diff options
Diffstat (limited to 'src/include')
| -rw-r--r-- | src/include/uart8250.h | 108 |
1 files changed, 0 insertions, 108 deletions
diff --git a/src/include/uart8250.h b/src/include/uart8250.h deleted file mode 100644 index c63153c632..0000000000 --- a/src/include/uart8250.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Eric Biederman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef UART8250_H -#define UART8250_H - -/* Data */ -#define UART_RBR 0x00 -#define UART_TBR 0x00 - -/* Control */ -#define UART_IER 0x01 -#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ - -#define UART_IIR 0x02 -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ - -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -#define UART_FCR 0x02 -#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ -#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ -#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ -#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ -#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ - -#define UART_FCR_RXSR 0x02 /* Receiver soft reset */ -#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */ - -#define UART_LCR 0x03 -#define UART_LCR_WLS_MSK 0x03 /* character length select mask */ -#define UART_LCR_WLS_5 0x00 /* 5 bit character length */ -#define UART_LCR_WLS_6 0x01 /* 6 bit character length */ -#define UART_LCR_WLS_7 0x02 /* 7 bit character length */ -#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ -#define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define UART_LCR_PEN 0x08 /* Parity enable */ -#define UART_LCR_EPS 0x10 /* Even Parity Select */ -#define UART_LCR_STKP 0x20 /* Stick Parity */ -#define UART_LCR_SBRK 0x40 /* Set Break */ -#define UART_LCR_BKSE 0x80 /* Bank select enable */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ - -#define UART_MCR 0x04 -#define UART_MCR_DTR 0x01 /* DTR */ -#define UART_MCR_RTS 0x02 /* RTS */ -#define UART_MCR_OUT1 0x04 /* Out 1 */ -#define UART_MCR_OUT2 0x08 /* Out 2 */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ - -#define UART_MCR_DMA_EN 0x04 -#define UART_MCR_TX_DFR 0x08 - -#define UART_DLL 0x00 -#define UART_DLM 0x01 - -/* Status */ -#define UART_LSR 0x05 -#define UART_LSR_DR 0x01 /* Data ready */ -#define UART_LSR_OE 0x02 /* Overrun */ -#define UART_LSR_PE 0x04 /* Parity error */ -#define UART_LSR_FE 0x08 /* Framing error */ -#define UART_LSR_BI 0x10 /* Break */ -#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ -#define UART_LSR_TEMT 0x40 /* Xmitter empty */ -#define UART_LSR_ERR 0x80 /* Error */ - -#define UART_MSR 0x06 -#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -#define UART_MSR_RI 0x40 /* Ring Indicator */ -#define UART_MSR_DSR 0x20 /* Data Set Ready */ -#define UART_MSR_CTS 0x10 /* Clear to Send */ -#define UART_MSR_DDCD 0x08 /* Delta DCD */ -#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define UART_MSR_DDSR 0x02 /* Delta DSR */ -#define UART_MSR_DCTS 0x01 /* Delta CTS */ - -#define UART_SCR 0x07 -#define UART_SPR 0x07 - -#endif /* UART8250_H */ |