diff options
Diffstat (limited to 'src/mainboard/bap/ode_e21XX/BiosCallOuts.c')
| -rw-r--r-- | src/mainboard/bap/ode_e21XX/BiosCallOuts.c | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/src/mainboard/bap/ode_e21XX/BiosCallOuts.c b/src/mainboard/bap/ode_e21XX/BiosCallOuts.c deleted file mode 100644 index faf3b95f39..0000000000 --- a/src/mainboard/bap/ode_e21XX/BiosCallOuts.c +++ /dev/null @@ -1,313 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <AGESA.h> -#include <console/console.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <FchPlatform.h> -#include <spd_bin.h> - -#include "imc.h" -#include "hudson.h" - -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr); -static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_READ_SPD, board_ReadSpd_from_cbfs }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, - {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/** - * Realtek ALC272 CODEC Verb Table - */ -static const CODEC_ENTRY Alc272_VerbTbl[] = { - {0x11, 0x411111F0}, // - SPDIF_OUT2 - {0x12, 0x411111F0}, // - DMIC_1/2 - {0x13, 0x411111F0}, // - DMIC_3/4 - {0x14, 0x411111F0}, // Port D - LOUT1 - {0x15, 0x411111F0}, // Port A - LOUT2 - {0x16, 0x411111F0}, // - {0x17, 0x411111F0}, // Port H - MONO - {0x18, 0x01a19840}, // Port B - MIC1 - {0x19, 0x411111F0}, // Port F - MIC2 - {0x1a, 0x01813030}, // Port C - LINE1 - {0x1b, 0x411111F0}, // Port E - LINE2 - {0x1d, 0x40251E05}, // - PCBEEP - {0x1e, 0x01441120}, // - SPDIF_OUT1 - {0x21, 0x01214010}, // Port I - HPOUT - {0xff, 0xffffffff} -}; - -static const CODEC_TBL_LIST CodecTableList[] = -{ - {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]}, - {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} -}; - -#define FAN_INPUT_INTERNAL_DIODE 0 -#define FAN_INPUT_TEMP0 1 -#define FAN_INPUT_TEMP1 2 -#define FAN_INPUT_TEMP2 3 -#define FAN_INPUT_TEMP3 4 -#define FAN_INPUT_TEMP0_FILTER 5 -#define FAN_INPUT_ZERO 6 -#define FAN_INPUT_DISABLED 7 - -#define FAN_AUTOMODE (1 << 0) -#define FAN_LINEARMODE (1 << 1) -#define FAN_STEPMODE ~(1 << 1) -#define FAN_POLARITY_HIGH (1 << 2) -#define FAN_POLARITY_LOW ~(1 << 2) - -/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ -#define FREQ_28KHZ 0x0 -#define FREQ_25KHZ 0x1 -#define FREQ_23KHZ 0x2 -#define FREQ_21KHZ 0x3 -#define FREQ_29KHZ 0x4 -#define FREQ_18KHZ 0x5 -#define FREQ_100HZ 0xF7 -#define FREQ_87HZ 0xF8 -#define FREQ_58HZ 0xF9 -#define FREQ_44HZ 0xFA -#define FREQ_35HZ 0xFB -#define FREQ_29HZ 0xFC -#define FREQ_22HZ 0xFD -#define FREQ_14HZ 0xFE -#define FREQ_11HZ 0xFF - -/* - * Hardware Monitor Fan Control - * Hardware limitation: - * HWM will fail to read the input temperature via I2C if other - * software switches the I2C address. AMD recommends using IMC - * to control fans, instead of HWM. - */ -static void oem_fan_control(FCH_DATA_BLOCK *FchParams) -{ - FCH_HWM_FAN_CTR oem_factl[5] = { - /*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ - /* DB-FT3 FanOUT0 Fan header J32 */ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - /* DB-FT3 FanOUT1 Fan header J31*/ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - }; - LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); - - /* Enable IMC fan control. the recommended way */ - if (CONFIG(HUDSON_IMC_FWM)) { - /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */ - - FchParams->Imc.ImcEnable = TRUE; - FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ - FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */ - - LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); - - /* Thermal Zone Parameter */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; - - /* IMC Fan Policy temperature thresholds */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; - - /* IMC Fan Policy PWM Settings */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; - - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; - - /* IMC Function */ - FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8; - - /* NOTE: - * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage, - * AGESA put EcDefaultMessage as global data in ROM, so we can't override it. - * so we remove it from AGESA code. Please See FchInitLateHwm. - */ - } else { - /* HWM fan control, using the alternative method */ - FchParams->Imc.ImcEnable = FALSE; - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */ - } -} - -/** - * Fch Oem setting callback - * - * Configure platform specific Hudson device, - * such Azalia, SATA, IMC etc. - */ -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr) -{ - AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr; - if (StdHeader->Func == AMD_INIT_RESET) { - FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); - //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ - FchParams->LegacyFree = CONFIG(HUDSON_LEGACY_FREE); - FchParams->FchReset.SataEnable = hudson_sata_enable(); - FchParams->FchReset.IdeEnable = hudson_ide_enable(); - FchParams->FchReset.Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE); - FchParams->FchReset.Xhci1Enable = FALSE; - } else if (StdHeader->Func == AMD_INIT_ENV) { - FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); - - /* Azalia Controller OEM Codec Table Pointer */ - FchParams->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); - /* Azalia Controller Front Panel OEM Table Pointer */ - - /* Fan Control */ - oem_fan_control(FchParams); - - /* XHCI configuration */ - FchParams->Usb.Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE); - FchParams->Usb.Xhci1Enable = FALSE; - - /* sata configuration */ - FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE; - switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { - case SataRaid: - case SataAhci: - case SataAhci7804: - case SataLegacyIde: - FchParams->Sata.SataIdeMode = FALSE; - break; - case SataIde2Ahci: - case SataIde2Ahci7804: - default: /* SataNativeIde */ - FchParams->Sata.SataIdeMode = TRUE; - break; - } - } - printk(BIOS_DEBUG, "Done\n"); - - return AGESA_SUCCESS; -} - -static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr) -{ - AGESA_READ_SPD_PARAMS *info = ConfigPtr; - u8 index; - - if (!ENV_ROMSTAGE) - return AGESA_UNSUPPORTED; - - if (CONFIG(BAP_E21_DDR3_1066)) - index = 1; - else if (CONFIG(BAP_E21_DDR3_1333)) - index = 2; - else /* CONFIG_BAP_E21_DDR3_800 */ - index = 0; - - if (info->MemChannelId > 0) - return AGESA_UNSUPPORTED; - if (info->SocketId != 0) - return AGESA_UNSUPPORTED; - if (info->DimmId != 0) - return AGESA_UNSUPPORTED; - - /* Read index 0, first SPD_SIZE bytes of spd.bin file. */ - if (read_ddr3_spd_from_cbfs((u8 *)info->Buffer, index) < 0) - die("No SPD data\n"); - - return AGESA_SUCCESS; -} |