diff options
Diffstat (limited to 'src/mainboard/amd/serenade/resourcemap.c')
| -rw-r--r-- | src/mainboard/amd/serenade/resourcemap.c | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/src/mainboard/amd/serenade/resourcemap.c b/src/mainboard/amd/serenade/resourcemap.c deleted file mode 100644 index 2e026d07e7..0000000000 --- a/src/mainboard/amd/serenade/resourcemap.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * AMD Serenade needs a different resource map - * - */ - -static void setup_amd_serenade_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Base and Limit i Registers */ - /* Base = 0x8000, Limit = 0xffff, Read/Write, DstNode = 0, DstLink = LDT2 */ - PCI_ADDR(0, 0x18, 1, 0xbc), 0x00000048, 0x00ffff20, - PCI_ADDR(0, 0x18, 1, 0xb8), 0x000000f0, 0x00fc0003, - /* Base = 0x0a00, Limit = 0x0b00, Read/Write, DstNode = 0, DstLink = LDT2 */ - PCI_ADDR(0, 0x18, 1, 0xac), 0x00000048, 0x00000b20, - PCI_ADDR(0, 0x18, 1, 0xa8), 0x000000f0, 0x00000a03, - PCI_ADDR(0, 0x18, 1, 0xb4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xb0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xac), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xa8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xa4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xa0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9c), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8c), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - - /* PCI I/O Base and Limit i Registers */ - /* Base = 0x0000, Limit = 0x1fff, Read/Write, VAG/ISA enabled, - DstNode = 0, DstLink = LDT2 */ - PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers for Non-coherent HT - * Bus 0x00 - 0xff, DstNode = 0, DstLink = LDT2, Read/Write */ - PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0x00000000, - }; - int max; - max = sizeof(register_values)/sizeof(register_values[0]); - setup_resource_map(register_values, max); -} |