diff options
Diffstat (limited to 'src/mainboard/bap')
| -rw-r--r-- | src/mainboard/bap/ode_e20XX/devicetree.cb | 163 |
1 files changed, 81 insertions, 82 deletions
diff --git a/src/mainboard/bap/ode_e20XX/devicetree.cb b/src/mainboard/bap/ode_e20XX/devicetree.cb index c2e428d80a..893d32366b 100644 --- a/src/mainboard/bap/ode_e20XX/devicetree.cb +++ b/src/mainboard/bap/ode_e20XX/devicetree.cb @@ -21,96 +21,95 @@ chip northbridge/amd/agesa/family16kb/root_complex device domain 0 on subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + chip northbridge/amd/agesa/family16kb + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9835 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe Slot + device pci 2.2 on end # PCIe Q7 Realtek GBit LAN + device pci 2.3 on end # PCIe CB Realtek GBit LAN + device pci 2.4 on end # x2 PCIe Microsemi FPGA + end #chip northbridge/amd/agesa/family16kb - chip northbridge/amd/agesa/family16kb # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9835 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe Slot - device pci 2.2 on end # PCIe Q7 Realtek GBit LAN - device pci 2.3 on end # PCIe CB Realtek GBit LAN - device pci 2.4 on end # x2 PCIe Microsemi FPGA - end #chip northbridge/amd/agesa/family16kb - - chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on end # SM - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f81866d - register "hwm_amd_tsi_addr" = "0x98" # Set to AMD - register "hwm_amd_tsi_control" = "0x02" # Set to AMD - register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM - register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode - register "hwm_fan3_control" = "0x00" # Fan control 23kHz - register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz - register "hwm_fan2_bound1" = "0x3C" # 60°C - register "hwm_fan2_bound2" = "0x32" # 50°C - register "hwm_fan2_bound3" = "0x28" # 40°C - register "hwm_fan2_bound4" = "0x1E" # 30°C - register "hwm_fan2_seg1_speed" = "0xFF" # 100% - register "hwm_fan2_seg2_speed" = "0xD9" # 85% - register "hwm_fan2_seg3_speed" = "0xB2" # 70% - register "hwm_fan2_seg4_speed" = "0x99" # 60% - register "hwm_fan2_seg5_speed" = "0x80" # 50% - register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 on # Hardware Monitor - io 0x60 = 0x295 - irq 0x70 = 0 - end - device pnp 4e.5 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.6 off end # GPIO - device pnp 4e.7 on end # WDT - device pnp 4e.a off end # PME - device pnp 4e.10 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.11 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.12 on # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 4e.13 on # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 4e.14 off # COM5 - end - device pnp 4e.15 off # COM6 - end - end # f81866d - end #LPC - device pci 14.7 on end # SD - end #chip southbridge/amd/agesa/hudson + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on end # SM + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f81866d + register "hwm_amd_tsi_addr" = "0x98" # Set to AMD + register "hwm_amd_tsi_control" = "0x02" # Set to AMD + register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM + register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode + register "hwm_fan3_control" = "0x00" # Fan control 23kHz + register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz + register "hwm_fan2_bound1" = "0x3C" # 60°C + register "hwm_fan2_bound2" = "0x32" # 50°C + register "hwm_fan2_bound3" = "0x28" # 40°C + register "hwm_fan2_bound4" = "0x1E" # 30°C + register "hwm_fan2_seg1_speed" = "0xFF" # 100% + register "hwm_fan2_seg2_speed" = "0xD9" # 85% + register "hwm_fan2_seg3_speed" = "0xB2" # 70% + register "hwm_fan2_seg4_speed" = "0x99" # 60% + register "hwm_fan2_seg5_speed" = "0x80" # 50% + register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.3 off end # Parallel Port + device pnp 4e.4 on # Hardware Monitor + io 0x60 = 0x295 + irq 0x70 = 0 + end + device pnp 4e.5 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.6 off end # GPIO + device pnp 4e.7 on end # WDT + device pnp 4e.a off end # PME + device pnp 4e.10 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.11 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.12 on # COM3 + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 4e.13 on # COM4 + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 4e.14 off # COM5 + end + device pnp 4e.15 off # COM6 + end + end # f81866d + end #LPC + device pci 14.7 on end # SD + end #chip southbridge/amd/agesa/hudson + chip northbridge/amd/agesa/family16kb device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end device pci 18.5 on end + end - end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex end #domain end #northbridge/amd/agesa/family16kb/root_complex |