1 files changed, 12 insertions, 75 deletions

diff --git a/src/mainboard/asus/a8n_e/romstage.c b/src/mainboard/asus/a8n_e/romstage.c
index ae70c847f3..1c6d6488a2 100644
--- a/src/mainboard/asus/a8n_e/romstage.c
+++ b/src/mainboard/asus/a8n_e/romstage.c
@@ -98,9 +98,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #endif	/* CONFIG_USE_FAILOVER_IMAGE */
 
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) \
-	|| ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
-
 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
@@ -121,79 +118,8 @@ static void sio_setup(void)
 	pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword);
 }
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	unsigned last_boot_normal_x = last_boot_normal();
-
-	/* Is this a CPU only reset? Or is this a secondary CPU? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal_x) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the ck804 */
-	ck804_enable_rom();
-
-	/* Is this a deliberate reset by the BIOS? */
-	if (bios_reset_detected() && last_boot_normal_x) {
-		goto normal_image;
-	}
-
-	/* This is the primary CPU. How should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-
-normal_image:
-	__asm__ volatile ("jmp __normal_image"
-		:					/* outputs */
-		:"a" (bist), "b"(cpu_init_detectedx)	/* inputs */
-		);
-
-fallback_image:
-
-#if CONFIG_HAVE_FAILOVER_BOOT == 1
-	__asm__ volatile ("jmp __fallback_image"
-		:					/* outputs */
-		:"a" (bist), "b"(cpu_init_detectedx)	/* inputs */
-		)
-#endif
-	;
-}
-
-#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) ... */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-#if CONFIG_HAVE_FAILOVER_BOOT == 1
-#if CONFIG_USE_FAILOVER_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#else
-	real_main(bist, cpu_init_detectedx);
-#endif
-#else
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-#endif
-}
-
 #if CONFIG_USE_FAILOVER_IMAGE == 0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
 	static const uint16_t spd_addr[] = {
 		(0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
@@ -208,6 +134,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	unsigned nodes, bsp_apicid = 0;
 	struct mem_controller ctrl[8];
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		enumerate_ht_chain();
+
+		sio_setup();
+
+		/* Setup the ck804 */
+		ck804_enable_rom();
+	}
+
 	if (bist == 0)
 		bsp_apicid = init_cpus(cpu_init_detectedx);