diff options
Diffstat (limited to 'src/mainboard/Iwill/DK8S2/auto.c')
-rw-r--r-- | src/mainboard/Iwill/DK8S2/auto.c | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/src/mainboard/Iwill/DK8S2/auto.c b/src/mainboard/Iwill/DK8S2/auto.c deleted file mode 100644 index 06b3e42cdf..0000000000 --- a/src/mainboard/Iwill/DK8S2/auto.c +++ /dev/null @@ -1,201 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" - - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void hard_reset(void) -{ - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - set_bios_reset(); - pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); -} - -/* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); - } else { - /* Ensure the CPU has controll of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset_high */ - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); - } -} - -static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) -{ - /* Routing Table Node i - * - * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c - * i: 0, 1, 2, 3, 4, 5, 6, 7 - * - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [11: 8] Response Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [19:16] Broadcast route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - - uint32_t ret=0x00010101; /* default row entry */ - - static const unsigned int rows_2p[2][2] = { - { 0x00050101, 0x00010404 }, - { 0x00010404, 0x00050101 } - }; - - if(maxnodes>2) { - print_debug("this mainboard is only designed for 2 cpus\r\n"); - maxnodes=2; - } - - if (!(node>=maxnodes || row>=maxnodes)) { - ret=rows_2p[node][row]; - } - - return ret; -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "sdram/generic_sdram.c" -#include "northbridge/amd/amdk8/resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - - int needs_reset; - unsigned nodeid; - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - /* Setup the console */ - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_default_resource_map(); - needs_reset = setup_coherent_ht_domain(); - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - -#if 0 - print_pci_devices(); -#endif - - enable_smbus(); - -#if 0 - dump_spd_registers(&cpu[0]); -#endif - - memreset_setup(); - sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); - -#if 0 - dump_pci_devices(); - dump_pci_device(PCI_DEV(0, 0x18, 2)); -#endif -} |