diff options
Diffstat (limited to 'src/mainboard/esd/atom15/devicetree.cb')
| -rw-r--r-- | src/mainboard/esd/atom15/devicetree.cb | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/src/mainboard/esd/atom15/devicetree.cb b/src/mainboard/esd/atom15/devicetree.cb new file mode 100644 index 0000000000..769a687fea --- /dev/null +++ b/src/mainboard/esd/atom15/devicetree.cb @@ -0,0 +1,93 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## Copyright (C) 2014 Intel Corporation +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip soc/intel/fsp_baytrail + + #### ACPI Register Settings #### + register "fadt_pm_profile" = "PM_UNSPECIFIED" + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" + + #### FSP register settings #### + register "PcdSataMode" = "SATA_MODE_AHCI" + register "PcdMrcInitSPDAddr1" = "SPD_ADDR_DEFAULT" + register "PcdMrcInitSPDAddr2" = "SPD_ADDR_DEFAULT" + register "PcdMrcInitMmioSize" = "MMIO_SIZE_DEFAULT" + register "PcdeMMCBootMode" = "EMMC_FOLLOWS_DEVICETREE" + register "PcdIgdDvmt50PreAlloc" = "IGD_MEMSIZE_DEFAULT" + register "PcdApertureSize" = "APERTURE_SIZE_DEFAULT" + register "PcdGttSize" = "GTT_SIZE_DEFAULT" + register "PcdLpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" + register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" + register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" + register "IgdRenderStandby" = "IGD_RENDER_STANDBY_ENABLE" + register "EnableMemoryDown" = "MEMORY_DOWN_ENABLE" + register "DRAMSpeed" = "DRAM_SPEED_1066MHZ" + register "DRAMType" = "DRAM_TYPE_DDR3L" + register "DIMM0Enable" = "DIMM0_ENABLE" + register "DIMM1Enable" = "DIMM1_DISABLE" + register "DIMMDWidth" = "DIMM_DWIDTH_X16" + register "DIMMDensity" = "DIMM_DENSITY_4G_BIT" + register "DIMMBusWidth" = "DIMM_BUS_WIDTH_64BIT" + register "DIMMSides" = "DIMM_SIDES_1RANK" + register "DIMMtCL" = "8" + register "DIMMtRPtRCD" = "8" + register "DIMMtWR" = "8" + register "DIMMtWTR" = "4" + register "DIMMtRRD" = "6" + register "DIMMtRTP" = "4" + register "DIMMtFAW" = "27" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # 8086 0F00 - SoC router - + device pci 02.0 off end # 8086 0F31 - GFX - + device pci 03.0 off end # 8086 0F38 - MIPI - + + device pci 10.0 off end # 8086 0F14 - EMMC Port - + device pci 11.0 off end # 8086 0F15 - SDIO Port - + device pci 12.0 on end # 8086 0F16 - SD Port MicroSD on SD3 + device pci 13.0 off end # 8086 0F23 - SATA AHCI - + device pci 14.0 off end # 8086 0F35 - USB XHCI - + device pci 15.0 off end # 8086 0F28 - LP Engine Audio - + device pci 17.0 off end # 8086 0F50 - MMC Port - + device pci 18.0 on end # 8086 0F40 - SIO - DMA - + device pci 18.1 on end # 8086 0F41 - I2C Port 1 (0) - + device pci 18.2 on end # 8086 0F42 - I2C Port 2 (1) - + device pci 18.3 on end # 8086 0F43 - I2C Port 3 (2) - + device pci 18.4 on end # 8086 0F44 - I2C Port 4 (3) - + device pci 18.5 on end # 8086 0F45 - I2C Port 5 (4) - + device pci 18.6 on end # 8086 0F46 - I2C Port 6 (5) EEPROM + device pci 18.7 off end # 8086 0F47 - I2C Port 7 (6) - + device pci 1a.0 off end # 8086 0F18 - TXE - + device pci 1b.0 off end # 8086 0F04 - HD Audio - + device pci 1c.0 on end # 8086 0F48 - PCIe Port 1 (0) - + device pci 1c.1 off end # 8086 0F4A - PCIe Port 2 (1) - + device pci 1c.2 on end # 8086 0F4C - PCIe Port 3 (2) ETHERNET + device pci 1c.3 on end # 8086 0F4E - PCIe Port 4 (3) CAN + device pci 1d.0 on end # 8086 0F34 - USB EHCI - Enabling EHCI - + device pci 1e.0 on end # 8086 0F06 - SIO - DMA - + device pci 1e.1 on end # 8086 0F08 - PWM 1 - + device pci 1e.2 on end # 8086 0F09 - PWM 2 - + device pci 1e.3 on end # 8086 0F0A - HSUART 1 Alternate uart + device pci 1e.4 off end # 8086 0F0C - HSUART 2 - + device pci 1e.5 off end # 8086 0F0E - SPI - + device pci 1f.0 on end # 8086 0F1C - LPC bridge No connector + device pci 1f.3 on end # 8086 0F12 - SMBus 0 SPC + end +end |