diff options
Diffstat (limited to 'src/include/device/dram/ddr3.h')
-rw-r--r-- | src/include/device/dram/ddr3.h | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/src/include/device/dram/ddr3.h b/src/include/device/dram/ddr3.h index 905aa8407a..bc9fca7495 100644 --- a/src/include/device/dram/ddr3.h +++ b/src/include/device/dram/ddr3.h @@ -106,35 +106,35 @@ typedef union dimm_flags_st { struct { /* Indicates if rank 1 of DIMM uses a mirrored pin mapping. See: * Annex K: Serial Presence Detect (SPD) for DDR3 SDRAM */ - unsigned pins_mirrored:1; + unsigned int pins_mirrored:1; /* Module can work at 1.50V - All DIMMS must be 1.5V operable */ - unsigned operable_1_50V:1; + unsigned int operable_1_50V:1; /* Module can work at 1.35V */ - unsigned operable_1_35V:1; + unsigned int operable_1_35V:1; /* Module can work at 1.20V */ - unsigned operable_1_25V:1; + unsigned int operable_1_25V:1; /* Has an 8-bit bus extension, meaning the DIMM supports ECC */ - unsigned is_ecc:1; + unsigned int is_ecc:1; /* DLL-Off Mode Support */ - unsigned dll_off_mode:1; + unsigned int dll_off_mode:1; /* Indicates a drive strength of RZQ/6 (40 Ohm) is supported */ - unsigned rzq6_supported:1; + unsigned int rzq6_supported:1; /* Indicates a drive strength of RZQ/7 (35 Ohm) is supported */ - unsigned rzq7_supported:1; + unsigned int rzq7_supported:1; /* Partial Array Self Refresh */ - unsigned pasr:1; + unsigned int pasr:1; /* On-die Thermal Sensor Readout */ - unsigned odts:1; + unsigned int odts:1; /* Auto Self Refresh */ - unsigned asr:1; + unsigned int asr:1; /* Extended temperature range supported */ - unsigned ext_temp_range:1; + unsigned int ext_temp_range:1; /* Operating at extended temperature requires 2X refresh rate */ - unsigned ext_temp_refresh:1; + unsigned int ext_temp_refresh:1; /* Thermal sensor incorporated */ - unsigned therm_sensor:1; + unsigned int therm_sensor:1; }; - unsigned raw; + unsigned int raw; } dimm_flags_t; /** |