diff options
Diffstat (limited to 'src/mainboard/asus')
| -rw-r--r-- | src/mainboard/asus/a8n_e/Config.lb | 371 |
1 files changed, 183 insertions, 188 deletions
diff --git a/src/mainboard/asus/a8n_e/Config.lb b/src/mainboard/asus/a8n_e/Config.lb index 15cf8fa876..f19105e9d1 100644 --- a/src/mainboard/asus/a8n_e/Config.lb +++ b/src/mainboard/asus/a8n_e/Config.lb @@ -1,7 +1,7 @@ ## ## This file is part of the LinuxBIOS project. ## -## Copyright (C) 2007 AMD +## Copyright (C) 2007 AMD ## (Written by Yinghai Lu <yinghailu@amd.com> for AMD) ## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> ## (Thanks to LSRA University of Mannheim for their support) @@ -26,47 +26,46 @@ ## (linuxBIOS plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE - default ROM_SECTION_SIZE = FAILOVER_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE ) + default ROM_SECTION_SIZE = FAILOVER_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FAILOVER_SIZE) else - if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) - else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) - default ROM_SECTION_OFFSET = 0 - end + if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE) + else + default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE) + default ROM_SECTION_OFFSET = 0 + end end ## -## Compute the start location and size size of -## The linuxBIOS bootloader. +## Compute the start location and size size of the LinuxBIOS bootloader. ## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = ( 0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1 ) +default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of LinuxBIOS will start in the boot ROM. ## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can be cached to speed up LinuxBIOS ## execution speed. ## -## XIP_ROM_SIZE must be a power of 2. (here 64 Kbyte) +## XIP_ROM_SIZE must be a power of 2 (here 64 Kbyte) ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE ## -default XIP_ROM_SIZE = ( 64 * 1024 ) +default XIP_ROM_SIZE = (64 * 1024) if USE_FAILOVER_IMAGE - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE ) + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) else - if USE_FALLBACK_IMAGE - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE ) - else - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE ) - end + if USE_FALLBACK_IMAGE + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) + else + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) + end end arch i386 end @@ -107,51 +106,48 @@ if USE_DCACHE_RAM end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit LinuxBIOS entry code. ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end end mainboardinit cpu/x86/32bit/entry32.inc if USE_DCACHE_RAM - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + ldscript /cpu/amd/car/cache_as_ram.lds + end end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (this is where LinuxBIOS is entered). ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end end if USE_DCACHE_RAM @@ -161,7 +157,7 @@ else end ## -## Include an id string (For safe flashing) +## Include an ID string (for safe flashing). ## mainboardinit southbridge/nvidia/ck804/id.inc ldscript /southbridge/nvidia/ck804/id.lds @@ -190,22 +186,22 @@ end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of LinuxBIOS startup. ### Things are delicate and we test to see if we should ### failover to another image. ### if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover_failover.lds - end - end + if USE_FAILOVER_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover_failover.lds + end + end else - if USE_FALLBACK_IMAGE - if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds - end - end + if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + end + end end ### @@ -230,124 +226,123 @@ if CONFIG_CHIP_NAME config chip.h end -chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_939 - device apic 0 on end - end - end - - device pci_domain 0 on - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/ck804 - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x03f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x03f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x02f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel Port - io 0x60 = 0x0378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Environment Controller - io 0x60 = 0x0290 - io 0x62 = 0x0000 - irq 0x70 = 0x00 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x0060 - io 0x62 = 0x0064 - irq 0x70 = 0x01 - irq 0x71 = 0x02 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 0x0c - irq 0x71 = 0x02 - end - device pnp 2e.7 on # GPIO config - # Set GPIO 1 & 2 - io 0x25 = 0x0000 - # Set GPIO 3 & 4 - io 0x27 = 0x2540 - # GPIO Polarity for Set 3 - io 0xb2 = 0x2100 - # GPIO Pin Internal Pull up for Set 3 - io 0xba = 0x0100 - # Simple I/O register config - io 0xc0 = 0x0000 - io 0xc2 = 0x2540 - io 0xc8 = 0x0000 - io 0xca = 0x0500 - end - device pnp 2e.8 off end # Midi port - device pnp 2e.9 off end # Game port - device pnp 2e.a off end # IR - end - end - device pci 1.1 on # SM 0 - # chip drivers/generic/generic #dimm 0-0-0 - # device i2c 50 on end - # end - # chip drivers/generic/generic #dimm 0-0-1 - # device i2c 51 on end - # end - # chip drivers/generic/generic #dimm 0-1-0 - # device i2c 52 on end - # end - # chip drivers/generic/generic #dimm 0-1-1 - # device i2c 53 on end - # end - # chip drivers/generic/generic #dimm 1-0-0 - # device i2c 54 on end - # end - # chip drivers/generic/generic #dimm 1-0-1 - # device i2c 55 on end - # end - # chip drivers/generic/generic #dimm 1-1-0 - # device i2c 56 on end - # end - # chip drivers/generic/generic #dimm 1-1-1 - # device i2c 57 on end - # end - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 on end # PCI E 3 - device pci c.0 on end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" -# register "mac_eeprom_smbus" = "3" -# register "mac_eeprom_addr" = "0x51" - end +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_939 # Socket 939 CPU + device apic 0 on end # APIC + end + end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # mc0 - end # pci_domain -end # root_complex + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x0000 + irq 0x70 = 0x00 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x71 = 2 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + irq 0x71 = 2 + end + device pnp 2e.7 on # GPIO config + # Set GPIO 1 & 2 + io 0x25 = 0x0000 + # Set GPIO 3 & 4 + io 0x27 = 0x2540 + # GPIO Polarity for Set 3 + io 0xb2 = 0x2100 + # GPIO Pin Internal Pull up for Set 3 + io 0xba = 0x0100 + # Simple I/O register config + io 0xc0 = 0x0000 + io 0xc2 = 0x2540 + io 0xc8 = 0x0000 + io 0xca = 0x0500 + end + device pnp 2e.8 off end # Midi port + device pnp 2e.9 off end # Game port + device pnp 2e.a off end # IR + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic #dimm 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic #dimm 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic #dimm 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic #dimm 0-1-1 + # device i2c 53 on end + # end + # chip drivers/generic/generic #dimm 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic #dimm 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic #dimm 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic #dimm 1-1-1 + # device i2c 57 on end + # end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # Onboard audio (ACI) + device pci 4.1 off end # Onboard modem (MCI) + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 on end # PCI E 3 + device pci c.0 on end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # register "mac_eeprom_smbus" = "3" + # register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end |