summaryrefslogtreecommitdiff
path: root/src/mainboard/google/guybrush/bootblock.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google/guybrush/bootblock.c')
-rw-r--r--src/mainboard/google/guybrush/bootblock.c24
1 files changed, 3 insertions, 21 deletions
diff --git a/src/mainboard/google/guybrush/bootblock.c b/src/mainboard/google/guybrush/bootblock.c
index 2791a8ff6f..800e70a294 100644
--- a/src/mainboard/google/guybrush/bootblock.c
+++ b/src/mainboard/google/guybrush/bootblock.c
@@ -1,15 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-#include <amdblocks/acpimmio.h>
#include <amdblocks/espi.h>
-#include <amdblocks/lpc.h>
#include <bootblock_common.h>
#include <baseboard/variants.h>
#include <console/console.h>
#include <delay.h>
-#include <device/pci_ops.h>
-#include <soc/lpc.h>
-#include <soc/pci_devs.h>
+#include <soc/espi.h>
#include <soc/southbridge.h>
#include <timer.h>
@@ -30,16 +26,10 @@ void mb_set_up_early_espi(void)
void bootblock_mainboard_early_init(void)
{
- uint32_t dword;
size_t num_gpios, override_num_gpios;
const struct soc_amd_gpio *gpios, *override_gpios;
- /* Beware that the bit definitions for LPC_LDRQ0_PU_EN and LPC_LDRQ0_PD_EN are swapped
- on Picasso and older compared to Renoir/Cezanne and newer */
- dword = pci_read_config32(SOC_LPC_DEV, LPC_MISC_CONTROL_BITS);
- dword &= ~(LPC_LDRQ0_PU_EN | LPC_LDRQ1_EN | LPC_LDRQ0_EN);
- dword |= LPC_LDRQ0_PD_EN;
- pci_write_config32(SOC_LPC_DEV, LPC_MISC_CONTROL_BITS, dword);
+ espi_disable_lpc_ldrq();
/*
* All LPC decodes need to be cleared before we can configure the LPC pads as secondary
@@ -67,15 +57,7 @@ void bootblock_mainboard_early_init(void)
/* Early eSPI interface configuration */
- /* Use SPI2 pins for eSPI */
- dword = pm_read32(PM_SPI_PAD_PU_PD);
- dword |= PM_ESPI_CS_USE_DATA2;
- pm_write32(PM_SPI_PAD_PU_PD, dword);
-
- /* Switch the pads that can be used as either LPC or secondary eSPI to 1.8V mode */
- dword = pm_read32(PM_ACPI_CONF);
- dword |= PM_ACPI_S5_LPC_PIN_MODE | PM_ACPI_S5_LPC_PIN_MODE_SEL;
- pm_write32(PM_ACPI_CONF, dword);
+ espi_switch_to_spi2_pads();
}
void bootblock_mainboard_init(void)