diff options
Diffstat (limited to 'src/mainboard/asus/p8z77-m_pro/devicetree.cb')
| -rw-r--r-- | src/mainboard/asus/p8z77-m_pro/devicetree.cb | 109 |
1 files changed, 109 insertions, 0 deletions
diff --git a/src/mainboard/asus/p8z77-m_pro/devicetree.cb b/src/mainboard/asus/p8z77-m_pro/devicetree.cb new file mode 100644 index 0000000000..4f5e5bf9bb --- /dev/null +++ b/src/mainboard/asus/p8z77-m_pro/devicetree.cb @@ -0,0 +1,109 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip northbridge/intel/sandybridge + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.ndid" = "3" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on end + device lapic 0xacac off end + end + end + device domain 0x0 on + subsystemid 0x1043 0x84ca inherit + device pci 00.0 on end # Host bridge + device pci 01.0 on end # PCIe Bridge for discrete graphics + device pci 02.0 on end # Internal graphics VGA controller + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "gen1_dec" = "0x000c0291" + register "gen4_dec" = "0x0000ff29" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" # 0x3=SATAIII + register "sata_port_map" = "0x3f" # Enable the six SATA ports + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x00000c03" + register "xhci_switchable_ports" = "0x0000000f" # the 4 ports + device pci 14.0 on end # USB 3.0 Controller + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI 2 + device pci 1b.0 on end # High Definition Audio controller + device pci 1c.0 on end # PCIe Root Port 1 PCIEX_16_3 + device pci 1c.1 on end # PCIe Root Port 6 RTL8111F + device pci 1c.2 off end # PCIe Port 3 unused + device pci 1c.3 off end # PCIe Port 4 unused + device pci 1c.4 off end # PCIe Port 5 unused + device pci 1c.5 on end # PCIe Root Port 7 ASM1042 USB3 + device pci 1c.6 on end # PCIe Root Port 8 ASM1061 eSATA + device pci 1c.7 off end # PCIe Port 8 unused + device pci 1d.0 on end # USB2 EHCI 1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + chip superio/nuvoton/nct6779d + device pnp 2e.1 off end # Parallel + device pnp 2e.2 off end # UART A + device pnp 2e.3 on # UART B, IR + io 0x60 = 0x2f8 # COM2 address + end + device pnp 2e.5 on # PS2 KBC + io 0x60 = 0x0060 # KBC1 base + io 0x62 = 0x0064 # KBC2 base + irq 0x70 = 1 # Keyboard IRQ + irq 0x72 = 12 # Mouse IRQ + + # KBC 12Mhz/A20 speed/sw KBRST + drq 0xf0 = 0x82 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 on end # GPIOs 6-8 + device pnp 2e.8 off end # WDT1 GPIO 0-1 + device pnp 2e.9 off end # GPIO 1-8 + device pnp 2e.a on # ACPI + drq 0xe4 = 0x10 # Enable 3VSBS to power RAM on S3 + drq 0xe7 = 0x10 # 0.5s S3 delay for compatibility + end + device pnp 2e.b off end # HWM, LED + device pnp 2e.d off end # WDT1 + device pnp 2e.e off end # CIR wake-up + device pnp 2e.f on # GPIO PP/OD + drq 0xe6 = 0x7f # GP7 PP + end + device pnp 2e.14 on end # Port 80 UART + device pnp 2e.16 off end # Deep sleep + end + chip drivers/pc80/tpm + device pnp 4e.0 on end # TPM module + end + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end |