diff options
Diffstat (limited to 'src/mainboard/artecgroup/dbe61/Config.lb')
| -rw-r--r-- | src/mainboard/artecgroup/dbe61/Config.lb | 128 |
1 files changed, 48 insertions, 80 deletions
diff --git a/src/mainboard/artecgroup/dbe61/Config.lb b/src/mainboard/artecgroup/dbe61/Config.lb index 97975e7c36..40f157f6e9 100644 --- a/src/mainboard/artecgroup/dbe61/Config.lb +++ b/src/mainboard/artecgroup/dbe61/Config.lb @@ -47,27 +47,17 @@ driver mainboard.o if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" +if USE_DCACHE_RAM + #compile cache_as_ram.c to auto.inc + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end ## ## Build our 16 bit and 32 bit linuxBIOS entry code @@ -104,7 +94,7 @@ ldscript /arch/i386/lib/id.lds ### if USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +# mainboardinit ./failover.inc end ### @@ -115,7 +105,11 @@ end ## Setup RAM ## mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit ./auto.inc + +if USE_DCACHE_RAM + mainboardinit cpu/amd/model_lx/cache_as_ram.inc + mainboardinit ./cache_as_ram_auto.inc +end ## ## Include the secondary Configuration files @@ -124,70 +118,44 @@ dir /pc80 config chip.h chip northbridge/amd/lx - register "irqmap" = "0xcba5" + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + register "lpc_serirq_enable" = "0x00001002" + register "lpc_serirq_polarity" = "0x0000EFFD" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x2F8" + register "com1_irq" = "3" + register "com2_enable" = "1" + register "com2_address" = "0x3F8" + register "com2_irq" = "4" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci b.0 on end # Slot 3 + device pci c.0 on end # Slot 4 + device pci d.0 on end # Slot 1 + device pci e.0 on end # Slot 2 + device pci f.0 on end # ISA Bridge + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. device apic_cluster 0 on chip cpu/amd/model_lx device apic 0 on end end end - device pci_domain 0 on - - device pci 1.0 on end # Host Bridge - -# chip drivers/pci/realmode -# device pci 1.1 on end # VGA -# register "rom_address" = "0xfffc0000" # at the beginning of 256k -# end - - device pci 1.2 off end # AES - chip southbridge/amd/cs5536_lx - register "enable_ide_nand_flash" = "0" - - register "isa_irq" = "0" - #register "flash_irq" = "14" - - ## IDE IRQ - register "enable_ide_irq" = "0" - - register "audio_irq" = "5" - register "usb_irq" = "7" - - register "uart0_irq" = "0" - register "uart1_irq" = "4" - - ## PCI INTA ... INTD and their GPIO pins - ## int==0: disable - register "pci_int[0]" = "0" - register "pci_int[1]" = "10" - register "pci_int[2]" = "0" - register "pci_int[3]" = "0" - register "pci_int_pin[0]" = "0" - register "pci_int_pin[1]" = "7" - register "pci_int_pin[2]" = "0" - register "pci_int_pin[3]" = "0" - - - # Keyboard Emulation Logic IRQs - # Enable keyboard IRQ2 - register "enable_kel_keyb_irq" = "0" - # Enable mouse IRQ12 - register "enable_kel_mouse_irq" = "0" - # Configure KEL Emulation IRQ, 0 to disable - register "kel_emul_irq" = "0" - - device pci f.0 on end # ISA Bridge - device pci f.1 on end # Flash controller - device pci f.2 off end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - device pci f.6 off end # UDC controller - device pci f.7 off end # OTG controller - end -# chip drivers/pci/rtl8139 -## device pci d.0 on end # Realtek LAN -# register "nic_irq" = "10" -# end - end + end |