1 files changed, 0 insertions, 114 deletions
diff --git a/src/mainboard/embeddedplanet/ep405pc/init.c b/src/mainboard/embeddedplanet/ep405pc/init.c
deleted file mode 100644
index 6148d89c4a..0000000000
--- a/src/mainboard/embeddedplanet/ep405pc/init.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2003, Greg Watson <gwatson@lanl.gov>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/*
- * Do very early board initialization:
- *
- * - Configure External Bus (EBC)
- * - Setup Flash
- * - Setup NVRTC
- * - Setup Board Control and Status Registers (BCSR)
- * - Enable UART0 for debugging
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc.h>
-#include <ppc4xx.h>
-#include <arch/io.h>
-#include <timer.h>
-
-void
-board_init(void)
-{
-	/*
-	 * Configure Inerrupt Controller
-	 */
-        mtdcr(uicsr, 0xFFFFFFFF);      /* clear all ints */
-        mtdcr(uicer, 0x00000000);      /* disable all ints */
-        mtdcr(uiccr, 0x00000000);      /* set all to be non-critical */
-        mtdcr(uicpr, 0xFFFFFF80);      /* set int polarities */
-        mtdcr(uictr, 0x10000000);      /* set int trigger levels */
-        mtdcr(uicvcr, 0x00000001);     /* set vect base=0,INT0 highest pri */
-        mtdcr(uicsr, 0xFFFFFFFF);      /* clear all ints */
-
-	/*
-	 * Configure FLASH
-	 */
-	mtebc(pb0cr, 0xFC0DC000);
-	mtebc(pb0ap, 0x02000000);
-
-	/*
-	 * Configure NVTRC/BCSR
-	 */
-	mtebc(pb4cr, 0xF4058000);
-	mtebc(pb4ap, 0x04050000);
-	
-	/*
-	 * Board Control and Status Register (BCSR) setup
-	 */
-
-	/*
-	 * BCSR1 - PCI Control
-	 */
-	out_8((unsigned char *)0xF4000001, 0x80);
-
-	/*
-	 * BCSR2 - FLASH, NVRAM and POR Control
-	 */
-	out_8((unsigned char *)0xF4000002, 0x9C);
-
-	/*
-	 * BCSR3 - FENET and UART
-	 */
-	out_8((unsigned char *)0xF4000003, 0xf0);
-
-	/*
-	 * BCSR4 - PCI Status and Masking
-	 */
-	out_8((unsigned char *)0xF4000004, 0x00);
-
-	/*
-	 * BCSR5 - XIRQ Select
-	 */
-	out_8((unsigned char *)0xF4000005, 0x00);
-
-	/*
-	 * BCSR6 - XIRQ Routing
-	 */
-	out_8((unsigned char *)0xF4000006, 0x07);
-
-	/*
-	 * Cycle LEDs to show something is happening...
-	 */
-	out_8((unsigned char *)0xF4000009, 0x07);
-	udelay(100000);
-	out_8((unsigned char *)0xF4000009, 0x0B);
-	udelay(100000);
-	out_8((unsigned char *)0xF4000009, 0x0D);
-	udelay(100000);
-	out_8((unsigned char *)0xF4000009, 0x0E);
-}
-
-void
-board_init2(void)
-{
-}