diff options
Diffstat (limited to 'src/mainboard/biostar/am1ml/romstage.c')
-rw-r--r-- | src/mainboard/biostar/am1ml/romstage.c | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/src/mainboard/biostar/am1ml/romstage.c b/src/mainboard/biostar/am1ml/romstage.c new file mode 100644 index 0000000000..6cfe236747 --- /dev/null +++ b/src/mainboard/biostar/am1ml/romstage.c @@ -0,0 +1,230 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2015 Sergej Ivanov <getinaks@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include <cpu/amd/car.h> +#include <northbridge/amd/agesa/agesawrapper.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/lapic.h> +#include <southbridge/amd/agesa/hudson/hudson.h> +#include <cpu/amd/agesa/s3_resume.h> +#include "cbmem.h" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8728f/it8728f.h> + + +#define ITE_CONFIG_REG_CC 0x02 +#define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO) +#define ENVC_DEV PNP_DEV(0x2e, IT8728F_EC) + +#define MMIO_NON_POSTED_START 0xfed00000 +#define MMIO_NON_POSTED_END 0xfedfffff +#define SB_MMIO 0xFED80000 +#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x)) + + +static void it_sio_write(pnp_devfn_t dev, u8 reg, u8 value) +{ + pnp_set_logical_device(dev); + pnp_write_config(dev, reg, value); +} + +static void ite_enter_conf(pnp_devfn_t dev) +{ + u16 port = dev >> 8; + + outb(0x87, port); + outb(0x01, port); + outb(0x55, port); + outb((port == 0x4e) ? 0xaa : 0x55, port); +} + +static void ite_exit_conf(pnp_devfn_t dev) +{ + it_sio_write(dev, ITE_CONFIG_REG_CC, 0x02); +} + +static void ite_evc_conf(pnp_devfn_t dev) +{ + ite_enter_conf(dev); + it_sio_write(dev, 0xf1 , 0x40 ); + it_sio_write(dev, 0xf4 , 0x80 ); + it_sio_write(dev, 0xf5 , 0x00 ); + it_sio_write(dev, 0xf6 , 0xf0 ); + it_sio_write(dev, 0xf9 , 0x48 ); + it_sio_write(dev, 0xfa , 0x00 ); + it_sio_write(dev, 0xfb , 0x00 ); + ite_exit_conf(dev); +} + +static void ite_gpio_conf(pnp_devfn_t dev) +{ + ite_enter_conf (dev); + it_sio_write (dev, 0x25 , 0x80 ); + it_sio_write (dev, 0x26 , 0x07 ); + it_sio_write (dev, 0x28 , 0x81 ); + it_sio_write (dev, 0x2c , 0x06 ); + it_sio_write (dev, 0x72 , 0x00 ); + it_sio_write (dev, 0x73 , 0x00 ); + it_sio_write (dev, 0xb3 , 0x01 ); + it_sio_write (dev, 0xb8 , 0x00 ); + it_sio_write (dev, 0xc0 , 0x00 ); + it_sio_write (dev, 0xc3 , 0x00 ); + it_sio_write (dev, 0xc8 , 0x00 ); + it_sio_write (dev, 0xc9 , 0x07 ); + it_sio_write (dev, 0xcb , 0x01 ); + it_sio_write (dev, 0xf0 , 0x10 ); + it_sio_write (dev, 0xf4 , 0x27 ); + it_sio_write (dev, 0xf8 , 0x20 ); + it_sio_write (dev, 0xf9 , 0x01 ); + ite_exit_conf (dev); +} + + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val, t32; + u8 byte; + device_t dev; + u32 *addr32; + + /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for + * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA + * even though the register is not documented in the Kabini BKDG. + * Otherwise the serial output is bad code. + */ + outb(0xD2, 0xcd6); + outb(0x00, 0xcd7); + + amd_initmmio(); + /* Set LPC decode enables. */ + pci_devfn_t dev2 = PCI_DEV(0, 0x14, 3); + pci_write_config32(dev2, 0x44, 0xff03ffd5); + + hudson_lpc_port80(); + + /* Enable the AcpiMmio space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ + addr32 = (u32 *)0xfed80e28; + t32 = *addr32; + t32 &= 0xfff8ffff; + *addr32 = t32; + + /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ + addr32 = (u32 *)0xfed80e40; + t32 = *addr32; + t32 &= 0xffffbffb; + *addr32 = t32; + + if (!cpu_init_detectedx && boot_cpu()) { + /* enable SIO LPC decode */ + dev = PCI_DEV(0, 0x14, 3); + byte = pci_read_config8(dev, 0x48); + byte |= 3; /* 2e, 2f */ + pci_write_config8(dev, 0x48, byte); + + /* enable serial decode */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 6); /* 0x3f8 */ + pci_write_config8(dev, 0x44, byte); + post_code(0x30); + post_code(0x31); + + /* run ite */ + ite_kill_watchdog(GPIO_DEV); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + } + printk(BIOS_DEBUG, "Console inited!\n"); + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ + int i; + for(i = 0; i < 200000; i++) + val = inb(0xcd6); + + post_code(0x37); + agesawrapper_amdinitreset(); + post_code(0x38); + printk(BIOS_DEBUG, "Got past yangtze_early_setup\n"); + + post_code(0x39); + + agesawrapper_amdinitearly(); + int s3resume = acpi_is_wakeup_s3(); + if (!s3resume) { + post_code(0x40); + agesawrapper_amdinitpost(); + post_code(0x41); + agesawrapper_amdinitenv(); + /* TODO: Disable cache is not ok. */ + disable_cache_as_ram(); + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + agesawrapper_amdinitresume(); + + amd_initcpuio(); + agesawrapper_amds3laterestore(); + + post_code(0x61); + prepare_for_resume(); + } + + outb(0xEA, 0xCD6); + outb(0x1, 0xcd7); + + post_code(0x50); + /* This functions configure SIO as it been done under vendor bios */ + printk(BIOS_DEBUG, "ITE CONFIG ENVC\n"); + ite_evc_conf(ENVC_DEV); + printk(BIOS_DEBUG, "ITE CONFIG GPIO\n"); + ite_gpio_conf(GPIO_DEV); + printk(BIOS_DEBUG, "ITE CONFIG DONE\n"); + + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +} |