1 files changed, 0 insertions, 143 deletions
diff --git a/src/mainboard/google/cyan/devicetree.cb b/src/mainboard/google/cyan/devicetree.cb
deleted file mode 100644
index 0454650c68..0000000000
--- a/src/mainboard/google/cyan/devicetree.cb
+++ /dev/null
@@ -1,143 +0,0 @@
-chip soc/intel/braswell
-
-	############################################################
-	# Set the parameters for MemoryInit
-	############################################################
-
-	register "PcdMrcInitTsegSize" = "8"	# SMM Region size in MiB
-
-	register "PcdMrcInitMmioSize" = "0x0800"
-	register "PcdMrcInitSpdAddr1" = "0xa0"
-	register "PcdMrcInitSpdAddr2" = "0xa2"
-	register "PcdIgdDvmt50PreAlloc" = "1"
-	register "PcdApertureSize" = "2"
-	register "PcdGttSize" = "1"
-	register "PcdDvfsEnable" = "1"
-	register "PcdCaMirrorEn" = "0"
-
-	############################################################
-	# Set the parameters for SiliconInit
-	############################################################
-
-	register "PcdSdcardMode" = "PCH_ACPI_MODE"
-	register "PcdEnableHsuart0" = "0"
-	register "PcdEnableHsuart1" = "1"
-	register "PcdEnableAzalia" = "1"
-	register "PcdEnableXhci" = "1"
-	register "PcdEnableLpe" = "1"
-	register "PcdEnableDma0" = "1"
-	register "PcdEnableDma1" = "1"
-	register "PcdEnableI2C0" = "1"
-	register "PcdEnableI2C1" = "1"
-	register "PcdEnableI2C2" = "0"
-	register "PcdEnableI2C3" = "0"
-	register "PcdEnableI2C4" = "0"
-	register "PcdEnableI2C5" = "1"
-	register "PcdEnableI2C6" = "0"
-	register "PunitPwrConfigDisable" = "0"	# Enable SVID
-	register "ChvSvidConfig" = "SVID_CONFIG1"
-	register "PcdEmmcMode" = "PCH_ACPI_MODE"
-	register "PcdUsb3ClkSsc" = "1"
-	register "PcdDispClkSsc" = "1"
-	register "PcdSataClkSsc" = "1"
-	register "PcdEnableSata" = "0"		# Disable SATA
-	register "Usb2Port0PerPortPeTxiSet" = "7"
-	register "Usb2Port0PerPortTxiSet" = "5"
-	register "Usb2Port0IUsbTxEmphasisEn" = "2"
-	register "Usb2Port0PerPortTxPeHalf" = "1"
-	register "Usb2Port1PerPortPeTxiSet" = "7"
-	register "Usb2Port1PerPortTxiSet" = "3"
-	register "Usb2Port1IUsbTxEmphasisEn" = "2"
-	register "Usb2Port1PerPortTxPeHalf" = "1"
-	register "Usb2Port2PerPortPeTxiSet" = "7"
-	register "Usb2Port2PerPortTxiSet" = "3"
-	register "Usb2Port2IUsbTxEmphasisEn" = "2"
-	register "Usb2Port2PerPortTxPeHalf" = "1"
-	register "Usb2Port3PerPortPeTxiSet" = "7"
-	register "Usb2Port3PerPortTxiSet" = "3"
-	register "Usb2Port3IUsbTxEmphasisEn" = "2"
-	register "Usb2Port3PerPortTxPeHalf" = "1"
-	register "Usb2Port4PerPortPeTxiSet" = "7"
-	register "Usb2Port4PerPortTxiSet" = "3"
-	register "Usb2Port4IUsbTxEmphasisEn" = "2"
-	register "Usb2Port4PerPortTxPeHalf" = "1"
-	register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
-	register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
-	register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
-	register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
-	register "PcdSataInterfaceSpeed" = "3"
-	register "PcdPchSsicEnable" = "1"
-	register "PcdRtcLock" = "0"	# Disable RTC access locking to NVRAM
-	register "PMIC_I2CBus" = "0"
-	register "ISPEnable" = "0"		# Disable IUNIT
-	register "ISPPciDevConfig" = "3"
-	register "PcdSdDetectChk" = "0" # Disable SD card detect
-
-	# LPE audio codec settings
-	register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
-	# Enable devices in ACPI mode
-	register "lpss_acpi_mode" = "1"
-	register "emmc_acpi_mode" = "1"
-	register "sd_acpi_mode" = "1"
-	register "lpe_acpi_mode" = "1"
-
-	# Disable SLP_X stretching after SUS power well fail.
-	register "disable_slp_x_stretch_sus_fail" = "1"
-
-	# Allow PCIe devices to wake system from suspend
-	register "pcie_wake_enable" = "1"
-
-	device cpu_cluster 0 on
-		device lapic 0 on end
-	end
-	device domain 0 on
-					# EDS Table 24-4, Figure 24-5
-		device pci 00.0 on end	# 8086 2280 - SoC transaction router
-		device pci 02.0 on end	# 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
-		device pci 03.0 off end	# 8086 22b8 - Camera and Image Processor
-		device pci 0b.0 on end	# 8086 22dc - ?
-		device pci 10.0 on end	# 8086 2294 - MMC Port
-		device pci 11.0 off end	# 8086 0F15 - SDIO Port
-		device pci 12.0 on end	# 8086 0F16 - SD Port
-		device pci 13.0 off end	# 8086 22a3 - Sata controller
-		device pci 14.0 on end	# 8086 22b5 - USB XHCI - Only 1 USB controller at a time
-		device pci 15.0 on end	# 8086 22a8 - LP Engine Audio
-		device pci 16.0 off end	# 8086 22b7 - USB device
-		device pci 18.0 on end	# 8086 22c0 - SIO - DMA
-		device pci 18.1 on end	# 8086 22c1 -   I2C Port 1
-		device pci 18.2 on end	# 8086 22c2 -   I2C Port 2
-		device pci 18.3 off end	# 8086 22c3 -   I2C Port 3
-		device pci 18.4 off end	# 8086 22c4 -   I2C Port 4
-		device pci 18.5 off end	# 8086 22c5 -   I2C Port 5
-		device pci 18.6 on end	# 8086 22c6 -   I2C Port 6
-		device pci 18.7 off end	# 8086 22c7 -   I2C Port 7
-		device pci 1a.0 off end	# 8086 0F18 - Trusted Execution Engine
-		device pci 1b.0 on end	# 8086 2284 - HD Audio
-		device pci 1c.0 on end	# 8086 22c8 - PCIe Root Port 1
-		device pci 1c.1 on end	# 8086 0000 - PCIe Root Port 2
-		device pci 1c.2 on end	# 8086 22cc - PCIe Root Port 3
-		device pci 1c.3 off end	# 8086 0000 - PCIe Root Port 4
-		device pci 1e.0 on end	# 8086 2286 - SIO - DMA
-		device pci 1e.1 off end	# 8086 0F08 -   PWM 1
-		device pci 1e.2 off end	# 8086 0F09 -   PWM 2
-		device pci 1e.3 on end	# 8086 228a -   HSUART 1
-		device pci 1e.4 off end	# 8086 228c -   HSUART 2
-		device pci 1e.5 on end	# 8086 228e -   SPI 1
-		device pci 1e.6 off end	# 8086 2290 -   SPI 2
-		device pci 1e.7 off end	# 8086 22ac -   SPI 3
-		device pci 1f.0 on	# 8086 229c - LPC bridge
-			chip drivers/pc80/tpm
-				# Rising edge interrupt
-				register "irq_polarity" = "2"
-				device pnp 0c31.0 on
-					irq 0x70 = 10
-				end
-			end
-			chip ec/google/chromeec
-				device pnp 0c09.0 on end
-			end
-		end # LPC Bridge
-		device pci 1f.3 off end	# 8086 0F12 - SMBus 0
-	end
-end