diff options
Diffstat (limited to 'src/mainboard/gizmosphere')
| -rw-r--r-- | src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c | 53 | ||||
| -rw-r--r-- | src/mainboard/gizmosphere/gizmo2/Kconfig | 1 | ||||
| -rw-r--r-- | src/mainboard/gizmosphere/gizmo2/OemCustomize.c | 35 | ||||
| -rw-r--r-- | src/mainboard/gizmosphere/gizmo2/mainboard.c | 6 | ||||
| -rw-r--r-- | src/mainboard/gizmosphere/gizmo2/romstage.c | 92 |
5 files changed, 49 insertions, 138 deletions
diff --git a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c index b639e9629f..5383d40104 100644 --- a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c +++ b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c @@ -16,6 +16,7 @@ #include "AGESA.h" #include "amdlib.h" #include <northbridge/amd/agesa/BiosCallOuts.h> +#include <northbridge/amd/agesa/state_machine.h> #include "Ids.h" #include "heapManager.h" #include "FchPlatform.h" @@ -25,8 +26,6 @@ #endif #include <stdlib.h> -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr); - const BIOS_CALLOUT_STRUCT BiosCallouts[] = { {AGESA_DO_RESET, agesa_Reset }, @@ -36,7 +35,6 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] = {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } }; const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); @@ -177,40 +175,19 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams) #endif /* CONFIG_HUDSON_IMC_FWM */ } -/** - * Fch Oem setting callback - * - * Configure platform specific Hudson device, - * such Azalia, SATA, IMC etc. - */ -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr) +void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset) { - AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; - - if (StdHeader->Func == AMD_INIT_RESET) { - FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); - //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ - FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams_reset->FchReset.Xhci1Enable = FALSE; - } else if (StdHeader->Func == AMD_INIT_ENV) { - FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); - - /* Azalia Controller OEM Codec Table Pointer */ - FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); - /* Azalia Controller Front Panel OEM Table Pointer */ - - /* Fan Control */ - oem_fan_control(FchParams_env); - - /* XHCI configuration */ - FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams_env->Usb.Xhci1Enable = FALSE; - - /* sata configuration */ - } - printk(BIOS_DEBUG, "Done\n"); - - return AGESA_SUCCESS; +} + +void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env) +{ + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); + + FchParams_env->Imc.ImcEnable = FALSE; + FchParams_env->Hwm.HwMonitorEnable = FALSE; + FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ + + /* Fan Control */ + oem_fan_control(FchParams_env); } diff --git a/src/mainboard/gizmosphere/gizmo2/Kconfig b/src/mainboard/gizmosphere/gizmo2/Kconfig index 0c0f1870e3..f5509f6ecc 100644 --- a/src/mainboard/gizmosphere/gizmo2/Kconfig +++ b/src/mainboard/gizmosphere/gizmo2/Kconfig @@ -18,7 +18,6 @@ if BOARD_GIZMOSPHERE_GIZMO2 config BOARD_SPECIFIC_OPTIONS # dummy def_bool y - select AGESA_LEGACY select CPU_AMD_AGESA_FAMILY16_KB select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB select SOUTHBRIDGE_AMD_AGESA_YANGTZE diff --git a/src/mainboard/gizmosphere/gizmo2/OemCustomize.c b/src/mainboard/gizmosphere/gizmo2/OemCustomize.c index 933b036a45..2f25a89cc7 100644 --- a/src/mainboard/gizmosphere/gizmo2/OemCustomize.c +++ b/src/mainboard/gizmosphere/gizmo2/OemCustomize.c @@ -20,7 +20,7 @@ #include <PlatformMemoryConfiguration.h> #include "Filecode.h" -#include <northbridge/amd/agesa/agesawrapper.h> +#include <northbridge/amd/agesa/state_machine.h> #define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE @@ -98,6 +98,13 @@ static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { .DdiLinkList = DdiList }; +void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset) +{ + FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface; + FchReset->Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchReset->Xhci1Enable = FALSE; +} + /*---------------------------------------------------------------------------------------*/ /** * OemCustomizeInitEarly @@ -114,7 +121,7 @@ static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { **/ /*---------------------------------------------------------------------------------------*/ -static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly) +void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly) { AGESA_STATUS Status; PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr; @@ -136,14 +143,6 @@ static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly) PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; LibAmdMemCopy (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader); InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr; - return AGESA_SUCCESS; -} - -static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) -{ - /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ - InitMid->GnbMidConfiguration.iGpuVgaMode = 0; - return AGESA_SUCCESS; } /*---------------------------------------------------------------------------------------- @@ -157,7 +156,7 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) * is populated, AGESA will base its settings on the data from the table. Otherwise, it will * use its default conservative settings. */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { +static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = { #define SEED_WL 0x0E WRITE_LEVELING_SEED( @@ -183,7 +182,13 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { PSO_END }; -const struct OEM_HOOK OemCustomize = { - .InitEarly = OemInitEarly, - .InitMid = OemInitMid, -}; +void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost) +{ + InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable; +} + +void board_BeforeInitMid(struct sysinfo *cb, AMD_MID_PARAMS *InitMid) +{ + /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + InitMid->GnbMidConfiguration.iGpuVgaMode = 0; +} diff --git a/src/mainboard/gizmosphere/gizmo2/mainboard.c b/src/mainboard/gizmosphere/gizmo2/mainboard.c index bc161de8ab..ad4f9c9aa4 100644 --- a/src/mainboard/gizmosphere/gizmo2/mainboard.c +++ b/src/mainboard/gizmosphere/gizmo2/mainboard.c @@ -28,7 +28,7 @@ #include <southbridge/amd/common/amd_pci_util.h> #include <northbridge/amd/agesa/family16kb/pci_devs.h> #include <northbridge/amd/agesa/BiosCallOuts.h> -#include <northbridge/amd/agesa/agesawrapper.h> +#include <northbridge/amd/agesa/state_machine.h> /*********************************************************** * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. @@ -119,10 +119,6 @@ static void pirq_setup(void) static void mainboard_enable(device_t dev) { printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - if (acpi_is_wakeup_s3()) - agesawrapper_fchs3earlyrestore(); - /* Initialize the PIRQ data structures for consumption */ pirq_setup(); } diff --git a/src/mainboard/gizmosphere/gizmo2/romstage.c b/src/mainboard/gizmosphere/gizmo2/romstage.c index d0e1938456..283bea10f6 100644 --- a/src/mainboard/gizmosphere/gizmo2/romstage.c +++ b/src/mainboard/gizmosphere/gizmo2/romstage.c @@ -13,34 +13,17 @@ * GNU General Public License for more details. */ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/acpi.h> #include <arch/io.h> -#include <arch/stages.h> -#include <device/pnp_def.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <commonlib/loglevel.h> -#include <cpu/amd/car.h> -#include <northbridge/amd/agesa/agesawrapper.h> -#include <northbridge/amd/agesa/agesa_helper.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/lapic.h> +#include <northbridge/amd/agesa/state_machine.h> #include <southbridge/amd/agesa/hudson/hudson.h> -#include <cpu/amd/agesa/s3_resume.h> -#include "cbmem.h" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +void board_BeforeAgesa(struct sysinfo *cb) { - u32 val; + /* For serial port option, plug-in card on LPC. */ + pci_devfn_t dev = PCI_DEV(0, 0x14, 3); + pci_write_config32(dev, 0x44, 0xff03ffd5); - /* Must come first to enable PCI MMCONF. */ - amd_initmmio(); + hudson_lpc_port80(); /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA @@ -49,68 +32,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ outb(0xD2, 0xcd6); outb(0x00, 0xcd7); +} - /* Set LPC decode enables. */ - pci_devfn_t dev = PCI_DEV(0, 0x14, 3); - pci_write_config32(dev, 0x44, 0xff03ffd5); - - hudson_lpc_port80(); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - - post_code(0x31); - console_init(); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); +#if 0 + /* LPC clock? Should happen before enable_serial. */ /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ int i; for(i = 0; i < 200000; i++) val = inb(0xcd6); +#endif - post_code(0x37); - agesawrapper_amdinitreset(); - post_code(0x38); - printk(BIOS_DEBUG, "Got past yangtze_early_setup\n"); - - post_code(0x39); - - agesawrapper_amdinitearly(); - int s3resume = acpi_is_wakeup_s3(); - if (!s3resume) { - post_code(0x40); - agesawrapper_amdinitpost(); - post_code(0x41); - agesawrapper_amdinitenv(); - /* TODO: Disable cache is not ok. */ - disable_cache_as_ram(); - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - - post_code(0x60); - agesawrapper_amdinitresume(); - - amd_initcpuio(); - agesawrapper_amds3laterestore(); - - post_code(0x61); - prepare_for_resume(); - } - +#if 0 + /* Was before copy_and_run. */ outb(0xEA, 0xCD6); outb(0x1, 0xcd7); - - post_code(0x50); - copy_and_run(); - - post_code(0x54); /* Should never see this post code. */ -} +#endif |