diff options
Diffstat (limited to 'src/mainboard/google/glados/variants/lars/devicetree.cb')
| -rw-r--r-- | src/mainboard/google/glados/variants/lars/devicetree.cb | 19 |
1 files changed, 16 insertions, 3 deletions
diff --git a/src/mainboard/google/glados/variants/lars/devicetree.cb b/src/mainboard/google/glados/variants/lars/devicetree.cb index 76e614d423..419d14026c 100644 --- a/src/mainboard/google/glados/variants/lars/devicetree.cb +++ b/src/mainboard/google/glados/variants/lars/devicetree.cb @@ -9,6 +9,8 @@ chip soc/intel/skylake register "gpu_pch_backlight_pwm_hz" = "1000" # Enable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" register "deep_s5_enable_ac" = "1" register "deep_s5_enable_dc" = "1" register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" @@ -32,13 +34,23 @@ chip soc/intel/skylake register "dptf_enable" = "1" # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" register "EnableAzalia" = "1" register "DspEnable" = "1" register "IoBufferOwnership" = "3" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" register "SmbusEnable" = "1" + register "Cio2Enable" = "0" register "ScsEmmcEnabled" = "1" register "ScsEmmcHs400Enabled" = "1" register "ScsSdCardEnabled" = "0" + register "PttSwitch" = "0" register "SkipExtGfxScan" = "1" register "Device4Enable" = "1" register "HeciEnabled" = "0" @@ -124,7 +136,7 @@ chip soc/intel/skylake .voltage_limit = 1520, }" - # Enable Root port 1. + # Enable Root port 1 register "PcieRpEnable[0]" = "1" # Enable CLKREQ# register "PcieRpClkReqSupport[0]" = "1" @@ -143,8 +155,6 @@ chip soc/intel/skylake register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V - # Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, @@ -160,6 +170,9 @@ chip soc/intel/skylake [PchSerialIoIndexUart2] = PchSerialIoSkipInit, }" + # I2C4 is 1.8V + register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" + # PL2 override 25W register "tdp_pl2_override" = "25" |