1 files changed, 0 insertions, 110 deletions
diff --git a/src/mainboard/google/auron/variants/buddy/devicetree.cb b/src/mainboard/google/auron/variants/buddy/devicetree.cb
deleted file mode 100644
index e12882f413..0000000000
--- a/src/mainboard/google/auron/variants/buddy/devicetree.cb
+++ /dev/null
@@ -1,110 +0,0 @@
-chip soc/intel/broadwell
-
-	# Enable eDP Hotplug with 6ms pulse
-	register "gpu_dp_d_hotplug" = "0x06"
-
-	# Disable DisplayPort C Hotplug
-	register "gpu_dp_c_hotplug" = "0x00"
-
-	# Enable HDMI Hotplug with 6ms pulse
-	register "gpu_dp_b_hotplug" = "0x06"
-
-	# Set backlight PWM value for eDP
-	register "gpu_pch_backlight_pwm_hz" = "200"
-
-	# Enable Panel and configure power delays
-	register "gpu_panel_port_select" = "1"			# eDP
-	register "gpu_panel_power_cycle_delay" = "5"		# 400ms
-	register "gpu_panel_power_up_delay" = "400"		# 40ms
-	register "gpu_panel_power_down_delay" = "150"		# 15ms
-	register "gpu_panel_power_backlight_on_delay" = "70"	# 7ms
-	register "gpu_panel_power_backlight_off_delay" = "2100"	# 210ms
-
-	register "pirqa_routing" = "0x8b"
-	register "pirqb_routing" = "0x8a"
-	register "pirqc_routing" = "0x8b"
-	register "pirqd_routing" = "0x8b"
-	register "pirqe_routing" = "0x80"
-	register "pirqf_routing" = "0x80"
-	register "pirqg_routing" = "0x80"
-	register "pirqh_routing" = "0x80"
-
-	# EC range is 0x800-0x9ff
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x00fc0901"
-
-	# EC_SMI is GPIO34
-	register "alt_gp_smi_en" = "0x0004"
-	register "gpe0_en_1" = "0x00000000"
-	# EC_SCI is GPIO36
-	register "gpe0_en_2" = "0x00000010"
-	register "gpe0_en_3" = "0x00000000"
-	register "gpe0_en_4" = "0x00000000"
-
-	register "sata_port_map" = "0x1"
-	register "sata_devslp_disable" = "0x1"
-
-	register "sio_acpi_mode" = "1"
-	register "sio_i2c0_voltage" = "1" # 1.8V
-	register "sio_i2c1_voltage" = "0" # 3.3V
-
-	# DTLE DATA / EDGE values
-	register "sata_port0_gen3_dtle" = "0x5"
-	register "sata_port1_gen3_dtle" = "0x5"
-
-	# Force enable ASPM for PCIe Port 5
-	register "pcie_port_force_aspm" = "0x10"
-
-	# Enable port coalescing
-	register "pcie_port_coalesce" = "1"
-
-	# Disable PCIe CLKOUT 1,5 and CLKOUT_XDP
-	register "icc_clock_disable" = "0x01220000"
-
-	register "s0ix_enable" = "0"
-
-	device cpu_cluster 0 on
-		device lapic 0 on end
-	end
-
-	device domain 0 on
-		device pci 00.0 on end # host bridge
-		device pci 02.0 on end # vga controller
-		device pci 03.0 on end # mini-hd audio
-		device pci 13.0 on end # Smart Sound Audio DSP
-		device pci 14.0 on end # USB3 XHCI
-		device pci 15.0 on end # Serial I/O DMA
-		device pci 15.1 on end # I2C0
-		device pci 15.2 on end # I2C1
-		device pci 15.3 off end # GSPI0
-		device pci 15.4 off end # GSPI1
-		device pci 15.5 off end # UART0
-		device pci 15.6 off end # UART1
-		device pci 16.0 on end # Management Engine Interface 1
-		device pci 16.1 off end # Management Engine Interface 2
-		device pci 16.2 off end # Management Engine IDE-R
-		device pci 16.3 off end # Management Engine KT
-		device pci 17.0 off end # SDIO
-		device pci 19.0 off end # GbE
-		device pci 1b.0 off end # High Definition Audio
-		device pci 1c.0 off end # PCIe Port #1
-		device pci 1c.1 off end # PCIe Port #2
-		device pci 1c.2 on end # PCIe Port #3 - LAN (becomes RP1)
-		device pci 1c.3 on end # PCIe Port #4 - WLAN (becomes RP2)
-		device pci 1c.4 on end # PCIe Port #5
-		device pci 1c.5 off end # PCIe Port #6
-		device pci 1d.0 on end # USB2 EHCI
-		device pci 1e.0 off end # PCI bridge
-		device pci 1f.0 on
-			chip drivers/pc80/tpm
-				device pnp 0c31.0 on end
-			end
-			chip ec/google/chromeec
-				device pnp 0c09.0 on end
-			end
-		end # LPC bridge
-		device pci 1f.2 on end # SATA Controller
-		device pci 1f.3 on end # SMBus
-		device pci 1f.6 on end # Thermal
-	end
-end