diff options
Diffstat (limited to 'src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb')
| -rw-r--r-- | src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb b/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb deleted file mode 100644 index 03218675c0..0000000000 --- a/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb +++ /dev/null @@ -1,162 +0,0 @@ -chip soc/intel/cannonlake - - # Intel Common SoC Config - #+-------------------+---------------------------+ - #| Field | Value | - #+-------------------+---------------------------+ - #| GSPI0 | cr50 TPM. Early init is | - #| | required to set up a BAR | - #| | for TPM communication | - #| | before memory is up | - #| GSPI1 | FP MCU | - #| I2C0 | Touchpad | - #| I2C1 | Touch screen | - #| I2C4 | Audio | - #+-------------------+---------------------------+ - register "common_soc_config" = "{ - .gspi[0] = { - .speed_mhz = 1, - .early_init = 1, - }, - .i2c[0] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[1] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[4] = { - .speed = I2C_SPEED_FAST, - }, - }" - - # GPIO for SD card detect - register "sdcard_cd_gpio" = "vSD3_CD_B" - - # USB configuration - register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Discrete BT - - device domain 0 on - device pci 14.0 on - chip drivers/usb/acpi - register "desc" = ""Root Hub"" - register "type" = "UPC_TYPE_HUB" - device usb 0.0 on - chip drivers/usb/acpi - register "desc" = ""Discrete bluetooth"" - register "type" = "UPC_TYPE_INTERNAL" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" - device usb 2.4 on end - end - end - end - end # USB xHCI - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D21_IRQ)" - register "wake" = "GPE0_DW0_21" - device i2c 15 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" - register "probed" = "1" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" - register "reset_delay_ms" = "100" - register "reset_off_delay_ms" = "5" - register "has_power_resource" = "1" - register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" - register "stop_off_delay_ms" = "5" - device i2c 49 on end - end - chip drivers/i2c/hid - register "generic.hid" = ""GDIX0000"" - register "generic.desc" = ""Goodix Touchscreen"" - register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" - register "generic.reset_delay_ms" = "10" - register "generic.reset_off_delay_ms" = "3" - register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" - register "generic.enable_delay_ms" = "12" - register "generic.has_power_resource" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 5d on end - end - chip drivers/generic/gpio_keys - register "name" = ""PENH"" - register "gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A8)" - register "key.wake" = "GPE0_DW0_08" - register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" - register "key.dev_name" = ""EJCT"" - register "key.linux_code" = "SW_PEN_INSERTED" - register "key.linux_input_type" = "EV_SW" - register "key.label" = ""pen_eject"" - device generic 0 on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 on - chip drivers/i2c/sx9310 - register "desc" = ""SAR Proximity Sensor"" - register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A0)" - register "speed" = "I2C_SPEED_FAST" - register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" - device i2c 28 on end - end - end # I2C #3 - device pci 19.0 on - chip drivers/i2c/generic - register "hid" = ""10EC5682"" - register "name" = ""RT58"" - register "desc" = ""Realtek RT5682"" - register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" - register "property_count" = "1" - # Set the jd_src to RT5668_JD1 for jack detection - register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" - register "property_list[0].name" = ""realtek,jd-src"" - register "property_list[0].integer" = "1" - device i2c 1a on end - end - end #I2C #4 - device pci 1e.3 on - chip drivers/spi/acpi - register "name" = ""CRFP"" - register "hid" = "ACPI_DT_NAMESPACE_HID" - register "uid" = "1" - register "compat_string" = ""google,cros-ec-spi"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A23_IRQ)" - device spi 1 on end - end # FPMCU - end # GSPI #1 - end - -end |