src/mainboard/google/kahlee/variants/delan/devicetree.cb')
| -rw-r--r-- | src/mainboard/google/kahlee/variants/delan/devicetree.cb | 188 |
1 files changed, 0 insertions, 188 deletions
diff --git a/src/mainboard/google/kahlee/variants/delan/devicetree.cb b/src/mainboard/google/kahlee/variants/delan/devicetree.cb deleted file mode 100644 index b9cfe1ba7e..0000000000 --- a/src/mainboard/google/kahlee/variants/delan/devicetree.cb +++ /dev/null @@ -1,188 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2015-2017 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -chip soc/amd/stoneyridge - register "spd_addr_lookup" = " - { - { {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0 - }" - register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP" - register "uma_mode" = "UMAMODE_SPECIFIED_SIZE" - register "uma_size" = "32 * MiB" - - # Enable I2C0 for audio, USB3 hub at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 85, - .fall_time_ns = 3, - }" - - # Enable I2C1 for H1 at 400kHz - register "i2c[1]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 3, - .fall_time_ns = 2, - }" - - # Enable I2C2 for trackpad, pen at 400kHz - register "i2c[2]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 3, - .fall_time_ns = 2, - }" - - # Enable I2C3 for touchscreen at 400kHz - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 16, - .fall_time_ns = 8, - }" - - device cpu_cluster 0 on - device lapic 10 on end - end - device domain 0 on - device pci 0.0 on end # Root Complex - device pci 0.2 off end # IOMMU (Disabled for performance and battery) - device pci 1.0 on end # Internal Graphics P2P bridge 0x98e4 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # - device pci 2.2 on end # - device pci 2.3 on end # - device pci 2.4 on - chip drivers/generic/bayhub - register "power_saving" = "1" - device pci 00.0 on end - end - end # - device pci 2.5 on end # - device pci 8.0 on end # PSP - device pci 9.0 on end # PCIe Host Bridge - device pci 9.2 on end # HDA - device pci 10.0 on end # xHCI - device pci 11.0 off end # SATA - device pci 12.0 on end # EHCI - device pci 14.0 on # SMbus - end # SMbus - device pci 14.3 on - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC - device pci 14.7 on end # SD - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - end #domain - device mmio 0xfedc2000 on - chip drivers/generic/adau7002 - device generic 0.0 on end - end - chip drivers/i2c/da7219 - register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)" - register "btn_cfg" = "50" - register "mic_det_thr" = "500" - register "jack_ins_deb" = "20" - register "jack_det_rate" = ""32ms_64ms"" - register "jack_rem_deb" = "1" - register "a_d_btn_thr" = "0xa" - register "d_b_btn_thr" = "0x16" - register "b_c_btn_thr" = "0x21" - register "c_mic_btn_thr" = "0x3e" - register "btn_avg" = "4" - register "adc_1bit_rpt" = "1" - register "micbias_lvl" = "2600" - register "mic_amp_in_sel" = ""diff"" - register "mclk_name" = ""oscout1"" - device i2c 1a on end - end - chip drivers/generic/max98357a - register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)" - register "sdmode_delay" = "5" - device generic 0.1 on end - end - end - device mmio 0xfedc3000 on - chip drivers/i2c/tpm - register "hid" = ""GOOG0005"" - register "desc" = ""Cr50 TPM"" - register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)" - device i2c 50 on end - end - end - device mmio 0xfedc4000 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)" - register "wake" = "7" - register "probed" = "1" - device i2c 15 on end - end - chip drivers/i2c/hid - register "generic.hid" = ""PNP0C50"" - register "generic.desc" = ""Synaptics Touchpad"" - register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)" - register "generic.wake" = "7" - register "generic.probed" = "1" - register "hid_desc_reg_offset" = "0x20" - device i2c 2c on end - end - end - device mmio 0xfedc5000 on - chip drivers/i2c/generic - register "hid" = ""RAYD0001"" - register "desc" = ""Raydium Touchscreen"" - register "probed" = "1" - register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" - register "reset_delay_ms" = "20" - register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" - register "enable_delay_ms" = "1" - register "has_power_resource" = "1" - device i2c 39 on end - end - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "probed" = "1" - register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" - register "reset_delay_ms" = "20" - register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" - register "enable_delay_ms" = "1" - register "has_power_resource" = "1" - device i2c 10 on end - end - chip drivers/i2c/hid - register "generic.hid" = ""WDHT0002"" - register "generic.desc" = ""WDT Touchscreen"" - register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" - register "generic.probed" = "1" - register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" - register "generic.reset_delay_ms" = "130" - register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" - register "generic.enable_delay_ms" = "2" - register "generic.has_power_resource" = "1" - register "generic.disable_gpio_export_in_crs" = "1" - register "hid_desc_reg_offset" = "0x20" - device i2c 2c on end - end - end -end #chip soc/amd/stoneyridge |