1 files changed, 85 insertions, 0 deletions
diff --git a/src/mainboard/google/hatch/variants/kohaku/memory.c b/src/mainboard/google/hatch/variants/kohaku/memory.c
new file mode 100644
index 0000000000..27ae3d8fb2
--- /dev/null
+++ b/src/mainboard/google/hatch/variants/kohaku/memory.c
@@ -0,0 +1,85 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <baseboard/gpio.h>
+#include <gpio.h>
+#include <soc/cnl_memcfg_init.h>
+#include <string.h>
+
+static const struct cnl_mb_cfg baseboard_memcfg = {
+	/*
+	 * The dqs_map arrays map the SoC pins to the lpddr3 pins
+	 * for both channels.
+	 *
+	 * "The index of the array is CPU byte number, the values are DRAM byte
+	 * numbers." - doc #573387
+	 *
+	 * the index = pin number on SoC
+	 * the value = pin number on lpddr3 part
+	 */
+	.dqs_map[DDR_CH0] = { 0, 1, 3, 2, 5, 7, 6, 4 },
+	.dqs_map[DDR_CH1] = { 1, 3, 2, 0, 5, 7, 6, 4 },
+
+	.dq_map[DDR_CH0] = {
+		{0xf, 0xf0},
+		{0x0, 0xf0},
+		{0xf, 0xf0},
+		{0xf, 0x0},
+		{0xff, 0x0},
+		{0xff, 0x0}
+		},
+	.dq_map[DDR_CH1] = {
+		{0xf, 0xf0},
+		{0x0, 0xf0},
+		{0xf, 0xf0},
+		{0xf, 0x0},
+		{0xff, 0x0},
+		{0xff, 0x0}
+		},
+
+	/* Kohaku uses 200, 80.6 and 162 rcomp resistors */
+	.rcomp_resistor = { 200, 81, 162 },
+
+	/* Kohaku Rcomp target values */
+	.rcomp_targets = { 100, 40, 40, 23, 40 },
+
+	/* Set CaVref config to 0 for LPDDR3 */
+	.vref_ca_config = 0,
+
+	/* Disable Early Command Training */
+	.ect = 0,
+};
+
+void variant_memory_params(struct cnl_mb_cfg *bcfg)
+{
+	memcpy(bcfg, &baseboard_memcfg, sizeof(baseboard_memcfg));
+	/*
+	 * GPP_F2 is the MEM_CH_SEL gpio, which is set to 1 for single
+	 * channel skus and 0 for dual channel skus.
+	 */
+	if (gpio_get(GPP_F2) == 1) {
+		/*
+		 * Single channel config: for kohaku, Channel 0 is
+		 * always populated.
+		 */
+		bcfg->channel_empty[0] = 0;
+		bcfg->channel_empty[1] = 1;
+	} else {
+		/* Dual channel config: both channels populated. */
+		bcfg->channel_empty[0] = 0;
+		bcfg->channel_empty[1] = 0;
+	}
+}