diff options
Diffstat (limited to 'src/mainboard/google/brya')
| -rw-r--r-- | src/mainboard/google/brya/variants/redrix/gpio.c | 3 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/redrix/overridetree.cb | 46 |
2 files changed, 17 insertions, 32 deletions
diff --git a/src/mainboard/google/brya/variants/redrix/gpio.c b/src/mainboard/google/brya/variants/redrix/gpio.c index c89d58c3fa..b82f4035cb 100644 --- a/src/mainboard/google/brya/variants/redrix/gpio.c +++ b/src/mainboard/google/brya/variants/redrix/gpio.c @@ -33,6 +33,9 @@ static const struct pad_config override_gpio_table[] = { /* D13 : ISH_UART0_RXD ==> NC */ PAD_NC_LOCK(GPP_D13, NONE, LOCK_CONFIG), + /* D16 : ISH_UART0_CTS# ==> EN_NVM_SENSOR_PWR */ + PAD_CFG_GPO(GPP_D16, 1, DEEP), + /* E3 : PROC_GP0 ==> NC */ PAD_NC(GPP_E3, NONE), /* E7 : PROC_GP1 ==> NC */ diff --git a/src/mainboard/google/brya/variants/redrix/overridetree.cb b/src/mainboard/google/brya/variants/redrix/overridetree.cb index 8ea87699c5..4d7d6a5d13 100644 --- a/src/mainboard/google/brya/variants/redrix/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix/overridetree.cb @@ -322,23 +322,20 @@ chip soc/intel/alderlake register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #EN_UCAM_LED_PWR - register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #EN_UCAM_PWR - register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset + register "gpio_panel.gpio[1].gpio_num" = "GPP_D3" #reset #_ON - register "on_seq.ops_cnt" = "5" + register "on_seq.ops_cnt" = "4" register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" - register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" #_OFF - register "off_seq.ops_cnt" = "4" + register "off_seq.ops_cnt" = "3" register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" - register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" - register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" - register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" device i2c 36 on probe CAMERA_UFC CAMERA_NONE probe CAMERA_UFC CAMERA_OV5675 @@ -364,23 +361,20 @@ chip soc/intel/alderlake register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #EN_UCAM_LED_PWR - register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #EN_UCAM_PWR - register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset + register "gpio_panel.gpio[1].gpio_num" = "GPP_D3" #reset #_ON - register "on_seq.ops_cnt" = "5" + register "on_seq.ops_cnt" = "4" register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" - register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" #_OFF - register "off_seq.ops_cnt" = "4" + register "off_seq.ops_cnt" = "3" register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" - register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" - register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" - register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" device i2c 20 on probe CAMERA_UFC CAMERA_HI556 end @@ -393,18 +387,6 @@ chip soc/intel/alderlake register "device_type" = "INTEL_ACPI_CAMERA_NVM" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" - #Controls - register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_UCAM_PWR - - #_ON - register "on_seq.ops_cnt" = "1" - register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" - - #_OFF - register "off_seq.ops_cnt" = "1" - register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - register "nvm_size" = "0x2000" register "nvm_pagesize" = "1" register "nvm_readonly" = "1" |