diff options
Diffstat (limited to 'src/mainboard/amd/quartet')
-rw-r--r-- | src/mainboard/amd/quartet/Config.lb | 71 | ||||
-rw-r--r-- | src/mainboard/amd/quartet/auto.c | 49 | ||||
-rw-r--r-- | src/mainboard/amd/quartet/failover.c | 4 | ||||
-rw-r--r-- | src/mainboard/amd/quartet/irq_tables.c | 57 | ||||
-rw-r--r-- | src/mainboard/amd/quartet/mptable.c | 12 |
5 files changed, 105 insertions, 88 deletions
diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb index 90f56355f6..cbcb340fe2 100644 --- a/src/mainboard/amd/quartet/Config.lb +++ b/src/mainboard/amd/quartet/Config.lb @@ -15,6 +15,9 @@ uses _ROMBASE uses XIP_ROM_SIZE uses XIP_ROM_BASE +## ROM_SIZE is the size of boot ROM that this board will use. +default ROM_SIZE 524288 + ### ### Build options ### @@ -68,9 +71,6 @@ option MAINBOARD_VENDOR="AMD" ### LinuxBIOS layout values ### -## ROM_SIZE is the size of boot ROM that this board will use. -option ROM_SIZE = 524288 - ## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. option ROM_IMAGE_SIZE = 65536 @@ -159,7 +159,7 @@ makerule ./auto.E end makerule ./auto.inc depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" + action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" end ## @@ -229,32 +229,30 @@ northbridge amd/amdk8 "mc0" pci 0:18.1 pci 0:18.2 pci 0:18.3 - southbridge amd/amd8131 "amd8131" - pci 0:0.0 - pci 0:0.1 - pci 0:1.0 - pci 0:1.1 - end - southbridge amd/amd8111 "amd8111" - pci 0:0.0 - pci 0:1.0 - pci 0:1.1 - pci 0:1.2 - pci 0:1.3 - pci 0:1.5 - pci 0:1.6 - superio NSC/pc87360 - pnp 1:2e.0 - pnp 1:2e.1 - pnp 1:2e.2 - pnp 1:2e.3 - pnp 1:2e.4 - pnp 1:2e.5 - pnp 1:2e.6 - pnp 1:2e.7 - pnp 1:2e.8 - pnp 1:2e.9 - pnp 1:2e.a + southbridge amd/amd8111 "amd8111" link 2 + pci 0:0.0 on + pci 0:1.0 on + pci 0:1.1 on + pci 0:1.2 on + pci 0:1.3 on + pci 0:1.5 on + pci 0:1.6 on + pci 1:0.0 on + pci 1:0.1 on + pci 1:0.2 on + pci 1:1.0 on + superio NSC/pc87360 link 1 + pnp 2e.0 + pnp 2e.1 + pnp 2e.2 + pnp 2e.3 + pnp 2e.4 + pnp 2e.5 + pnp 2e.6 + pnp 2e.7 + pnp 2e.8 + pnp 2e.9 + pnp 2e.a register "com1" = "{1, 0, 0x3f8, 4}" register "lpt" = "{1}" end @@ -268,6 +266,18 @@ northbridge amd/amdk8 "mc1" pci 0:19.1 pci 0:19.2 pci 0:19.3 + southbridge amd/amd8131 "amd8131" link 1 + pci 0:0.0 + pci 0:0.1 + pci 0:1.0 + pci 0:1.1 + end + southbridge amd/amd8131 "amd8131" link 1 + pci 0:0.0 + pci 0:0.1 + pci 0:1.0 + pci 0:1.1 + end end northbridge amd/amdk8 "mc2" @@ -289,7 +299,6 @@ northbridge amd/amdk8 "mc3" end cpu k8 "cpu0" - register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }" end cpu k8 "cpu1" diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c index 23951738c6..d7507fd12d 100644 --- a/src/mainboard/amd/quartet/auto.c +++ b/src/mainboard/amd/quartet/auto.c @@ -19,25 +19,32 @@ #include "cpu/p6/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "debug.c" +#include "northbridge/amd/amdk8/cpu_rev.c" #define SIO_BASE 0x2e static void memreset_setup(void) { - /* Set the memreset low */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 30); - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 31); + if (is_cpu_pre_c0()) { + /* Set the memreset low */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); + /* Ensure the BIOS has control of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); + } + else { + /* Ensure the CPU has controll of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); + } } static void memreset(int controllers, const struct mem_controller *ctrl) { - udelay(800); - /* Set memreset_high */ - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); + if (is_cpu_pre_c0()) { + udelay(800); + /* Set memreset_high */ + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); + udelay(90); + } } /* @@ -110,9 +117,6 @@ static void coherent_ht_mainboard(unsigned cpus) { } -#include "northbridge/amd/amdk8/cpu_ldtstop.c" -#include "southbridge/amd/amd8111/amd8111_ldtstop.c" - #include "northbridge/amd/amdk8/raminit.c" #define CONNECTION_0_1 UP @@ -272,8 +276,21 @@ static void main(void) #endif #if 0 ram_check(0x00000000, msr.lo); -#else - /* Check 16MB of memory */ - ram_check(0x00000000, 0x01000000); +#endif +#if 0 + static const struct { + unsigned long lo, hi; + } check_addrs[] = { + /* Check 16MB of memory @ 0*/ + { 0x00000000, 0x01000000 }, +#if 0 + /* Check 16MB of memory @ 2GB */ + { 0x80000000, 0x81000000 }, +#endif + }; + int i; + for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) { + ram_check(check_addrs[i].lo, check_addrs[i].hi); + } #endif } diff --git a/src/mainboard/amd/quartet/failover.c b/src/mainboard/amd/quartet/failover.c index 8eeeaef7e1..bd9c17020e 100644 --- a/src/mainboard/amd/quartet/failover.c +++ b/src/mainboard/amd/quartet/failover.c @@ -27,6 +27,10 @@ static void main(void) asm("jmp __cpu_reset"); } } + /* Is this a deliberate reset by the bios */ + else if (bios_reset_detected() && last_boot_normal()) { + asm("jmp __normal_image"); + } /* Is this a secondary cpu? */ else if (!boot_cpu() && last_boot_normal()) { asm("jmp __normal_image"); diff --git a/src/mainboard/amd/quartet/irq_tables.c b/src/mainboard/amd/quartet/irq_tables.c index 5e4437ca11..142864fbb1 100644 --- a/src/mainboard/amd/quartet/irq_tables.c +++ b/src/mainboard/amd/quartet/irq_tables.c @@ -1,43 +1,34 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - #include <arch/pirq_routing.h> - const struct irq_routing_table intel_irq_routing_table = { PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ - 32+16*18, /* there can be total 18 devices on the bus */ - 0, /* Where the interrupt router lies (bus) */ - 0x23, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ + 32+16*9, /* there can be total 9 devices on the bus */ + 1, /* Where the interrupt router lies (bus) */ + (4<<3)|3, /* Where the interrupt router lies (dev) */ + 0x0, /* IRQs devoted exclusively to PCI usage */ 0x1022, /* Vendor */ 0x746b, /* Device */ - 0, /* Crap (miniport) */ + 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x35, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - {0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0,0x50, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x2,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x3, 0}, - {0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, - {0x1,0x18, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0x0, 0}, - {0x1,0x20, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0x0, 0}, - {0x2,0x28, {{0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0xa, 0}, - {0,0x58, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x1, 0}, - {0x3,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x2, 0}, - {0x3,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x9, 0}, - {0,0x30, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0x1,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x1,0x28, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0}, - {0x1,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x6, 0}, - {0x1,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0xb, 0}, - {0,0x38, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, - {0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0}, + 0xb0, /* u8 checksum , mod 256 checksum must give zero */ + { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + /* PCI Slot 1 */ + {0x03, (0x01<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x01, 0}, + /* PCI Slot 2 */ + {0x03, (0x02<<3)|0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}}, 0x02, 0}, + /* PCI Slot 3 */ + {0x02, (0x01<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x03, 0}, + /* PCI Slot 4 */ + {0x02, (0x02<<3)|0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}}, 0x04, 0}, + /* PCI Slot 5 */ + {0x04, (0x05<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x05, 0}, + /* PCI Slot 6 */ + {0x04, (0x04<<3)|0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}}, 0x06, 0}, + /* Onboard NICS */ + {0x02, (0x03<<3)|0, {{0x04, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0}, + {0x02, (0x04<<3)|0, {{0x04, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0}, + /* Let Linux know about bus 1 */ + {0x01, (0x04<<3)|3, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0}, } }; diff --git a/src/mainboard/amd/quartet/mptable.c b/src/mainboard/amd/quartet/mptable.c index 6c29589a81..03ff598877 100644 --- a/src/mainboard/amd/quartet/mptable.c +++ b/src/mainboard/amd/quartet/mptable.c @@ -48,8 +48,8 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) else { printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); - bus_8111_1 = 3; - bus_isa = 4; + bus_8111_1 = 4; + bus_isa = 5; } /* 8131-1 */ dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); @@ -60,7 +60,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) else { printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); - bus_8131_1 = 1; + bus_8131_1 = 2; } /* 8131-2 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); @@ -71,7 +71,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) else { printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); - bus_8131_2 = 2; + bus_8131_2 = 3; } } @@ -144,10 +144,6 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) bus_isa, 0x00, MP_APIC_ALL, 0x01); - /* AGP Slot */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - 0x03, (6<<2)|0, 0x02, 0x12); - /* PCI Slot 1 */ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (1<<2)|0, 0x02, 0x11); |