diff options
Diffstat (limited to 'src/mainboard/google/glados')
22 files changed, 1109 insertions, 0 deletions
diff --git a/src/mainboard/google/glados/Kconfig b/src/mainboard/google/glados/Kconfig index 5bed271a13..9ef8736dc2 100644 --- a/src/mainboard/google/glados/Kconfig +++ b/src/mainboard/google/glados/Kconfig @@ -13,6 +13,7 @@ config BOARD_GOOGLE_BASEBOARD_GLADOS select HAVE_ACPI_TABLES select HAVE_OPTION_TABLE select HAVE_SMI_HANDLER + select INTEL_GMA_HAVE_VBT if !BOARD_GOOGLE_GLADOS select MAINBOARD_HAS_CHROMEOS select MAINBOARD_HAS_LPC_TPM select MAINBOARD_HAS_TPM1 @@ -35,6 +36,7 @@ config MAINBOARD_DIR config MAINBOARD_PART_NUMBER string + default "Chell" if BOARD_GOOGLE_CHELL default "Glados" if BOARD_GOOGLE_GLADOS config MAINBOARD_FAMILY @@ -43,10 +45,12 @@ config MAINBOARD_FAMILY config VARIANT_DIR string + default "chell" if BOARD_GOOGLE_CHELL default "glados" if BOARD_GOOGLE_GLADOS config DEVICETREE string + default "variants/chell/devicetree.cb" if BOARD_GOOGLE_CHELL default "variants/glados/devicetree.cb" if BOARD_GOOGLE_GLADOS config MAX_CPUS @@ -64,14 +68,17 @@ config INCLUDE_NHLT_BLOBS config EC_GOOGLE_CHROMEEC_BOARDNAME string + default "chell" if BOARD_GOOGLE_CHELL default "glados" if BOARD_GOOGLE_GLADOS config EC_GOOGLE_CHROMEEC_PD_BOARDNAME string + default "chell_pd" if BOARD_GOOGLE_CHELL default "glados_pd" if BOARD_GOOGLE_GLADOS config GBB_HWID string depends on CHROMEOS + default "CHELL TEST 6297" if BOARD_GOOGLE_CHELL default "GLADOS TEST 1988" if BOARD_GOOGLE_GLADOS endif diff --git a/src/mainboard/google/glados/Kconfig.name b/src/mainboard/google/glados/Kconfig.name index b1c6db22b9..1f2365437b 100644 --- a/src/mainboard/google/glados/Kconfig.name +++ b/src/mainboard/google/glados/Kconfig.name @@ -1,5 +1,10 @@ comment "Glados" +config BOARD_GOOGLE_CHELL + bool "-> Chell (HP Chromebook 13 G1)" + select BOARD_GOOGLE_BASEBOARD_GLADOS + select NHLT_SSM4567 if INCLUDE_NHLT_BLOBS + config BOARD_GOOGLE_GLADOS bool "-> Glados Skylake Reference Board" select BOARD_GOOGLE_BASEBOARD_GLADOS diff --git a/src/mainboard/google/glados/romstage.c b/src/mainboard/google/glados/romstage.c index 07f0ff0aca..4f93f61114 100644 --- a/src/mainboard/google/glados/romstage.c +++ b/src/mainboard/google/glados/romstage.c @@ -22,10 +22,16 @@ #include <soc/pei_wrapper.h> #include <soc/romstage.h> #include "spd/spd.h" +#include <variant/ec.h> #include <variant/gpio.h> void mainboard_romstage_entry(struct romstage_params *params) { +#ifdef EC_ENABLE_KEYBOARD_BACKLIGHT + /* Turn on keyboard backlight to indicate we are booting */ + if (params->power_state->prev_sleep_state != ACPI_S3) + google_chromeec_kbbacklight(25); +#endif /* Get SPD index */ gpio_t spd_gpios[] = { GPIO_MEM_CONFIG_0, diff --git a/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNN8GTALAR.spd.hex b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNN8GTALAR.spd.hex new file mode 100644 index 0000000000..5c1332e57c --- /dev/null +++ b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNN8GTALAR.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 05 19 05 03 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 00 CA FA 00 00 00 A8 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 00 00 +48 39 43 43 4E 4E 4E 38 47 54 41 4C 41 52 2D 4E +55 44 00 00 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNN8GTMLAR.spd.hex b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNN8GTMLAR.spd.hex new file mode 100644 index 0000000000..c4041702c6 --- /dev/null +++ b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNN8GTMLAR.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 05 19 05 03 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 80 ca fa 00 00 00 A8 00 08 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 00 00 00 55 00 00 00 00 00 +48 39 43 43 4E 4E 4E 38 47 54 4D 4C 41 52 2D 4E +55 44 00 00 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNBJTALAR.spd.hex b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNBJTALAR.spd.hex new file mode 100644 index 0000000000..7c7c8d2026 --- /dev/null +++ b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNBJTALAR.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 05 19 05 0B 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 00 CA FA 00 00 00 A8 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 00 00 +48 39 43 43 4E 4E 4E 42 4A 54 41 4C 41 52 2D 4E +55 44 00 00 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNBJTMLAR.spd.hex b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNBJTMLAR.spd.hex new file mode 100644 index 0000000000..2f66a2a14a --- /dev/null +++ b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNBJTMLAR.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 05 19 05 0B 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 80 CA FA 00 00 00 A8 00 08 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 00 00 00 55 00 00 00 00 00 +48 39 43 43 4E 4E 4E 42 4A 54 4D 4C 41 52 2D 4E +55 44 00 00 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNCLGALAR.spd.hex b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNCLGALAR.spd.hex new file mode 100644 index 0000000000..24c032b61c --- /dev/null +++ b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNCLGALAR.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 05 1A 05 0A 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 00 CA FA 00 00 00 A8 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 00 00 +48 39 43 43 4E 4E 4E 43 4C 47 41 4C 41 52 2D 4E +55 44 00 00 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNCLTMLAR.spd.hex b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNCLTMLAR.spd.hex new file mode 100644 index 0000000000..df2819f1ec --- /dev/null +++ b/src/mainboard/google/glados/spd/hynix_dimm_H9CCNNNCLTMLAR.spd.hex @@ -0,0 +1,19 @@ +# SK Hynix H9CCNNNCLTMLAR-NUD_178b_QDP LPDDR3 +# 8Gb die (256Mx16), x32 @ 1866 (14-15-15-34) +# 2 rank per channel, 2 SDRAMs per rank, 4x16Gb = 8GB per channel +91 20 F1 03 05 1A 05 0A 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 80 CA FA 00 00 00 A8 00 08 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 55 00 00 00 00 00 +48 39 43 43 4E 4E 4E 43 4C 54 4D 4C 41 52 2D 4E +55 44 00 00 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/samsung_dimm_K4E6E304EB-EGCF.spd.hex b/src/mainboard/google/glados/spd/samsung_dimm_K4E6E304EB-EGCF.spd.hex new file mode 100644 index 0000000000..f2916308d2 --- /dev/null +++ b/src/mainboard/google/glados/spd/samsung_dimm_K4E6E304EB-EGCF.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 05 19 05 0B 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 00 CA FA 00 00 00 A8 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 55 00 00 00 00 00 +4B 34 45 36 45 33 30 34 45 42 2D 45 47 43 46 20 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/samsung_dimm_K4E8E304EE-EGCF.spd.hex b/src/mainboard/google/glados/spd/samsung_dimm_K4E8E304EE-EGCF.spd.hex new file mode 100644 index 0000000000..24167ebd0a --- /dev/null +++ b/src/mainboard/google/glados/spd/samsung_dimm_K4E8E304EE-EGCF.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 04 11 05 0B 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 10 04 3C 3C 01 90 00 00 +00 00 CA FA 00 00 00 A8 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 55 00 00 00 00 00 +4B 34 45 38 45 33 30 34 45 45 2D 45 47 43 46 20 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/samsung_dimm_K4E8E324EB-EGCF.spd.hex b/src/mainboard/google/glados/spd/samsung_dimm_K4E8E324EB-EGCF.spd.hex new file mode 100644 index 0000000000..7d72967a03 --- /dev/null +++ b/src/mainboard/google/glados/spd/samsung_dimm_K4E8E324EB-EGCF.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 05 19 05 03 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 00 CA FA 00 00 00 A8 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 55 00 00 00 00 00 +4B 34 45 38 45 33 32 34 45 42 2D 45 47 43 46 20 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/spd/samsung_dimm_K4EBE304EB-EGCF.spd.hex b/src/mainboard/google/glados/spd/samsung_dimm_K4EBE304EB-EGCF.spd.hex new file mode 100644 index 0000000000..930d27f39a --- /dev/null +++ b/src/mainboard/google/glados/spd/samsung_dimm_K4EBE304EB-EGCF.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 05 1A 05 0A 03 11 01 08 09 00 40 05 +78 78 90 50 90 11 50 E0 90 06 3C 3C 01 90 00 00 +00 00 CA FA 00 00 00 A8 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 55 00 00 00 00 00 +4B 34 45 42 45 33 30 34 45 42 2D 45 47 43 46 20 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/glados/variants/chell/Makefile.inc b/src/mainboard/google/glados/variants/chell/Makefile.inc new file mode 100644 index 0000000000..986bdd8552 --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/Makefile.inc @@ -0,0 +1,48 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2015 Google Inc. +## Copyright (C) 2015 Intel Corporation +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +romstage-y += variant.c +ramstage-y += variant.c +smm-y += variant.c + +SPD_BIN = $(obj)/spd.bin + +# SPD data by index. No method for board identification yet +SPD_SOURCES = samsung_dimm_K4E8E304EE-EGCF # 0b0000 +SPD_SOURCES += samsung_dimm_K4E6E304EE-EGCF # 0b0001 +SPD_SOURCES += hynix_dimm_H9CCNNN8GTMLAR # 0b0010 +SPD_SOURCES += hynix_dimm_H9CCNNNBJTMLAR # 0b0011 +SPD_SOURCES += hynix_dimm_H9CCNNNCLTMLAR # 0b0100 +SPD_SOURCES += samsung_dimm_K4E6E304EB-EGCF # 0b0101 +SPD_SOURCES += samsung_dimm_K4EBE304EB-EGCF # 0b0110 +SPD_SOURCES += samsung_dimm_K4E8E324EB-EGCF # 0b0111 +SPD_SOURCES += hynix_dimm_H9CCNNNBJTALAR # 0b1000 +SPD_SOURCES += hynix_dimm_H9CCNNNCLGALAR # 0b1001 +SPD_SOURCES += hynix_dimm_H9CCNNN8GTALAR # 0b1010 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/glados/variants/chell/board_info.txt b/src/mainboard/google/glados/variants/chell/board_info.txt new file mode 100644 index 0000000000..d1630c8d6e --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Google +Board name: Chell (HP Chromebook 13 G1) +Category: laptop +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/google/glados/variants/chell/data.vbt b/src/mainboard/google/glados/variants/chell/data.vbt Binary files differnew file mode 100644 index 0000000000..a654a5efd5 --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/data.vbt diff --git a/src/mainboard/google/glados/variants/chell/devicetree.cb b/src/mainboard/google/glados/variants/chell/devicetree.cb new file mode 100644 index 0000000000..b9d072f8a1 --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/devicetree.cb @@ -0,0 +1,298 @@ +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "1" + register "deep_s5_enable_dc" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "0" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "0" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "SerialIrqConfigSirqEnable" = "1" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "1" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 5 Domains + #+----------------+-------+-------+-------------+-------------+-------+ + #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(7), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(34), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_RING]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(34), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + # Enable Root port 1. + register "PcieRpEnable[0]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[0]" = "1" + # RP 1 uses SRCCLKREQ1# + register "PcieRpClkReqNumber[0]" = "1" + + register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2 + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD + + register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, + [PchSerialIoIndexUart0] = PchSerialIoPci, + [PchSerialIoIndexUart1] = PchSerialIoDisabled, + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, + }" + + # PL2 override 15W + register "tdp_pl2_override" = "15" + + register "tcc_offset" = "10" # TCC of 90C + + # Send an extra VR mailbox command for the supported MPS IMVP8 model + register "SendVrMbxCmd" = "1" + + # Lock Down + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 15 on end + end + end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" # R389 + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0c" + register "sar_threshold[1]" = "0x1c" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "0" # VDDA + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "7" # 512ms + device i2c 1a on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "uid" = "0" + device i2c 34 on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "uid" = "1" + device i2c 35 on end + end + end # I2C #4 + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_DW0_16" + device pci 00.0 on end + end + end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 off end # SDCard + device pci 1f.0 on + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/google/glados/variants/chell/include/variant/acpi/dptf.asl b/src/mainboard/google/glados/variants/chell/include/variant/acpi/dptf.asl new file mode 100644 index 0000000000..ad370982ab --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/include/variant/acpi/dptf.asl @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 99 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "Ambient" +#define DPTF_TSR0_PASSIVE 55 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "Charger" +#define DPTF_TSR1_PASSIVE 55 +#define DPTF_TSR1_CRITICAL 75 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "DRAM" +#define DPTF_TSR2_PASSIVE 52 +#define DPTF_TSR2_CRITICAL 75 + +#define DPTF_TSR3_SENSOR_ID 4 +#define DPTF_TSR3_SENSOR_NAME "WiFi" +#define DPTF_TSR3_PASSIVE 55 +#define DPTF_TSR3_CRITICAL 70 + +/* SKL-Y is Fanless design. */ +#undef DPTF_ENABLE_FAN_CONTROL + +/* Enable DPTF charger control */ +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x7b7, "mA", 0 }, /* 1975mA (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1500mA */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1000mA */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 500mA */ + Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 }, /* 0mA */ +}) + +Name (DTRT, Package () { + /* CPU Throttle Effect on CPU */ + Package () { \_SB.PCI0.B0D4, \_SB.PCI0.B0D4, 100, 50, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 0 */ + Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR0, 100, 600, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 1 */ + Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR1, 100, 600, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 2 */ + Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR2, 100, 90, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 3 */ + Package () { \_SB.PCI0.B0D4, \_SB.DPTF.TSR3, 100, 600, 0, 0, 0, 0 }, +}) + +Name (MPPC, Package () +{ + 0x2, /* Revision */ + Package () { /* Power Limit 1 */ + 0, /* PowerLimitIndex, 0 for Power Limit 1 */ + 3000, /* PowerLimitMinimum */ + 6000, /* PowerLimitMaximum */ + 1000, /* TimeWindowMinimum */ + 1000, /* TimeWindowMaximum */ + 250 /* StepSize */ + }, + Package () { /* Power Limit 2 */ + 1, /* PowerLimitIndex, 1 for Power Limit 2 */ + 15000, /* PowerLimitMinimum */ + 15000, /* PowerLimitMaximum */ + 1000, /* TimeWindowMinimum */ + 1000, /* TimeWindowMaximum */ + 1000 /* StepSize */ + } +}) diff --git a/src/mainboard/google/glados/variants/chell/include/variant/acpi/mainboard.asl b/src/mainboard/google/glados/variants/chell/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000000..aa465fae4f --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/include/variant/acpi/mainboard.asl @@ -0,0 +1,159 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope (\_SB.PCI0.XHCI.RHUB.HS01) +{ + // Left Rear USB 2.0 Type-C + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + Zero, // USB Port + Zero, // Reserved + Zero // Reserved + }) + + // Visible + Method (_PLD, 0, NotSerialized) + { + Return (GPLD (One)) + } +} +Scope (\_SB.PCI0.XHCI.RHUB.HS02) +{ + // Left Rear USB 2.0 Type-C + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + Zero, // USB Port + Zero, // Reserved + Zero // Reserved + }) + + // Visible + Method (_PLD, 0, NotSerialized) + { + Return (GPLD (One)) + } +} +Scope (\_SB.PCI0.XHCI.RHUB.HS03) +{ + // Bluetooth + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + 0xFF, // OEM Connector + Zero, // Reserved + Zero // Reserved + }) + + // Not Visible + Method (_PLD, 0, NotSerialized) + { + Return (GPLD (Zero)) + } +} +Scope (\_SB.PCI0.XHCI.RHUB.HS04) +{ + // SD Card + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + 0xFF, // OEM Connector + Zero, // Reserved + Zero // Reserved + }) + + // Not Visible + Method (_PLD, 0, NotSerialized) + { + Return (GPLD (Zero)) + } +} +Scope (\_SB.PCI0.XHCI.RHUB.HS05) +{ + // Left USB 2.0 Type-A + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + Zero, // USB Port + Zero, // Reserved + Zero // Reserved + }) + + // Visible + Method (_PLD, 0, NotSerialized) + { + Return (GPLD (One)) + } +} +Scope (\_SB.PCI0.XHCI.RHUB.HS07) +{ + // Webcam + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + 0xFF, // OEM Connector + Zero, // Reserved + Zero // Reserved + }) + + // Not Visible + Method (_PLD, 0, NotSerialized) + { + Return (GPLD (Zero)) + } +} +Scope (\_SB.PCI0.XHCI.RHUB.SS01) +{ + // Left Rear USB 3.0 Type-C + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + 0x03, // USB 3.0 Port + Zero, // Reserved + Zero // Reserved + }) +} +Scope (\_SB.PCI0.XHCI.RHUB.SS02) +{ + // Left Front USB 3.0 Type-C + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + 0x03, // USB 3.0 Port + Zero, // Reserved + Zero // Reserved + }) +} +Scope (\_SB.PCI0.XHCI.RHUB.SS03) +{ + // Left USB 3.0 Type-A + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + 0x03, // USB 3.0 Port + Zero, // Reserved + Zero // Reserved + }) +} +Scope (\_SB.PCI0.XHCI.RHUB.SS04) +{ + // SD Card + Name (_UPC, Package (0x04) + { + 0xFF, // Connectable + 0x03, // USB 3.0 + Zero, // Reserved + Zero // Reserved + }) +} diff --git a/src/mainboard/google/glados/variants/chell/include/variant/ec.h b/src/mainboard/google/glados/variants/chell/include/variant/ec.h new file mode 100644 index 0000000000..be6c0a55d6 --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/include/variant/ec.h @@ -0,0 +1,17 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Enable EC backed Keyboard Backlight in ACPI */ +#define EC_ENABLE_KEYBOARD_BACKLIGHT diff --git a/src/mainboard/google/glados/variants/chell/include/variant/gpio.h b/src/mainboard/google/glados/variants/chell/include/variant/gpio.h new file mode 100644 index 0000000000..ebece32f12 --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/include/variant/gpio.h @@ -0,0 +1,242 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* EC in RW */ +#define GPIO_EC_IN_RW GPP_C6 + +/* BIOS Flash Write Protect */ +#define GPIO_PCH_WP GPP_C23 + +/* Memory configuration board straps */ +#define GPIO_MEM_CONFIG_0 GPP_C12 +#define GPIO_MEM_CONFIG_1 GPP_C13 +#define GPIO_MEM_CONFIG_2 GPP_C14 +#define GPIO_MEM_CONFIG_3 GPP_C15 + +/* EC wake is LAN_WAKE# which is a special DeepSX wake pin */ +#define GPE_EC_WAKE GPE0_LAN_WAK + +/* GPP_B16 is WLAN_WAKE. GPP_B group is routed to DW0 in the GPE0 block */ +#define GPE_WLAN_WAKE GPE0_DW0_16 + +/* GPP_B5 is TOUCHPAD WAKE. GPP_B group is routed to DW0 in the GPE0 block */ +#define GPE_TOUCHPAD_WAKE GPE0_DW0_05 + +/* Input device interrupt configuration */ +#define TOUCHPAD_INT_L GPP_B3_IRQ +#define TOUCHSCREEN_INT_L GPP_E7_IRQ +#define MIC_INT_L GPP_F10_IRQ + +/* GPP_E16 is EC_SCI_L. GPP_E group is routed to DW2 in the GPE0 block */ +#define EC_SCI_GPI GPE0_DW2_16 +#define EC_SMI_GPI GPP_E15 + +/* Power rail control signals. */ +#define EN_PP3300_KEPLER GPP_C11 +#define EN_PP3300_DX_TOUCH GPP_C22 +#define EN_PP3300_DX_EMMC GPP_D5 +#define EN_PP1800_DX_EMMC GPP_D6 +#define EN_PP3300_DX_CAM GPP_D12 + +#ifndef __ACPI__ +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { +/* RCIN# */ PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), +/* LAD0 */ PAD_CFG_NF(GPP_A1, 20K_PU, DEEP, NF1), +/* LAD1 */ PAD_CFG_NF(GPP_A2, 20K_PU, DEEP, NF1), +/* LAD2 */ PAD_CFG_NF(GPP_A3, 20K_PU, DEEP, NF1), +/* LAD3 */ PAD_CFG_NF(GPP_A4, 20K_PU, DEEP, NF1), +/* LFRAME# */ PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), +/* SERIRQ */ PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), +/* PIRQA# */ PAD_CFG_NC(GPP_A7), +/* CLKRUN# */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), +/* CLKOUT_LPC0 */ PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1), +/* CLKOUT_LPC1 */ PAD_CFG_NC(GPP_A10), +/* PME# */ PAD_CFG_GPO(GPP_A11, 0, DEEP), +/* BM_BUSY# */ PAD_CFG_NC(GPP_A12), +/* SUSWARN# */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), +/* SUS_STAT# */ PAD_CFG_GPO(GPP_A14, 0, DEEP), +/* SUSACK# */ PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1), +/* SD_1P8_SEL */ PAD_CFG_NC(GPP_A16), +/* SD_PWR_EN# */ PAD_CFG_NC(GPP_A17), +/* ISH_GP0 */ PAD_CFG_NC(GPP_A18), +/* ISH_GP1 */ PAD_CFG_NC(GPP_A19), +/* ISH_GP2 */ PAD_CFG_NC(GPP_A20), +/* ISH_GP3 */ PAD_CFG_NC(GPP_A21), +/* ISH_GP4 */ PAD_CFG_NC(GPP_A22), +/* ISH_GP5 */ PAD_CFG_NC(GPP_A23), +/* CORE_VID0 */ PAD_CFG_GPO(GPP_B0, 0, DEEP), +/* CORE_VID1 */ PAD_CFG_GPO(GPP_B1, 0, DEEP), +/* VRALERT# */ PAD_CFG_NC(GPP_B2), +/* CPU_GP2 */ PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST), /* TRACKPAD_INT_L */ +/* CPU_GP3 */ PAD_CFG_GPO(GPP_B4, 1, DEEP), /* TOUCHSCREEN_EN */ +/* SRCCLKREQ0# */ PAD_CFG_GPI_ACPI_SCI(GPP_B5, NONE, DEEP, YES), /* TRACKPAD WAKE */ +/* SRCCLKREQ1# */ PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), /* WLAN CKLREQ */ +/* SRCCLKREQ2# */ PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), /* KEPLER CLKREQ */ +/* SRCCLKREQ3# */ PAD_CFG_NC(GPP_B8), +/* SRCCLKREQ4# */ PAD_CFG_NC(GPP_B9), +/* SRCCLKREQ5# */ PAD_CFG_NC(GPP_B10), +/* EXT_PWR_GATE# */ PAD_CFG_NC(GPP_B11), +/* SLP_S0# */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), +/* PLTRST# */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), +/* SPKR */ PAD_CFG_GPO(GPP_B14, 0, DEEP), +/* GSPI0_CS# */ PAD_CFG_NC(GPP_B15), +/* GSPI0_CLK */ PAD_CFG_GPI_ACPI_SCI(GPP_B16, NONE, DEEP, YES), /* WLAN WAKE */ +/* GSPI0_MISO */ PAD_CFG_NC(GPP_B17), +/* GSPI0_MOSI */ PAD_CFG_GPO(GPP_B18, 0, DEEP), +/* GSPI1_CS# */ PAD_CFG_NC(GPP_B19), +/* GSPI1_CLK */ PAD_CFG_NC(GPP_B20), +/* GSPI1_MISO */ PAD_CFG_NC(GPP_B21), +/* GSPI1_MOSI */ PAD_CFG_GPO(GPP_B22, 0, DEEP), +/* SM1ALERT# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_B23, NONE, DEEP), /* UNUSED */ +/* SMBCLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), /* XDP */ +/* SMBDATA */ PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), /* XDP */ +/* SMBALERT# */ PAD_CFG_GPO(GPP_C2, 0, DEEP), +/* SML0CLK */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C3, NONE, DEEP), /* UNUSED */ +/* SML0DATA */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C4, NONE, DEEP), /* UNUSED */ +/* SML0ALERT# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C5, NONE, DEEP), /* UNUSED */ +/* SM1CLK */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C6, 20K_PU, DEEP), /* EC_IN_RW */ +/* SM1DATA */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C7, NONE, DEEP), /* UNUSED */ +/* UART0_RXD */ PAD_CFG_NC(GPP_C8), +/* UART0_TXD */ PAD_CFG_NC(GPP_C9), +/* UART0_RTS# */ PAD_CFG_NC(GPP_C10), +/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 0, DEEP), /* EN_PP3300_KEPLER */ +/* UART1_RXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, NONE, DEEP), /* MEM_CONFIG[0] */ +/* UART1_TXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C13, NONE, DEEP), /* MEM_CONFIG[1] */ +/* UART1_RTS# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C14, NONE, DEEP), /* MEM_CONFIG[2] */ +/* UART1_CTS# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C15, NONE, DEEP), /* MEM_CONFIG[3] */ +/* I2C0_SDA */ PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), /* TOUCHSCREEN */ +/* I2C0_SCL */ PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), /* TOUCHSCREEN */ +/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), /* TRACKPAD */ +/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), /* TRACKPAD */ +/* UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* SERVO */ +/* UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* SERVO */ +/* UART2_RTS# */ PAD_CFG_GPO(GPP_C22, 1, DEEP), /* EN_PP3300_DX_TOUCH */ +/* UART2_CTS# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C23, 20K_PU, DEEP), /* PCH_WP */ +/* SPI1_CS# */ PAD_CFG_GPO(GPP_D0, 0, DEEP), +/* SPI1_CLK */ PAD_CFG_GPO(GPP_D1, 0, DEEP), +/* SPI1_MISO */ PAD_CFG_GPO(GPP_D2, 0, DEEP), +/* SPI1_MOSI */ PAD_CFG_GPO(GPP_D3, 0, DEEP), +/* FASHTRIG */ PAD_CFG_NC(GPP_D4), +/* ISH_I2C0_SDA */ PAD_CFG_GPO(GPP_D5, 1, DEEP), /* EN_PP3300_DX_EMMC */ +/* ISH_I2C0_SCL */ PAD_CFG_GPO(GPP_D6, 1, DEEP), /* EN_PP1800_DX_EMMC */ +/* ISH_I2C1_SDA */ PAD_CFG_NC(GPP_D7), +/* ISH_I2C1_SCL */ PAD_CFG_NC(GPP_D8), +/* ISH_SPI_CS# */ PAD_CFG_NC(GPP_D9), +/* ISH_SPI_CLK */ PAD_CFG_GPO(GPP_D10, 0, DEEP), /* USBA_1_ILIM_SEL_L */ +/* ISH_SPI_MISO */ PAD_CFG_NC(GPP_D11), +/* ISH_SPI_MOSI */ PAD_CFG_GPO(GPP_D12, 1, DEEP), /* EN_PP3300_DX_CAM */ +/* ISH_UART0_RXD */ PAD_CFG_NC(GPP_D13), +/* ISH_UART0_TXD */ PAD_CFG_NC(GPP_D14), +/* ISH_UART0_RTS# */ PAD_CFG_NC(GPP_D15), +/* ISH_UART0_CTS# */ PAD_CFG_NC(GPP_D16), +/* DMIC_CLK1 */ PAD_CFG_NC(GPP_D17), +/* DMIC_DATA1 */ PAD_CFG_NC(GPP_D18), +/* DMIC_CLK0 */ PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), +/* DMIC_DATA0 */ PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), +/* SPI1_IO2 */ PAD_CFG_GPO(GPP_D21, 0, DEEP), +/* SPI1_IO3 */ PAD_CFG_GPO(GPP_D22, 0, DEEP), /* I2S2 BUFFER */ +/* I2S_MCLK */ PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1), +/* SATAXPCI0 */ PAD_CFG_GPI_APIC(GPP_E0, NONE, PLTRST), /* TPM_PIRQ_L */ +/* SATAXPCIE1 */ PAD_CFG_NC(GPP_E1), +/* SATAXPCIE2 */ PAD_CFG_NC(GPP_E2), +/* CPU_GP0 */ PAD_CFG_GPO(GPP_E3, 1, DEEP), /* TOUCHSCREEN_RST_L */ +/* SATA_DEVSLP0 */ PAD_CFG_NC(GPP_E4), +/* SATA_DEVSLP1 */ PAD_CFG_NC(GPP_E5), +/* SATA_DEVSLP2 */ PAD_CFG_NC(GPP_E6), +/* CPU_GP1 */ PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST), /* TOUCHSCREEN_INT_L */ +/* SATALED# */ PAD_CFG_NC(GPP_E8), +/* USB2_OCO# */ PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), /* USBA_OC0_L */ +/* USB2_OC1# */ PAD_CFG_NC(GPP_E10), +/* USB2_OC2# */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), /* USBC_OC2_L */ +/* USB2_OC3# */ PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), /* USBC_OC3_L */ +/* DDPB_HPD0 */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), /* USB_C0_DP_HPD */ +/* DDPC_HPD1 */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), /* USB_C1_DP_HPD */ +/* DDPD_HPD2 */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES), /* EC_SMI_L */ +/* DDPE_HPD3 */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, DEEP, YES), /* EC_SCI_L */ +/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), +/* DDPB_CTRLCLK */ PAD_CFG_GPO(GPP_E18, 0, DEEP), +/* DDPB_CTRLDATA */ PAD_CFG_NC(GPP_E19), /* External pullup */ +/* DDPC_CTRLCLK */ PAD_CFG_NC(GPP_E20), +/* DDPC_CTRLDATA */ PAD_CFG_NC(GPP_E21), /* External pullup. */ +/* DDPD_CTRLCLK */ PAD_CFG_NC(GPP_E22), +/* DDPD_CTRLDATA */ PAD_CFG_NC(GPP_E23), +/* + * The next 4 pads are for bit banging the amplifiers. They are connected + * together with i2s0 signals. For default behavior of i2s make these + * gpio inputs. + */ +/* I2S2_SCLK */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F0, NONE, DEEP), +/* I2S2_SFRM */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F1, NONE, DEEP), +/* I2S2_TXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F2, NONE, DEEP), +/* I2S2_RXD */ PAD_CFG_GPI_GPIO_DRIVER(GPP_F3, NONE, DEEP), +/* I2C2_SDA */ PAD_CFG_NC(GPP_F4), +/* I2C2_SCL */ PAD_CFG_NC(GPP_F5), +/* I2C3_SDA */ PAD_CFG_NC(GPP_F6), +/* I2C3_SCL */ PAD_CFG_NC(GPP_F7), +/* I2C4_SDA */ PAD_CFG_NF_1V8(GPP_F8, NONE, DEEP, NF1), /* AUDIO1V8_SDA */ +/* I2C4_SCL */ PAD_CFG_NF_1V8(GPP_F9, NONE, DEEP, NF1), /* AUDIO1V8_SCL */ +/* I2C5_SDA */ PAD_CFG_GPI_APIC(GPP_F10, NONE, PLTRST), /* MIC_INT_L */ +/* I2C5_SCL */ PAD_CFG_GPO(GPP_F11, 0, DEEP), +/* EMMC_CMD */ PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), +/* EMMC_DATA0 */ PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), +/* EMMC_DATA1 */ PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), +/* EMMC_DATA2 */ PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), +/* EMMC_DATA3 */ PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), +/* EMMC_DATA4 */ PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), +/* EMMC_DATA5 */ PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), +/* EMMC_DATA6 */ PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), +/* EMMC_DATA7 */ PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), +/* EMMC_RCLK */ PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), +/* EMMC_CLK */ PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), +/* RSVD */ PAD_CFG_NC(GPP_F23), +/* SD_CMD */ PAD_CFG_NC(GPP_G0), +/* SD_DATA0 */ PAD_CFG_NC(GPP_G1), +/* SD_DATA1 */ PAD_CFG_NC(GPP_G2), +/* SD_DATA2 */ PAD_CFG_NC(GPP_G3), +/* SD_DATA3 */ PAD_CFG_NC(GPP_G4), +/* SD_CD# */ PAD_CFG_NC(GPP_G5), +/* SD_CLK */ PAD_CFG_NC(GPP_G6), +/* SD_WP */ PAD_CFG_NC(GPP_G7), +/* BATLOW# */ PAD_CFG_NF(GPD0, NONE, DEEP, NF1), +/* ACPRESENT */ PAD_CFG_NF(GPD1, NONE, DEEP, NF1), +/* LAN_WAKE# */ PAD_CFG_NF(GPD2, NONE, DEEP, NF1), /* EC_PCH_WAKE_L */ +/* PWRBTN# */ PAD_CFG_NF(GPD3, NONE, DEEP, NF1), +/* SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1), +/* SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1), +/* SLP_A# */ PAD_CFG_GPO(GPD6, 0, DEEP), +/* RSVD */ PAD_CFG_NC(GPD7), +/* SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1), +/* SLP_WLAN# */ PAD_CFG_GPO(GPD9, 0, DEEP), +/* SLP_S5# */ PAD_CFG_GPO(GPD10, 0, DEEP), +/* LANPHYC */ PAD_CFG_NC(GPD11), +}; + +/* Early pad configuration in romstage. */ +static const struct pad_config early_gpio_table[] = { +/* SRCCLKREQ2# */ PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), /* KEPLER */ +/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 0, DEEP), /* EN_PP3300_KEPLER */ +/* UART2_CTS# */ PAD_CFG_GPI_GPIO_DRIVER(GPP_C23, 20K_PU, DEEP), /* PCH_WP */ +}; + +#endif + +#endif diff --git a/src/mainboard/google/glados/variants/chell/variant.c b/src/mainboard/google/glados/variants/chell/variant.c new file mode 100644 index 0000000000..da83ed0f7d --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/variant.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/variant.h> +#include <gpio.h> +#include <stdint.h> +#include <string.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include <variant/gpio.h> + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + /* DQ byte map */ + const u8 dq_map[2][12] = { + { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0, + 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 }, + { 0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC, + 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00 } }; + /* DQS CPU<>DRAM map */ + const u8 dqs_map[2][8] = { + { 0, 3, 1, 2, 4, 5, 6, 7 }, + { 1, 0, 4, 5, 2, 3, 6, 7 } }; + + /* Rcomp resistor */ + const u16 RcompResistor[3] = { 200, 81, 162 }; + + /* Rcomp target */ + const u16 RcompTarget[5] = { 100, 40, 40, 23, 40 }; + + memcpy(pei_data->dq_map, dq_map, sizeof(dq_map)); + memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map)); + memcpy(pei_data->RcompResistor, RcompResistor, + sizeof(RcompResistor)); + memcpy(pei_data->RcompTarget, RcompTarget, + sizeof(RcompTarget)); +} + +void mainboard_gpio_smi_sleep(void) +{ + int i; + + /* Power down the rails on any sleep type. */ + gpio_t active_high_signals[] = { + EN_PP3300_KEPLER, + EN_PP3300_DX_TOUCH, + EN_PP3300_DX_EMMC, + EN_PP1800_DX_EMMC, + EN_PP3300_DX_CAM, + }; + + for (i = 0; i < ARRAY_SIZE(active_high_signals); i++) + gpio_set(active_high_signals[i], 0); +} |