diff options
Diffstat (limited to 'src/mainboard/arima')
| -rw-r--r-- | src/mainboard/arima/hdama/Options.lb | 82 | ||||
| -rw-r--r-- | src/mainboard/arima/hdama/chip.h | 2 | ||||
| -rw-r--r-- | src/mainboard/arima/hdama/mainboard.c | 8 |
3 files changed, 83 insertions, 9 deletions
diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb index 1406a48b86..5bb0bc3485 100644 --- a/src/mainboard/arima/hdama/Options.lb +++ b/src/mainboard/arima/hdama/Options.lb @@ -34,16 +34,32 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses LINUXBIOS_EXTRA_VERSION uses _RAMBASE +uses CC +uses HOSTCC +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=524288 - ### ### Build options ### ## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default ROM_SIZE=524288 + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +default FALLBACK_SIZE=131072 + +## ## Build code for the fallback boot ## default HAVE_FALLBACK_BOOT=1 @@ -123,6 +139,10 @@ default HEAP_SIZE=0x4000 ## Only use the option table in a normal image ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE + +## +## LinuxBIOS C code runs at this location in RAM +## default _RAMBASE=0x00004000 ## @@ -130,5 +150,61 @@ default _RAMBASE=0x00004000 ## default CONFIG_ROM_STREAM = 1 +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="gcc" +default HOSTCC="gcc" + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +### End Options.lb end diff --git a/src/mainboard/arima/hdama/chip.h b/src/mainboard/arima/hdama/chip.h index ba52d6dbdb..c3792f41e9 100644 --- a/src/mainboard/arima/hdama/chip.h +++ b/src/mainboard/arima/hdama/chip.h @@ -1,4 +1,4 @@ -extern struct chip_control mainboard_arima_hdama_control; +extern struct chip_operations mainboard_arima_hdama_ops; struct mainboard_arima_hdama_config { int nothing; diff --git a/src/mainboard/arima/hdama/mainboard.c b/src/mainboard/arima/hdama/mainboard.c index 81f82b3d75..78b8715640 100644 --- a/src/mainboard/arima/hdama/mainboard.c +++ b/src/mainboard/arima/hdama/mainboard.c @@ -9,7 +9,6 @@ #include <delay.h> #include <arch/io.h> -#include <device/chip.h> #include "../../../northbridge/amd/amdk8/northbridge.h" #include "../../../northbridge/amd/amdk8/cpu_rev.c" #include "chip.h" @@ -312,13 +311,12 @@ static struct device_operations mainboard_operations = { .enable = 0, }; -static void enumerate(struct chip *chip) +static void enable_dev(struct chip *chip) { dev_root.ops = &mainboard_operations; - chip_enumerate(chip); } -struct chip_control mainboard_arima_hdama_control = { - .enumerate = enumerate, +struct chip_operations mainboard_arima_hdama_ops = { .name = "Arima HDAMA mainboard ", + .enable_dev = enable_dev, }; |