diff options
Diffstat (limited to 'src/mainboard/asrock/939a785gmh/devicetree.cb')
-rw-r--r-- | src/mainboard/asrock/939a785gmh/devicetree.cb | 131 |
1 files changed, 0 insertions, 131 deletions
diff --git a/src/mainboard/asrock/939a785gmh/devicetree.cb b/src/mainboard/asrock/939a785gmh/devicetree.cb deleted file mode 100644 index 8b40b9f6d4..0000000000 --- a/src/mainboard/asrock/939a785gmh/devicetree.cb +++ /dev/null @@ -1,131 +0,0 @@ -#Define gppsb_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define gpp_configuration -> device 9 1x and device a 1x is 3 and device 9 2x is 2 -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot (means if GFX slot are two 2 8x slots) -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_939 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3060 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge 16x slot - device pci 3.0 off end # used in dual slot config - device pci 4.0 off end # GPPSB - device pci 5.0 off end # GPPSB - device pci 6.0 off end # GPPSB - device pci 7.0 off end # GPPSB - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # GPP for x1 slot - device pci a.0 on end # GPP for internal network adapter - register "gppsb_configuration" = "4" # Configuration ? - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x60c" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - - chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - #device pnp 2e.6 off # SPI - #end - device pnp 2e.307 off # GPIO6 - end - device pnp 2e.8 on # WDTO#, PLED - end - device pnp 2e.009 on # GPIO2 - end - device pnp 2e.109 on # GPIO3 - end - device pnp 2e.209 on # GPIO4 - end - device pnp 2e.309 off # GPIO5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # HWM - io 0x60 = 0x290 - end - device pnp 2e.c off # PECI, SST - end - end #superio/winbond/w8362 - - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex |