summaryrefslogtreecommitdiff
path: root/src/mainboard/digitallogic
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/digitallogic')
-rw-r--r--src/mainboard/digitallogic/Kconfig2
-rw-r--r--src/mainboard/digitallogic/adl855pc/devicetree.cb4
-rw-r--r--src/mainboard/digitallogic/adl855pc/irq_tables.c2
-rw-r--r--src/mainboard/digitallogic/adl855pc/romstage.c8
-rw-r--r--src/mainboard/digitallogic/msm586seg/devicetree.cb2
-rw-r--r--src/mainboard/digitallogic/msm586seg/irq_tables.c2
-rw-r--r--src/mainboard/digitallogic/msm586seg/mainboard.c22
-rw-r--r--src/mainboard/digitallogic/msm586seg/romstage.c26
-rw-r--r--src/mainboard/digitallogic/msm800sev/devicetree.cb4
-rw-r--r--src/mainboard/digitallogic/msm800sev/romstage.c2
10 files changed, 37 insertions, 37 deletions
diff --git a/src/mainboard/digitallogic/Kconfig b/src/mainboard/digitallogic/Kconfig
index 7c8fb1164e..7e115fc402 100644
--- a/src/mainboard/digitallogic/Kconfig
+++ b/src/mainboard/digitallogic/Kconfig
@@ -1,7 +1,7 @@
choice
prompt "Mainboard model"
depends on VENDOR_DIGITAL_LOGIC
-
+
source "src/mainboard/digitallogic/adl855pc/Kconfig"
source "src/mainboard/digitallogic/msm586seg/Kconfig"
source "src/mainboard/digitallogic/msm800sev/Kconfig"
diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb
index 5365b3f538..6b52633382 100644
--- a/src/mainboard/digitallogic/adl855pc/devicetree.cb
+++ b/src/mainboard/digitallogic/adl855pc/devicetree.cb
@@ -1,5 +1,5 @@
chip northbridge/intel/i855
- device pci_domain 0 on
+ device pci_domain 0 on
device pci 0.0 on end
device pci 1.0 on end
chip southbridge/intel/i82801dx
@@ -51,7 +51,7 @@ chip northbridge/intel/i855
end
end
end
- device apic_cluster 0 on
+ device apic_cluster 0 on
chip cpu/intel/socket_mPGA479M
device apic 0 on end
end
diff --git a/src/mainboard/digitallogic/adl855pc/irq_tables.c b/src/mainboard/digitallogic/adl855pc/irq_tables.c
index f3978d5e81..8b4352d25a 100644
--- a/src/mainboard/digitallogic/adl855pc/irq_tables.c
+++ b/src/mainboard/digitallogic/adl855pc/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify!
+/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
diff --git a/src/mainboard/digitallogic/adl855pc/romstage.c b/src/mainboard/digitallogic/adl855pc/romstage.c
index 731e681253..a137a3fd6f 100644
--- a/src/mainboard/digitallogic/adl855pc/romstage.c
+++ b/src/mainboard/digitallogic/adl855pc/romstage.c
@@ -15,7 +15,7 @@
#include "southbridge/intel/i82801dx/i82801dx_early_smbus.c"
#include "northbridge/intel/i855/raminit.h"
#include "northbridge/intel/i855/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
@@ -45,7 +45,7 @@ void main(unsigned long bist)
init_timer();
#endif
}
-
+
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
@@ -66,7 +66,7 @@ void main(unsigned long bist)
sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
- }
+ }
#if 0
dump_pci_devices();
@@ -76,7 +76,7 @@ void main(unsigned long bist)
ram_check(0x00000000, msr.lo+(msr.hi<<32));
// Check 16MB of memory @ 0
ram_check(0x00000000, 0x01000000);
- // Check 16MB of memory @ 2GB
+ // Check 16MB of memory @ 2GB
ram_check(0x80000000, 0x81000000);
#endif
}
diff --git a/src/mainboard/digitallogic/msm586seg/devicetree.cb b/src/mainboard/digitallogic/msm586seg/devicetree.cb
index 05067ca632..1ccf39f5b8 100644
--- a/src/mainboard/digitallogic/msm586seg/devicetree.cb
+++ b/src/mainboard/digitallogic/msm586seg/devicetree.cb
@@ -1,5 +1,5 @@
chip cpu/amd/sc520
- device pci_domain 0 on
+ device pci_domain 0 on
device pci 0.0 on end
device pci 12.0 on end # enet
device pci 14.0 on end # 69000
diff --git a/src/mainboard/digitallogic/msm586seg/irq_tables.c b/src/mainboard/digitallogic/msm586seg/irq_tables.c
index 9b49747ead..22d5820a62 100644
--- a/src/mainboard/digitallogic/msm586seg/irq_tables.c
+++ b/src/mainboard/digitallogic/msm586seg/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify!
+/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
* Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
*
diff --git a/src/mainboard/digitallogic/msm586seg/mainboard.c b/src/mainboard/digitallogic/msm586seg/mainboard.c
index fefe553de3..2361059a7d 100644
--- a/src/mainboard/digitallogic/msm586seg/mainboard.c
+++ b/src/mainboard/digitallogic/msm586seg/mainboard.c
@@ -14,10 +14,10 @@ static void irqdump(void)
int i;
int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a,
0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c,
- 0xd20, 0xd21, 0xd22, 0xd28, 0xd29,
+ 0xd20, 0xd21, 0xd22, 0xd28, 0xd29,
0xd30, 0xd31, 0xd32, 0xd33,
- 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46,
- 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a,
+ 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46,
+ 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a,
-1};
mmcr = (void *) 0xfffef000;
@@ -37,7 +37,7 @@ static void enable_dev(struct device *dev)
//volatile struct mmcrpic *pic = MMCRPIC;
volatile struct mmcr *mmcr = MMCRDEFAULT;
- /* msm586seg has this register set to a weird value.
+ /* msm586seg has this register set to a weird value.
* follow the board, not the manual!
*/
@@ -47,7 +47,7 @@ static void enable_dev(struct device *dev)
/* from fuctory bios */
/* NOTE: the following interrupt settings made interrupts work
- * for hard drive, and serial, but not for ethernet
+ * for hard drive, and serial, but not for ethernet
*/
/* just do what they say and nobody gets hurt. */
mmcr->pic.pcicr = 0 ; // M_GINT_MODE | M_S1_MODE | M_S2_MODE;
@@ -78,7 +78,7 @@ static void enable_dev(struct device *dev)
printk(BIOS_ERR, "0xc22 0x%x\n", *(unsigned short *) 0xfffefc22);
/* The following block has NOT proven sufficient to get
- * the VGA hardware to talk to us
+ * the VGA hardware to talk to us
*/
/* let's set some mmcr stuff per the BIOS settings */
mmcr->dbctl.dbctl = 0x10;
@@ -100,20 +100,20 @@ static void enable_dev(struct device *dev)
*/
mmcr->sysmap.adddecctl = 0x10;
- /* VGA now talks to us, so this adddecctl was the trick.
- * still no interrupts from enet.
- * Let's try fixing the piodata stuff, as there may be
+ /* VGA now talks to us, so this adddecctl was the trick.
+ * still no interrupts from enet.
+ * Let's try fixing the piodata stuff, as there may be
* some wire there not documented.
*/
mmcr->pio.data31_16 = 0xffbf;
/* also, our sl?picmode needs to match fuctory bios */
mmcr->pic.sl1picmode = 0x80;
mmcr->pic.sl2picmode = 0x0;
- /* and, finally, they do set gp5imap and we don't.
+ /* and, finally, they do set gp5imap and we don't.
*/
mmcr->pic.gp5imap = 0xd;
/* remaining problem: almost certainly, the irq table is bogus
- * NO SHOCK as it came from fuctory bios.
+ * NO SHOCK as it came from fuctory bios.
* but let's try these 4 changes for now and see what shakes.
*/
/* still not interrupts. */
diff --git a/src/mainboard/digitallogic/msm586seg/romstage.c b/src/mainboard/digitallogic/msm586seg/romstage.c
index 2035993be8..ae964fea93 100644
--- a/src/mainboard/digitallogic/msm586seg/romstage.c
+++ b/src/mainboard/digitallogic/msm586seg/romstage.c
@@ -74,7 +74,7 @@ static inline void irqinit(void){
/* these values taken from the msm board itself.
* and they cause the board to not even come out of calibrating_delay_loop
* if you can believe it. Our problem right now is no IDE or serial interrupts
- * So we'll try to put interrupts in, one at a time. IDE first.
+ * So we'll try to put interrupts in, one at a time. IDE first.
*/
cp = (volatile unsigned char *) 0xfffefd00;
*cp = 0x11;
@@ -179,9 +179,9 @@ static void main(unsigned long bist)
print_err("HI THERE!\n");
// sizemem();
staticmem();
- print_err("c60 is "); print_err_hex16(*(unsigned short *)0xfffefc60);
+ print_err("c60 is "); print_err_hex16(*(unsigned short *)0xfffefc60);
print_err("\n");
-
+
// while(1)
print_err("STATIC MEM DONE\n");
outb(0xee, 0x80);
@@ -198,18 +198,18 @@ static void main(unsigned long bist)
"jnz 1b\n\t"
:
: "a" (0), "D" (0), "c" (1024*1024)
- );
-
-
+ );
+
+
#endif
-
+
#if 0
dump_pci_devices();
#endif
#if 0
dump_pci_device(PCI_DEV(0, 0, 0));
#endif
-
+
#if 0
print_err("RAM CHECK!\n");
// Check 16MB of memory @ 0
@@ -223,10 +223,10 @@ static void main(unsigned long bist)
#if 1
{
volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x60000;
- volatile unsigned char *dst = (unsigned char *) 0x4000;
+ volatile unsigned char *dst = (unsigned char *) 0x4000;
for(i = 0; i < 0x20000; i++) {
/*
- print_err("Set dst "); print_err_hex32((unsigned long) dst);
+ print_err("Set dst "); print_err_hex32((unsigned long) dst);
print_err(" to "); print_err_hex32(*src); print_err("\n");
*/
*dst = *src;
@@ -244,10 +244,10 @@ static void main(unsigned long bist)
"jmp *%%edi\n\t"
:
: "a" (0x4000)
- );
-
+ );
+
print_err("Oh dear, I'm afraid it didn't work...\n");
-
+
while(1);
#endif
}
diff --git a/src/mainboard/digitallogic/msm800sev/devicetree.cb b/src/mainboard/digitallogic/msm800sev/devicetree.cb
index 9636dee678..6890e83327 100644
--- a/src/mainboard/digitallogic/msm800sev/devicetree.cb
+++ b/src/mainboard/digitallogic/msm800sev/devicetree.cb
@@ -1,5 +1,5 @@
chip northbridge/amd/lx
- device pci_domain 0 on
+ device pci_domain 0 on
device pci 1.0 on end
device pci 1.1 on end
chip southbridge/amd/cs5536
@@ -57,7 +57,7 @@ chip northbridge/amd/lx
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
- end
+ end
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
diff --git a/src/mainboard/digitallogic/msm800sev/romstage.c b/src/mainboard/digitallogic/msm800sev/romstage.c
index 4598e89ad9..379f5517bc 100644
--- a/src/mainboard/digitallogic/msm800sev/romstage.c
+++ b/src/mainboard/digitallogic/msm800sev/romstage.c
@@ -93,7 +93,7 @@ void main(unsigned long bist)
print_err("POST 02\n");
__asm__("wbinvd\n");
print_err("Past wbinvd\n");
- /* we are finding the return does not work on this board. Explicitly call the label that is
+ /* we are finding the return does not work on this board. Explicitly call the label that is
* after the call to us. This is gross, but sometimes at this level it is the only way out
*/
void done_cache_as_ram_main(void);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 15:10:33 +0000