summaryrefslogtreecommitdiff
path: root/src/mainboard/broadcom
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/broadcom')
-rw-r--r--src/mainboard/broadcom/blast/Config.lb14
-rw-r--r--src/mainboard/broadcom/blast/Options.lb14
2 files changed, 14 insertions, 14 deletions
diff --git a/src/mainboard/broadcom/blast/Config.lb b/src/mainboard/broadcom/blast/Config.lb
index c9a22ca523..37681996fb 100644
--- a/src/mainboard/broadcom/blast/Config.lb
+++ b/src/mainboard/broadcom/blast/Config.lb
@@ -1,6 +1,6 @@
##
## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
+## (coreboot plus bootloader) will live in the boot rom chip.
##
if USE_FALLBACK_IMAGE
default ROM_SECTION_SIZE = FALLBACK_SIZE
@@ -12,18 +12,18 @@ end
##
## Compute the start location and size size of
-## The linuxBIOS bootloader.
+## The coreboot bootloader.
##
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
-## Compute where this copy of linuxBIOS will start in the boot rom
+## Compute where this copy of coreboot will start in the boot rom
##
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
+## Compute a range of ROM that can cached to speed up coreboot,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
@@ -72,7 +72,7 @@ if USE_DCACHE_RAM
end
##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
@@ -88,7 +88,7 @@ if USE_DCACHE_RAM
end
##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
##
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
@@ -112,7 +112,7 @@ if USE_DCACHE_RAM
end
###
-### This is the early phase of linuxBIOS startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
diff --git a/src/mainboard/broadcom/blast/Options.lb b/src/mainboard/broadcom/blast/Options.lb
index d02aa9796f..6142896092 100644
--- a/src/mainboard/broadcom/blast/Options.lb
+++ b/src/mainboard/broadcom/blast/Options.lb
@@ -36,7 +36,7 @@ uses MAINBOARD_VENDOR
uses MAINBOARD
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
uses _RAMBASE
uses TTYS0_BAUD
uses TTYS0_BASE
@@ -89,7 +89,7 @@ default FALLBACK_SIZE=0x40000
default HAVE_FALLBACK_BOOT=1
##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
##
default HAVE_HARD_RESET=1
@@ -111,7 +111,7 @@ default HAVE_MP_TABLE=1
default HAVE_OPTION_TABLE=1
##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
+## Move the default coreboot cmos range off of AMD RTC registers
##
default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
@@ -168,10 +168,10 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
###
-### LinuxBIOS layout values
+### coreboot layout values
###
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default ROM_IMAGE_SIZE = 65536
##
@@ -190,7 +190,7 @@ default HEAP_SIZE=0x4000
default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
##
-## LinuxBIOS C code runs at this location in RAM
+## Coreboot C code runs at this location in RAM
##
default _RAMBASE=0x00004000
@@ -239,7 +239,7 @@ default TTYS0_BASE=0x3f8
default TTYS0_LCS=0x3
##
-### Select the linuxBIOS loglevel
+### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately