2 files changed, 36 insertions, 0 deletions
diff --git a/src/mainboard/google/dedede/variants/boxy/Makefile.inc b/src/mainboard/google/dedede/variants/boxy/Makefile.inc
index eb2c9bc021..66f0263c62 100644
--- a/src/mainboard/google/dedede/variants/boxy/Makefile.inc
+++ b/src/mainboard/google/dedede/variants/boxy/Makefile.inc
@@ -1,3 +1,4 @@
 ## SPDX-License-Identifier: GPL-2.0-or-later
 
 ramstage-y += gpio.c
+ramstage-y += ramstage.c
diff --git a/src/mainboard/google/dedede/variants/boxy/ramstage.c b/src/mainboard/google/dedede/variants/boxy/ramstage.c
new file mode 100644
index 0000000000..c317d3b31a
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/boxy/ramstage.c
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/variants.h>
+
+/*
+ * Psys_pmax considerations
+ *
+ * Given the hardware design in boxy, the serial shunt resistor is 0.01ohm.
+ * The full scale of hardware PSYS signal 1.6v maps to system current 6.009A
+ * instead of real system power. The equation is shown below:
+ * PSYS = 1.6v ~= (0.01ohm x 6.009A) x 50 (INA213, gain 50V/V) x R631/(R631 + R638)
+ * R631/(R631 + R638) = 0.5325 = 36K / (36K + 31.6K)
+ *
+ * The Psys_pmax is a SW setting which tells IMVP9.1 the mapping between system input
+ * current and the actual system power. Since there is no voltage information
+ * from PSYS, different voltage input would map to different Psys_pmax settings:
+ * For Type-C 15V, the Psys_pmax should be 15v x 6.009A = 90.135W
+ * For Type-C 20V, the Psys_pmax should be 20v x 6.009A = 120.18W
+ * For a barrel jack, the Psys_pmax should be 19v x 6.009A = 114.171W
+ *
+ * Imagine that there is a type-c 100W (20V/5A) connected to DUT w/ full loading,
+ * and the Psys_pmax setting is 120W. Then IMVP9.1 can calculate the current system
+ * power = 120W * 5A / 6.009A = 100W, which is the actual system power.
+ */
+const struct psys_config psys_config = {
+	.efficiency = 97,
+	.psys_imax_ma = 6009,
+	.bj_volts_mv = 19000,
+	.bj_power_w = 65,
+};
+
+void variant_devtree_update(void)
+{
+	variant_update_psys_power_limits(&psys_config);
+}