diff options
Diffstat (limited to 'src/mainboard/amd/bettong')
24 files changed, 0 insertions, 1942 deletions
diff --git a/src/mainboard/amd/bettong/BiosCallOuts.c b/src/mainboard/amd/bettong/BiosCallOuts.c deleted file mode 100644 index 22a8403119..0000000000 --- a/src/mainboard/amd/bettong/BiosCallOuts.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci_def.h> -#include <device/device.h> -#include <AGESA.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <northbridge/amd/pi/00660F01/chip.h> -#include <FchPlatform.h> -#include <stdlib.h> -#include <string.h> -#include <northbridge/amd/pi/dimmSpd.h> -#include <boardid.h> - -#include "imc.h" -#include "hudson.h" - -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr); -static AGESA_STATUS board_ReadSpd(UINT32 Func, UINTN Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_READ_SPD, board_ReadSpd }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, - {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -static const GPIO_CONTROL oem_bettong_gpio[] = { - {86, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE | DrvStrengthSel_12mA}, - {64, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE | DrvStrengthSel_12mA}, - {-1} -}; - -/* Bettong Hardware Monitor Fan Control - * Hardware limitation: - * HWM will fail to read the input temperature via I2C if other - * software switches the I2C address. AMD recommends using IMC - * to control fans, instead of HWM. - */ -static void oem_fan_control(FCH_DATA_BLOCK *FchParams) -{ - /* Enable IMC fan control. the recommand way */ - imc_reg_init(); - - FchParams->Imc.ImcEnable = TRUE; - FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ - FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */ - - memset(&FchParams->Imc.EcStruct, 0, sizeof(FCH_EC)); -} - -/** - * Fch Oem setting callback - * - * Configure platform specific Hudson device, - * such as Azalia, SATA, IMC etc. - */ -AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr) -{ - AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; - - if (StdHeader->Func == AMD_INIT_RESET) { - FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); - - FchParams_reset->FchReset.Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE); - FchParams_reset->FchReset.Xhci1Enable = FALSE; - FchParams_reset->EarlyOemGpioTable = oem_bettong_gpio; - } else if (StdHeader->Func == AMD_INIT_ENV) { - FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); - - if (CONFIG(HUDSON_IMC_FWM)) - oem_fan_control(FchParams_env); - - /* XHCI configuration */ - if (CONFIG(HUDSON_XHCI_ENABLE)) - FchParams_env->Usb.Xhci0Enable = TRUE; - else - FchParams_env->Usb.Xhci0Enable = FALSE; - - FchParams_env->Usb.Xhci1Enable = FALSE; - FchParams_env->Usb.USB30PortInit = 8; /* 8: If USB3 port is irremovable. */ - - /* sata configuration */ - /* SD configuration */ - /* Rev F has an on-board eMMC, which only supports SD 2.0 */ - if (board_id() == 'F') { - FchParams_env->Sd.SdConfig = SdVer2; - } - } - printk(BIOS_DEBUG, "Done\n"); - - return AGESA_SUCCESS; -} - -static AGESA_STATUS board_ReadSpd(UINT32 Func, UINTN Data, VOID *ConfigPtr) -{ - AGESA_READ_SPD_PARAMS *info = ConfigPtr; - int spdAddress; - - if (!ENV_ROMSTAGE) - return AGESA_UNSUPPORTED; - - DEVTREE_CONST struct device *dev = pcidev_on_root(0x18, 2); - - if (dev == NULL) - return AGESA_ERROR; - - DEVTREE_CONST struct northbridge_amd_pi_00660F01_config *config = dev->chip_info; - - if (config == NULL) - return AGESA_ERROR; - - UINT8 spdAddrLookup_rev_F [2][2][4]= { - { {0xA0, 0xA2}, {0xA4, 0xAC}, }, /* socket 0 - Channel 0 & 1 - 8-bit SPD addresses */ - { {0x00, 0x00}, {0x00, 0x00}, }, /* socket 1 - Channel 0 & 1 - 8-bit SPD addresses */ - }; - - if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup)) - return AGESA_ERROR; - if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0])) - return AGESA_ERROR; - if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0])) - return AGESA_ERROR; - if (board_id() == 'F') - spdAddress = spdAddrLookup_rev_F - [info->SocketId] [info->MemChannelId] [info->DimmId]; - else - spdAddress = config->spdAddrLookup - [info->SocketId] [info->MemChannelId] [info->DimmId]; - - if (spdAddress == 0) - return AGESA_ERROR; - int err = hudson_readSpd(spdAddress, (void *) info->Buffer, 128); - if (err) - return AGESA_ERROR; - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/amd/bettong/BiosCallOuts.h b/src/mainboard/amd/bettong/BiosCallOuts.h deleted file mode 100644 index 8c2a047099..0000000000 --- a/src/mainboard/amd/bettong/BiosCallOuts.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define FAN_INPUT_INTERNAL_DIODE 0 -#define FAN_INPUT_TEMP0 1 -#define FAN_INPUT_TEMP1 2 -#define FAN_INPUT_TEMP2 3 -#define FAN_INPUT_TEMP3 4 -#define FAN_INPUT_TEMP0_FILTER 5 -#define FAN_INPUT_ZERO 6 -#define FAN_INPUT_DISABLED 7 - -#define FAN_AUTOMODE (1 << 0) -#define FAN_LINEARMODE (1 << 1) -#define FAN_STEPMODE ~(1 << 1) -#define FAN_POLARITY_HIGH (1 << 2) -#define FAN_POLARITY_LOW ~(1 << 2) - -/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ -#define FREQ_28KHZ 0x0 -#define FREQ_25KHZ 0x1 -#define FREQ_23KHZ 0x2 -#define FREQ_21KHZ 0x3 -#define FREQ_29KHZ 0x4 -#define FREQ_18KHZ 0x5 -#define FREQ_100HZ 0xF7 -#define FREQ_87HZ 0xF8 -#define FREQ_58HZ 0xF9 -#define FREQ_44HZ 0xFA -#define FREQ_35HZ 0xFB -#define FREQ_29HZ 0xFC -#define FREQ_22HZ 0xFD -#define FREQ_14HZ 0xFE -#define FREQ_11HZ 0xFF diff --git a/src/mainboard/amd/bettong/Kconfig b/src/mainboard/amd/bettong/Kconfig deleted file mode 100644 index 4617360ea1..0000000000 --- a/src/mainboard/amd/bettong/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2015 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -config BOARD_AMD_BETTONG - def_bool n - -if BOARD_AMD_BETTONG - -config BOARD_SPECIFIC_OPTIONS - def_bool y - #select BINARYPI_LEGACY_WRAPPER - #select ROMCC_BOOTBLOCK - select CPU_AMD_PI_00660F01 - select NORTHBRIDGE_AMD_PI_00660F01 - select SOUTHBRIDGE_AMD_PI_KERN - select DEFAULT_POST_ON_LPC - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_8192 - select GFXUMA - -config MAINBOARD_DIR - string - default "amd/bettong" - -config MAINBOARD_PART_NUMBER - string - default "FP4" - -config MAX_CPUS - int - default 4 - -config IRQ_SLOT_COUNT - int - default 11 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config HUDSON_LEGACY_FREE - bool - default y - -endif # BOARD_AMD_BETTONG diff --git a/src/mainboard/amd/bettong/Kconfig.name b/src/mainboard/amd/bettong/Kconfig.name deleted file mode 100644 index 4bd13291cd..0000000000 --- a/src/mainboard/amd/bettong/Kconfig.name +++ /dev/null @@ -1,3 +0,0 @@ -# Disabled -#config BOARD_AMD_BETTONG -# bool "Bettong" diff --git a/src/mainboard/amd/bettong/Makefile.inc b/src/mainboard/amd/bettong/Makefile.inc deleted file mode 100644 index cfcc9c0744..0000000000 --- a/src/mainboard/amd/bettong/Makefile.inc +++ /dev/null @@ -1,23 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2015 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -romstage-y += BiosCallOuts.c -romstage-y += OemCustomize.c -romstage-y += boardid.c - -ramstage-y += BiosCallOuts.c -ramstage-y += OemCustomize.c -ramstage-$(CONFIG_HUDSON_IMC_FWM) += fchec.c -ramstage-y += boardid.c diff --git a/src/mainboard/amd/bettong/OemCustomize.c b/src/mainboard/amd/bettong/OemCustomize.c deleted file mode 100644 index 0e7882fb2e..0000000000 --- a/src/mainboard/amd/bettong/OemCustomize.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <AGESA.h> -#include <PlatformMemoryConfiguration.h> -#include <boardid.h> - - -static const PCIe_PORT_DESCRIPTOR PortList[] = { - /* Initialize Port descriptor (PCIe port, Lanes 8-15, PCI Device Number 3, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 8, 15), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 3, 1, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x02, 0) - }, - - /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 5, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x03, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PcieUnusedEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER_V2(PortDisabled, ChannelTypeExt6db, 2, 4, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x04, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PcieUnusedEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 3, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x05, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 4-5, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 5), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 2, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x06, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 0-3, PCI Device Number 2, ...) */ - { - DESCRIPTOR_TERMINATE_LIST, /* Descriptor flags !!!IMPORTANT!!! Terminate last element of array */ - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 1, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x07, 0) - }, - -}; - -static const PCIe_DDI_DESCRIPTOR DdiList[] = { - /* DP0 */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 16, 19), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux1, Hdp1) - }, - /* DP1 */ - { - 0, /*DESCRIPTOR_TERMINATE_LIST, */ - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 20, 23), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux2, Hdp2) - }, - /* DP2 */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 24, 27), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux3, Hdp3) - }, -}; - -static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { - .Flags = DESCRIPTOR_TERMINATE_LIST, - .SocketId = 0, - .PciePortList = PortList, - .DdiLinkList = DdiList -}; - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This is the stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - InitEarly->GnbConfig.PcieComplexList = &PcieComplex; -} - -static const PSO_ENTRY DDR4PlatformMemoryConfiguration[] = { - DRAM_TECHNOLOGY(ANY_SOCKET, DDR4_TECHNOLOGY), - NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 2), - MOTHER_BOARD_LAYERS(LAYERS_6), - MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0xff, 0xff, 0xff, 0xff), - ODT_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0xff, 0xff, 0xff, 0xff), - CS_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00), - PSO_END -}; - -void OemPostParams(AMD_POST_PARAMS *PostParams) -{ - if (board_id() == 'F') { - PostParams->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)DDR4PlatformMemoryConfiguration; - } -} diff --git a/src/mainboard/amd/bettong/README b/src/mainboard/amd/bettong/README deleted file mode 100644 index 631cf0f0ef..0000000000 --- a/src/mainboard/amd/bettong/README +++ /dev/null @@ -1,25 +0,0 @@ -coreboot is changing all the time and the patches are reabsed when pushed to -community, so it is a little difficult to provide stable Bettong code. -From now on, AMD provides source code which is validated by QA team. -The code is pushed to github https://github.com/BTDC/coreboot -The version is identified by a tag. All the changes will be pushed to coreboot -community. - -===== -Version: TCMEF1F0 Release Date: 09/29/2015 - -Changes from last version: -1. Fix external graphics issue. -2. Add board ID support. -3. Support DDR4. -4. Support SD 2.0. -5. Fix Windows 7 S4 issue. -6. Add GPIO, I2C and UART support. -7. Fix the interrupt routine. -8. Restruct PCI interrupt table (C00/C01). -9. Fix DSDT issue. -10. Fix the PCIe lane map. -11. Lower the TOM to give more MMIO space. -12. Add USB device. -13. Set the USB3 port as irremovable. -14. Update AGESA to CarrizoPI 1.1.0.1. diff --git a/src/mainboard/amd/bettong/acpi/carrizo_fch.asl b/src/mainboard/amd/bettong/acpi/carrizo_fch.asl deleted file mode 100644 index 79f54203d2..0000000000 --- a/src/mainboard/amd/bettong/acpi/carrizo_fch.asl +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -Device(GPIO) { - Name (_HID, "AMD0030") - Name (_CID, "AMD0030") - Name(_UID, 0) - - Method (_CRS, 0x0, NotSerialized) { - Name (RBUF, ResourceTemplate () { - // - // Interrupt resource. In this example, banks 0 & 1 share the same - // interrupt to the parent controller and similarly banks 2 & 3. - // - // N.B. The definition below is chosen for an arbitrary - // test platform. It needs to be changed to reflect the hardware - // configuration of the actual platform - // - Interrupt(ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} - - // - // Memory resource. The definition below is chosen for an arbitrary - // test platform. It needs to be changed to reflect the hardware - // configuration of the actual platform. - // - Memory32Fixed(ReadWrite, 0xFED81500, 0x300) - }) - - Return (RBUF) - } - - Method (_STA, 0x0, NotSerialized) { - Return (0x0F) - } -} - -Device(FUR0) { - Name(_HID,"AMD0020") - Name(_UID,0x0) - Name(_CRS, ResourceTemplate() { - IRQ(Edge, ActiveHigh, Exclusive) {10} - Memory32Fixed(ReadWrite, 0xFEDC6000, 0x2000) - }) - Method (_STA, 0x0, NotSerialized) { - Return (0x0F) - } -} - -Device(FUR1) { - Name(_HID,"AMD0020") - Name(_UID,0x1) - Name(_CRS, ResourceTemplate() { - IRQ(Edge, ActiveHigh, Exclusive) {11} - Memory32Fixed(ReadWrite, 0xFEDC8000, 0x2000) - }) - Method (_STA, 0x0, NotSerialized) { - Return (0x0F) - } -} - -Device(I2CA) { - Name(_HID,"AMD0010") - Name(_UID,0x0) - Name(_CRS, ResourceTemplate() { - IRQ(Edge, ActiveHigh, Exclusive) {3} - Memory32Fixed(ReadWrite, 0xFEDC2000, 0x1000) - }) - - Method (_STA, 0x0, NotSerialized) { - Return (0x0F) - } -} - -Device(I2CB) -{ - Name(_HID,"AMD0010") - Name(_UID,0x1) - Name(_CRS, ResourceTemplate() { - IRQ(Edge, ActiveHigh, Exclusive) {15} - Memory32Fixed(ReadWrite, 0xFEDC3000, 0x1000) - }) - Method (_STA, 0x0, NotSerialized) { - Return (0x0F) - } -} diff --git a/src/mainboard/amd/bettong/acpi/gpe.asl b/src/mainboard/amd/bettong/acpi/gpe.asl deleted file mode 100644 index 87b0d2169d..0000000000 --- a/src/mainboard/amd/bettong/acpi/gpe.asl +++ /dev/null @@ -1,74 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -Scope(\_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - /* Notify (\_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ diff --git a/src/mainboard/amd/bettong/acpi/mainboard.asl b/src/mainboard/amd/bettong/acpi/mainboard.asl deleted file mode 100644 index db5731f088..0000000000 --- a/src/mainboard/amd/bettong/acpi/mainboard.asl +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ diff --git a/src/mainboard/amd/bettong/acpi/routing.asl b/src/mainboard/amd/bettong/acpi/routing.asl deleted file mode 100644 index 0c4edbbee9..0000000000 --- a/src/mainboard/amd/bettong/acpi/routing.asl +++ /dev/null @@ -1,247 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -#include <arch/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - F16 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ - Package(){0x0001FFFF, 0, INTB, 0 }, - Package(){0x0001FFFF, 1, INTC, 0 }, - - - /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* FCH devices */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, INTC, 0 }, - Package(){0x0010FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, INTD, 0 }, - -}) - -Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - F15 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - Package(){0x0001FFFF, 0, 0, 43 }, - Package(){0x0001FFFF, 1, 0, 40 }, - - /* Bus 0, Dev 2 - PCIe Bridges */ - Package(){0x0002FFFF, 0, 0, 44 }, - Package(){0x0002FFFF, 1, 0, 45 }, - Package(){0x0002FFFF, 2, 0, 46 }, - Package(){0x0002FFFF, 3, 0, 47 }, - - Package(){0x0003FFFF, 0, 0, 49 }, - Package(){0x0003FFFF, 1, 0, 50 }, - Package(){0x0003FFFF, 2, 0, 51 }, - Package(){0x0003FFFF, 3, 0, 52 }, - - Package(){0x0008FFFF, 0, 0, 35 }, - Package(){0x0008FFFF, 1, 0, 32 }, - Package(){0x0008FFFF, 2, 0, 33 }, - Package(){0x0008FFFF, 3, 0, 34 }, - - /* SB devices in APIC mode */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, 0, 18}, - Package(){0x0010FFFF, 1, 0, 17}, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 9, Func 2 - HDAudio */ - Package(){0x0009FFFF, 0, 0, 39 }, - Package(){0x0009FFFF, 1, 0, 36 }, - Package(){0x0009FFFF, 2, 0, 37 }, - Package(){0x0009FFFF, 3, 0, 38 }, -}) - -Name(PS2, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS2, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GFX */ -Name(PS4, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 24 }, - Package(){0x0000FFFF, 1, 0, 25 }, - Package(){0x0000FFFF, 2, 0, 26 }, - Package(){0x0000FFFF, 3, 0, 27 }, -}) - -/* GPP 0 */ -Name(PS5, Package(){ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, -}) -Name(APS5, Package(){ - Package(){0x0000FFFF, 0, 0, 28 }, - Package(){0x0000FFFF, 1, 0, 29 }, - Package(){0x0000FFFF, 2, 0, 30 }, - Package(){0x0000FFFF, 3, 0, 31 }, -}) - -/* GPP 1 */ -Name(PS6, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS6, Package(){ - Package(){0x0000FFFF, 0, 0, 32 }, - Package(){0x0000FFFF, 1, 0, 33 }, - Package(){0x0000FFFF, 2, 0, 34 }, - Package(){0x0000FFFF, 3, 0, 35 }, -}) - -/* GPP 2 */ -Name(PS7, Package(){ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, -}) -Name(APS7, Package(){ - Package(){0x0000FFFF, 0, 0, 36 }, - Package(){0x0000FFFF, 1, 0, 37 }, - Package(){0x0000FFFF, 2, 0, 38 }, - Package(){0x0000FFFF, 3, 0, 39 }, -}) - -/* GPP 3 */ -Name(PS8, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS8, Package(){ - Package(){0x0000FFFF, 0, 0, 40 }, - Package(){0x0000FFFF, 1, 0, 41 }, - Package(){0x0000FFFF, 2, 0, 42 }, - Package(){0x0000FFFF, 3, 0, 43 }, -}) - -/* GFX 2 */ -Name(PSA, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APSA, Package(){ - Package(){0x0000FFFF, 0, 0, 52 }, - Package(){0x0000FFFF, 1, 0, 53 }, - Package(){0x0000FFFF, 2, 0, 54 }, - Package(){0x0000FFFF, 3, 0, 55 }, -}) - -/* GFX 3 */ -Name(PSB, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APSB, Package(){ - Package(){0x0000FFFF, 0, 0, 27 }, - Package(){0x0000FFFF, 1, 0, 24 }, - Package(){0x0000FFFF, 2, 0, 25 }, - Package(){0x0000FFFF, 3, 0, 26 }, -}) - -/* GFX 4 */ -Name(PSC, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APSC, Package(){ - Package(){0x0000FFFF, 0, 0, 31 }, - Package(){0x0000FFFF, 1, 0, 28 }, - Package(){0x0000FFFF, 2, 0, 29 }, - Package(){0x0000FFFF, 3, 0, 30 }, -}) diff --git a/src/mainboard/amd/bettong/acpi/sleep.asl b/src/mainboard/amd/bettong/acpi/sleep.asl deleted file mode 100644 index 58f0752f30..0000000000 --- a/src/mainboard/amd/bettong/acpi/sleep.asl +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* \_PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ -Method(_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Clear wake status structure. */ - Store(0, PEWD) - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - Store(7, UPWS) -} /* End Method(\_PTS) */ - -/* -* \_BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* \_WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - Return(WKST) -} /* End Method(\_WAK) */ diff --git a/src/mainboard/amd/bettong/acpi/usb_oc.asl b/src/mainboard/amd/bettong/acpi/usb_oc.asl deleted file mode 100644 index 328883af91..0000000000 --- a/src/mainboard/amd/bettong/acpi/usb_oc.asl +++ /dev/null @@ -1,129 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -#include <arch/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) - -/* USB Overcurrent GPEs */ - -#if 0 /* TODO: Update for Bettong */ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - } - } -} -#endif diff --git a/src/mainboard/amd/bettong/acpi_tables.c b/src/mainboard/amd/bettong/acpi_tables.c deleted file mode 100644 index 9117c1ffdf..0000000000 --- a/src/mainboard/amd/bettong/acpi_tables.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/acpi.h> -#include <arch/ioapic.h> - -#define IO_APIC2_ADDR 0xFEC20000 - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write Kern IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, - IO_APIC_ADDR, 0); - - /* TODO: Remove the hardcode */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, - IO_APIC2_ADDR, 24); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/amd/bettong/board_info.txt b/src/mainboard/amd/bettong/board_info.txt deleted file mode 100644 index b351b8e696..0000000000 --- a/src/mainboard/amd/bettong/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/amd/bettong/boardid.c b/src/mainboard/amd/bettong/boardid.c deleted file mode 100644 index 21d0476204..0000000000 --- a/src/mainboard/amd/bettong/boardid.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <amdblocks/acpimmio.h> -#include <device/mmio.h> -#include <southbridge/amd/common/amd_defs.h> -#include <boardid.h> - -/** - *Bettong uses 3 GPIO(5-7) pins to identify board. - *The GPIO ports are mapped to MMIO space. - *The GPIO value and board version are mapped as follow: - *GPIO5 GPIO6 GPIO7 Version - * 0 0 0 A - * 0 0 1 B - * ...... - * 1 1 1 H - */ -uint32_t board_id(void) -{ - u8 value = 0; - u8 boardrev = 0; - char boardid; - - value = gpio0_read8((7 << 2) + 2); /* agpio7: board_id2 */ - boardrev = value & 1; - value = gpio0_read8((6 << 2) + 2); /* agpio6: board_id1 */ - boardrev |= (value & 1) << 1; - value = gpio0_read8((5 << 2) + 2); /* agpio5: board_id0 */ - boardrev |= (value & 1) << 2; - - boardid = 'A' + boardrev; - - return boardid; -} diff --git a/src/mainboard/amd/bettong/cmos.layout b/src/mainboard/amd/bettong/cmos.layout deleted file mode 100644 index 49878e25b1..0000000000 --- a/src/mainboard/amd/bettong/cmos.layout +++ /dev/null @@ -1,101 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2015 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -386 1 e 1 ECC_memory -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/bettong/devicetree.cb b/src/mainboard/amd/bettong/devicetree.cb deleted file mode 100644 index c447bcad95..0000000000 --- a/src/mainboard/amd/bettong/devicetree.cb +++ /dev/null @@ -1,67 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2015 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -chip northbridge/amd/pi/00660F01/root_complex - device cpu_cluster 0 on - chip cpu/amd/pi/00660F01 - device lapic 10 on end - end - end - - device domain 0 on - subsystemid 0x1022 0x1410 inherit - - chip northbridge/amd/pi/00660F01 - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector - device pci 3.0 on end # Edge Connector - device pci 3.1 on end # Edge Connector - end #chip northbridge/amd/pi/00660F01 - - chip southbridge/amd/pi/hudson - device pci 9.0 on end # HDA - device pci 9.2 on end # HDA - device pci 10.0 on end # USB - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 14.0 on end # SM - #device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - end #chip southbridge/amd/pi/hudson - - chip northbridge/amd/pi/00660F01 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - end - - end #domain -end #northbridge/amd/pi/00660F01/root_complex diff --git a/src/mainboard/amd/bettong/dsdt.asl b/src/mainboard/amd/bettong/dsdt.asl deleted file mode 100644 index f6449ece99..0000000000 --- a/src/mainboard/amd/bettong/dsdt.asl +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* DefinitionBlock Statement */ -#include <arch/acpi.h> -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - OEM_ID, - ACPI_TABLE_CREATOR, - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Globals for the platform */ - #include "acpi/mainboard.asl" - - /* Describe the USB Overcurrent pins */ - #include "acpi/usb_oc.asl" - - /* PCI IRQ mapping for the Southbridge */ - #include <southbridge/amd/pi/hudson/acpi/pcie.asl> - - /* Describe the processor tree (\_PR) */ - #include <cpu/amd/pi/00660F01/acpi/cpu.asl> - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - /* global utility methods expected within the \_SB scope */ - #include <arch/x86/acpi/globutil.asl> - - /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */ - #include "acpi/routing.asl" - - Device(PWRB) { - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) - Name(_STA, 0x0B) - } - - Device(PCI0) { - /* Describe the AMD Northbridge */ - #include <northbridge/amd/pi/00660F01/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/pi/hudson/acpi/fch.asl> - } - - /* Describe PCI INT[A-H] for the Southbridge */ - #include <southbridge/amd/pi/hudson/acpi/pci_int.asl> - - /* Describe the devices in the Southbridge */ - #include "acpi/carrizo_fch.asl" - - } /* End \_SB scope */ - - /* Describe SMBUS for the Southbridge */ - #include <southbridge/amd/pi/hudson/acpi/smbus.asl> - - /* Define the General Purpose Events for the platform */ - #include "acpi/gpe.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/amd/bettong/fchec.c b/src/mainboard/amd/bettong/fchec.c deleted file mode 100644 index ea7dc569c7..0000000000 --- a/src/mainboard/amd/bettong/fchec.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "fchec.h" - -void agesawrapper_fchecfancontrolservice() -{ - FCH_DATA_BLOCK LateParams; - - /* Thermal Zone Parameter */ - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0xc6; - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM stepping rate in unit of PWM level percentage */ - LateParams.Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; - - /* IMC Fan Policy temperature thresholds */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x3c; /*AC0 threshold in Celsius */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x28; /*AC1 threshold in Celsius */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0xff; /*AC2 threshold in Celsius */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ - LateParams.Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; - - /* IMC Fan Policy PWM Settings */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x50; /* AL0 percentage */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x32; /* AL1 percentage */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0xff; /* AL2 percentage */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ - LateParams.Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ - - LateParams.Imc.EcStruct.IMCFUNSupportBitMap = 0x111; - - FchECfancontrolservice(&LateParams); -} diff --git a/src/mainboard/amd/bettong/irq_tables.c b/src/mainboard/amd/bettong/irq_tables.c deleted file mode 100644 index 7334bb2fd8..0000000000 --- a/src/mainboard/amd/bettong/irq_tables.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "%s done.\n", __func__); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/amd/bettong/mainboard.c b/src/mainboard/amd/bettong/mainboard.c deleted file mode 100644 index 8e2ecfd8e1..0000000000 --- a/src/mainboard/amd/bettong/mainboard.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <southbridge/amd/common/amd_pci_util.h> - -/*********************************************************** - * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. - * This table is responsible for physically routing the PIC and - * IOAPIC IRQs to the different PCI devices on the system. It - * is read and written via registers 0xC00/0xC01 as an - * Index/Data pair. These values are chipset and mainboard - * dependent and should be updated accordingly. - * - * These values are used by the PCI configuration space, - * MP Tables. TODO: Make ACPI use these values too. - */ -static const u8 mainboard_picr_data[] = { - [0x00] = 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F, - [0x08] = 0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - [0x10] = 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F, - [0x18] = 0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00, - [0x28] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x30] = 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05, - [0x38] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x40] = 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00, - [0x48] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x50] = 0x03,0x04,0x05,0x07,0x1F,0x1F,0x1F,0x1F, - [0x58] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, - [0x60] = 0x1F,0x1F,0x07,0x1F,0x1F,0x1F,0x1F,0x1F, - [0x68] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, - [0x70] = 0x03,0x0F,0x06,0x0E,0x0A,0x0B,0x1F,0x1F, - [0x78] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, -}; - -static const u8 mainboard_intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x1F,0x1F,0x10, - [0x18] = 0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00, - [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00, - [0x28] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00, - [0x38] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x40] = 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00, - [0x48] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x50] = 0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00, - [0x58] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x60] = 0x1F,0x1F,0x07,0x00,0x00,0x00,0x00,0x00, - [0x68] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - [0x70] = 0x03,0x0F,0x06,0x0E,0x0A,0x0B,0x1F,0x1F, - [0x78] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -}; - -/* PIRQ Setup */ -static void pirq_setup(void) -{ - intr_data_ptr = mainboard_intr_data; - picr_data_ptr = mainboard_picr_data; -} - - - -/************************************************* - * enable the dedicated function in bettong board. - *************************************************/ -static void bettong_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - /* Initialize the PIRQ data structures for consumption */ - pirq_setup(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = bettong_enable, -}; diff --git a/src/mainboard/amd/bettong/mptable.c b/src/mainboard/amd/bettong/mptable.c deleted file mode 100644 index d9632d58d1..0000000000 --- a/src/mainboard/amd/bettong/mptable.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <cpu/x86/lapic.h> -#include <southbridge/amd/pi/hudson/hudson.h> -#include <southbridge/amd/common/amd_pci_util.h> - -static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned int length) -{ - mc->mpc_length += length; - mc->mpc_entry_count++; -} - -static void my_smp_write_bus(struct mp_config_table *mc, - unsigned char id, const char *bustype) -{ - struct mpc_config_bus *mpc; - mpc = smp_next_mpc_entry(mc); - memset(mpc, '\0', sizeof(*mpc)); - mpc->mpc_type = MP_BUS; - mpc->mpc_busid = id; - memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); - smp_add_mpc_entry(mc, sizeof(*mpc)); -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - my_smp_write_bus(mc, 0, "PCI "); - my_smp_write_bus(mc, 1, "PCI "); - bus_isa = 0x02; - my_smp_write_bus(mc, bus_isa, "ISA "); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); - - smp_write_ioapic(mc, ioapic_id+1, 0x21, (void *)0xFEC20000); - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, int_sign, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) - - /* Internal VGA */ - PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[0x03]); - - /* SMBUS */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - - /* HD Audio */ - PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[0x13]); - - /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[0x30]); - PCI_INT(0x0, 0x12, 0x1, intr_data_ptr[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data_ptr[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data_ptr[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data_ptr[0x35]); - PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[0x36]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[0x40]); - PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - struct device *dev = pcidev_on_root(0x14, 4); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe Lan*/ - PCI_INT(0x0, 0x06, 0x0, 0x13); - - /* FCH PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* FCH PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* FCH PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* FCH PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/bettong/romstage.c b/src/mainboard/amd/bettong/romstage.c deleted file mode 100644 index 0f41f714e3..0000000000 --- a/src/mainboard/amd/bettong/romstage.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <northbridge/amd/agesa/state_machine.h> -#include <southbridge/amd/pi/hudson/hudson.h> - -/* Mask BIST bit 31. One result of Silicon Observation - * report_bist_failure(bist & 0x7FFFFFFF); - */ - -static void romstage_main_template(void) -{ - u32 val; - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - -#if CONFIG(HUDSON_UART) - configure_hudson_uart(); -#endif - post_code(0x31); - console_init(); - } -} - -void agesa_postcar(struct sysinfo *cb) -{ - /* After AMD_INIT_ENV -> move to ramstage ? */ - if (acpi_is_wakeup_s4()) { - outb(0xEE, PM_INDEX); - outb(0x8, PM_DATA); - } -} |