diff options
Diffstat (limited to 'src/mainboard/google/brya/variants')
| -rw-r--r-- | src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb | 32 |
1 files changed, 31 insertions, 1 deletions
diff --git a/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb index 70e7779545..efc2fcbc98 100644 --- a/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb @@ -123,7 +123,37 @@ chip soc/intel/alderlake }" device domain 0 on - device ref igpu on end + # The timing values can be derived from datasheet of display panel + # You can use EDID string to identify the type of display on the board + # use below command to get display info from EDID + # strings /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/edid + + # refer to display PRM document (Volume 2b: Command Reference: Registers) + # for more info on display control registers + # https://01.org/linuxgraphics/documentation/hardware-specification-prms + #+-----------------------------+---------------------------------------+-----+ + #| Intel docs | devicetree.cb | eDP | + #+-----------------------------+---------------------------------------+-----+ + #| Power up delay | `gpu_panel_power_up_delay` | T3 | + #+-----------------------------+---------------------------------------+-----+ + #| Power on to backlight on | `gpu_panel_power_backlight_on_delay` | T7 | + #+-----------------------------+---------------------------------------+-----+ + #| Power Down delay | `gpu_panel_power_down_delay` | T10 | + #+-----------------------------+---------------------------------------+-----+ + #| Backlight off to power down | `gpu_panel_power_backlight_off_delay` | T9 | + #+-----------------------------+---------------------------------------+-----+ + #| Power Cycle Delay | `gpu_panel_power_cycle_delay` | T12 | + #+-----------------------------+---------------------------------------+-----+ + device ref igpu on + register "panel_cfg" = "{ + .up_delay_ms = 200, + .down_delay_ms = 50, + .cycle_delay_ms = 500, + .backlight_on_delay_ms = 1, + .backlight_off_delay_ms = 200, + .backlight_pwm_hz = 200, + }" + end device ref dtt on end device ref tbt_pcie_rp0 on end device ref tbt_pcie_rp1 on end |