2 files changed, 14 insertions, 14 deletions
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
index 6e17d29d30..d58363adaf 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
+++ b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
@@ -23,7 +23,7 @@
 
 ##
 ## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
+## (coreboot plus bootloader) will live in the boot rom chip.
 ##
 if USE_FAILOVER_IMAGE
 	default ROM_SECTION_SIZE   = FAILOVER_SIZE
@@ -40,18 +40,18 @@ end
 
 ##
 ## Compute the start location and size size of
-## The linuxBIOS bootloader.
+## The coreboot bootloader.
 ##
 default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
 default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
 
 ##
-## Compute where this copy of linuxBIOS will start in the boot rom
+## Compute where this copy of coreboot will start in the boot rom
 ##
 default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
 
 ##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
+## Compute a range of ROM that can cached to speed up coreboot,
 ## execution speed.
 ##
 ## XIP_ROM_SIZE must be a power of 2.
@@ -113,7 +113,7 @@ end
 
 
 ##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
 ##
 if HAVE_FAILOVER_BOOT
     if USE_FAILOVER_IMAGE
@@ -141,7 +141,7 @@ end
 
 
 ##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
 ##
 if HAVE_FAILOVER_BOOT
     if USE_FAILOVER_IMAGE
@@ -190,7 +190,7 @@ if USE_DCACHE_RAM
 end
 
 ###
-### This is the early phase of linuxBIOS startup
+### This is the early phase of coreboot startup
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
index cde543e1ad..d91f2d1e80 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
+++ b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
@@ -64,7 +64,7 @@ uses MAINBOARD_VENDOR
 uses MAINBOARD
 uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
 uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
 uses _RAMBASE
 uses TTYS0_BAUD
 uses TTYS0_BASE
@@ -148,7 +148,7 @@ default HAVE_FALLBACK_BOOT=1
 default HAVE_FAILOVER_BOOT=1
 
 ##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
 ##
 default HAVE_HARD_RESET=1
 
@@ -173,7 +173,7 @@ default HAVE_ACPI_TABLES=0
 default HAVE_OPTION_TABLE=1
 
 ##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
+## Move the default coreboot cmos range off of AMD RTC registers
 ##
 default LB_CKS_RANGE_START=49
 default LB_CKS_RANGE_END=122
@@ -259,10 +259,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1039
 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1234
 
 ###
-### LinuxBIOS layout values
+### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
 default ROM_IMAGE_SIZE = 65536
 
 ##
@@ -281,7 +281,7 @@ default HEAP_SIZE=0x8000
 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
 
 ##
-## LinuxBIOS C code runs at this location in RAM
+## Coreboot C code runs at this location in RAM
 ##
 default _RAMBASE=0x00100000
 
@@ -333,7 +333,7 @@ default TTYS0_BASE=0x3f8
 default TTYS0_LCS=0x3
 
 ##
-### Select the linuxBIOS loglevel
+### Select the coreboot loglevel
 ##
 ## EMERG      1   system is unusable
 ## ALERT      2   action must be taken immediately