diff options
Diffstat (limited to 'src/ec/google/chromeec/ec_commands.h')
| -rw-r--r-- | src/ec/google/chromeec/ec_commands.h | 465 |
1 files changed, 406 insertions, 59 deletions
diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h index d4992a15bf..afb8925b2e 100644 --- a/src/ec/google/chromeec/ec_commands.h +++ b/src/ec/google/chromeec/ec_commands.h @@ -9,26 +9,12 @@ #define __CROS_EC_COMMANDS_H /* - * Protocol overview + * Current version of this protocol * - * request: CMD [ P0 P1 P2 ... Pn S ] - * response: ERR [ P0 P1 P2 ... Pn S ] - * - * where the bytes are defined as follow : - * - CMD is the command code. (defined by EC_CMD_ constants) - * - ERR is the error code. (defined by EC_RES_ constants) - * - Px is the optional payload. - * it is not sent if the error code is not success. - * (defined by ec_params_ and ec_response_ structures) - * - S is the checksum which is the sum of all payload bytes. - * - * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD - * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM. - * On I2C, all bytes are sent serially in the same message. + * TODO(crosbug.com/p/11223): This is effectively useless; protocol is + * determined in other ways. Remove this once the kernel code no longer + * depends on it. */ - -/* Current version of this protocol */ -/* TODO: This is effectively useless; protocol is determined in other ways */ #define EC_PROTO_VERSION 0x00000002 /* Command version mask */ @@ -43,11 +29,13 @@ #define EC_LPC_ADDR_HOST_CMD 0x204 /* I/O addresses for host command args and params */ -#define EC_LPC_ADDR_HOST_ARGS 0x800 /* and 0x801, 0x802, 0x803 */ -#define EC_LPC_ADDR_HOST_PARAM 0x804 -#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */ -#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ -#define EC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ +/* Protocol version 2 */ +#define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */ +#define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is + * EC_PROTO2_MAX_PARAM_SIZE */ +/* Protocol version 3 */ +#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ +#define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ /* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff * and they tell the kernel that so we have to think of it as two parts. */ @@ -93,6 +81,7 @@ #define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ #define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ #define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ +#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (uint16_t) */ /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ #define EC_TEMP_SENSOR_ENTRIES 16 @@ -102,6 +91,8 @@ * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. */ #define EC_TEMP_SENSOR_B_ENTRIES 8 + +/* Special values for mapped temperature sensors */ #define EC_TEMP_SENSOR_NOT_PRESENT 0xff #define EC_TEMP_SENSOR_ERROR 0xfe #define EC_TEMP_SENSOR_NOT_POWERED 0xfd @@ -112,6 +103,18 @@ */ #define EC_TEMP_SENSOR_OFFSET 200 +/* + * Number of ALS readings at EC_MEMMAP_ALS + */ +#define EC_ALS_ENTRIES 2 + +/* + * The default value a temperature sensor will return when it is present but + * has not been read this boot. This is a reasonable number to avoid + * triggering alarms on the host. + */ +#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET) + #define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ #define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ #define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ @@ -141,9 +144,11 @@ #define EC_HOST_CMD_FLAG_VERSION_3 0x02 /* Wireless switch flags */ -#define EC_WIRELESS_SWITCH_WLAN 0x01 -#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 -#define EC_WIRELESS_SWITCH_WWAN 0x04 +#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */ +#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */ +#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */ +#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */ +#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */ /* * This header file is used in coreboot both in C and ACPI code. The ACPI code @@ -239,10 +244,10 @@ enum host_event_code { /* Shutdown due to battery level too low */ EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, - /* Suggest that the AP throttle itself */ - EC_HOST_EVENT_THROTTLE_START = 18, - /* Suggest that the AP resume normal speed */ - EC_HOST_EVENT_THROTTLE_STOP = 19, + /* Suggest that the AP throttle itself */ + EC_HOST_EVENT_THROTTLE_START = 18, + /* Suggest that the AP resume normal speed */ + EC_HOST_EVENT_THROTTLE_STOP = 19, /* * The high bit of the event mask is not used as a host event code. If @@ -289,6 +294,126 @@ struct ec_lpc_host_args { #define EC_HOST_ARGS_FLAG_TO_HOST 0x02 /*****************************************************************************/ +/* + * Byte codes returned by EC over SPI interface. + * + * These can be used by the AP to debug the EC interface, and to determine + * when the EC is not in a state where it will ever get around to responding + * to the AP. + * + * Example of sequence of bytes read from EC for a current good transfer: + * 1. - - AP asserts chip select (CS#) + * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request + * 3. - - EC starts handling CS# interrupt + * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request + * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in + * bytes looking for EC_SPI_FRAME_START + * 6. - - EC finishes processing and sets up response + * 7. EC_SPI_FRAME_START - AP reads frame byte + * 8. (response packet) - AP reads response packet + * 9. EC_SPI_PAST_END - Any additional bytes read by AP + * 10 - - AP deasserts chip select + * 11 - - EC processes CS# interrupt and sets up DMA for + * next request + * + * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than + * the following byte values: + * EC_SPI_OLD_READY + * EC_SPI_RX_READY + * EC_SPI_RECEIVING + * EC_SPI_PROCESSING + * + * Then the EC found an error in the request, or was not ready for the request + * and lost data. The AP should give up waiting for EC_SPI_FRAME_START, + * because the EC is unable to tell when the AP is done sending its request. + */ + +/* + * Framing byte which precedes a response packet from the EC. After sending a + * request, the AP will clock in bytes until it sees the framing byte, then + * clock in the response packet. + */ +#define EC_SPI_FRAME_START 0xec + +/* + * Padding bytes which are clocked out after the end of a response packet. + */ +#define EC_SPI_PAST_END 0xed + +/* + * EC is ready to receive, and has ignored the byte sent by the AP. EC expects + * that the AP will send a valid packet header (starting with + * EC_COMMAND_PROTOCOL_3) in the next 32 bytes. + */ +#define EC_SPI_RX_READY 0xf8 + +/* + * EC has started receiving the request from the AP, but hasn't started + * processing it yet. + */ +#define EC_SPI_RECEIVING 0xf9 + +/* EC has received the entire request from the AP and is processing it. */ +#define EC_SPI_PROCESSING 0xfa + +/* + * EC received bad data from the AP, such as a packet header with an invalid + * length. EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_RX_BAD_DATA 0xfb + +/* + * EC received data from the AP before it was ready. That is, the AP asserted + * chip select and started clocking data before the EC was ready to receive it. + * EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_NOT_READY 0xfc + +/* + * EC was ready to receive a request from the AP. EC has treated the byte sent + * by the AP as part of a request packet, or (for old-style ECs) is processing + * a fully received packet but is not ready to respond yet. + */ +#define EC_SPI_OLD_READY 0xfd + +/*****************************************************************************/ + +/* + * Protocol version 2 for I2C and SPI send a request this way: + * + * 0 EC_CMD_VERSION0 + (command version) + * 1 Command number + * 2 Length of params = N + * 3..N+2 Params, if any + * N+3 8-bit checksum of bytes 0..N+2 + * + * The corresponding response is: + * + * 0 Result code (EC_RES_*) + * 1 Length of params = M + * 2..M+1 Params, if any + * M+2 8-bit checksum of bytes 0..M+1 + */ +#define EC_PROTO2_REQUEST_HEADER_BYTES 3 +#define EC_PROTO2_REQUEST_TRAILER_BYTES 1 +#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \ + EC_PROTO2_REQUEST_TRAILER_BYTES) + +#define EC_PROTO2_RESPONSE_HEADER_BYTES 2 +#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1 +#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \ + EC_PROTO2_RESPONSE_TRAILER_BYTES) + +/* Parameter length was limited by the LPC interface */ +#define EC_PROTO2_MAX_PARAM_SIZE 0xfc + +/* Maximum request and response packet sizes for protocol version 2 */ +#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) +#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) + +/*****************************************************************************/ /* * Value written to legacy command port / prefix byte to indicate protocol @@ -489,6 +614,68 @@ struct ec_response_get_comms_status { uint32_t flags; /* Mask of enum ec_comms_status */ } __packed; +/* Fake a variety of responses, purely for testing purposes. */ +#define EC_CMD_TEST_PROTOCOL 0x0a + +/* Tell the EC what to send back to us. */ +struct ec_params_test_protocol { + uint32_t ec_result; + uint32_t ret_len; + uint8_t buf[32]; +} __packed; + +/* Here it comes... */ +struct ec_response_test_protocol { + uint8_t buf[32]; +} __packed; + +/* Get prococol information */ +#define EC_CMD_GET_PROTOCOL_INFO 0x0b + +/* Flags for ec_response_get_protocol_info.flags */ +/* EC_RES_IN_PROGRESS may be returned if a command is slow */ +#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0) + +struct ec_response_get_protocol_info { + /* Fields which exist if at least protocol version 3 supported */ + + /* Bitmask of protocol versions supported (1 << n means version n)*/ + uint32_t protocol_versions; + + /* Maximum request packet size, in bytes */ + uint16_t max_request_packet_size; + + /* Maximum response packet size, in bytes */ + uint16_t max_response_packet_size; + + /* Flags; see EC_PROTOCOL_INFO_* */ + uint32_t flags; +} __packed; + + +/*****************************************************************************/ +/* Get/Set miscellaneous values */ + +/* The upper byte of .flags tells what to do (nothing means "get") */ +#define EC_GSV_SET 0x80000000 + +/* The lower three bytes of .flags identifies the parameter, if that has + meaning for an individual command. */ +#define EC_GSV_PARAM_MASK 0x00ffffff + +struct ec_params_get_set_value { + uint32_t flags; + uint32_t value; +} __packed; + +struct ec_response_get_set_value { + uint32_t flags; + uint32_t value; +} __packed; + +/* More than one command can use these structs to get/set paramters. */ +#define EC_CMD_GSV_PAUSE_IN_S5 0x0c + /*****************************************************************************/ /* Flash commands */ @@ -496,6 +683,7 @@ struct ec_response_get_comms_status { /* Get flash info */ #define EC_CMD_FLASH_INFO 0x10 +/* Version 0 returns these fields */ struct ec_response_flash_info { /* Usable flash size, in bytes */ uint32_t flash_size; @@ -516,6 +704,37 @@ struct ec_response_flash_info { uint32_t protect_block_size; } __packed; +/* Flags for version 1+ flash info command */ +/* EC flash erases bits to 0 instead of 1 */ +#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0) + +/* + * Version 1 returns the same initial fields as version 0, with additional + * fields following. + * + * gcc anonymous structs don't seem to get along with the __packed directive; + * if they did we'd define the version 0 struct as a sub-struct of this one. + */ +struct ec_response_flash_info_1 { + /* Version 0 fields; see above for description */ + uint32_t flash_size; + uint32_t write_block_size; + uint32_t erase_block_size; + uint32_t protect_block_size; + + /* Version 1 adds these fields: */ + /* + * Ideal write size in bytes. Writes will be fastest if size is + * exactly this and offset is a multiple of this. For example, an EC + * may have a write buffer which can do half-page operations if data is + * aligned, and a slower word-at-a-time write mode. + */ + uint32_t write_ideal_size; + + /* Flags; see EC_FLASH_INFO_* */ + uint32_t flags; +} __packed; + /* * Read flash * @@ -530,15 +749,15 @@ struct ec_params_flash_read { /* Write flash */ #define EC_CMD_FLASH_WRITE 0x12 +#define EC_VER_FLASH_WRITE 1 + +/* Version 0 of the flash command supported only 64 bytes of data */ +#define EC_FLASH_WRITE_VER0_SIZE 64 struct ec_params_flash_write { uint32_t offset; /* Byte offset to write */ uint32_t size; /* Size to write in bytes */ - /* - * Data to write. Could really use EC_PARAM_SIZE - 8, but tidiest to - * use a power of 2 so writes stay aligned. - */ - uint8_t data[64]; + /* Followed by data to write */ } __packed; /* Erase flash */ @@ -614,7 +833,7 @@ struct ec_response_flash_protect { enum ec_flash_region { /* Region which holds read-only EC image */ - EC_FLASH_REGION_RO, + EC_FLASH_REGION_RO = 0, /* Region which holds rewritable EC image */ EC_FLASH_REGION_RW, /* @@ -622,6 +841,8 @@ enum ec_flash_region { * EC_FLASH_REGION_RO) */ EC_FLASH_REGION_WP_RO, + /* Number of regions */ + EC_FLASH_REGION_COUNT, }; struct ec_params_flash_region_info { @@ -710,15 +931,15 @@ struct rgb_s { */ struct lightbar_params { /* Timing */ - int google_ramp_up; - int google_ramp_down; - int s3s0_ramp_up; - int s0_tick_delay[2]; /* AC=0/1 */ - int s0a_tick_delay[2]; /* AC=0/1 */ - int s0s3_ramp_down; - int s3_sleep_for; - int s3_ramp_up; - int s3_ramp_down; + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; /* Oscillation */ uint8_t new_s0; @@ -747,7 +968,7 @@ struct ec_params_lightbar { union { struct { /* no args */ - } dump, off, on, init, get_seq, get_params; + } dump, off, on, init, get_seq, get_params, version; struct num { uint8_t num; @@ -781,6 +1002,11 @@ struct ec_response_lightbar { struct lightbar_params get_params; + struct version { + uint32_t num; + uint32_t flags; + } version; + struct { /* no return params */ } off, on, init, brightness, seq, reg, rgb, demo, set_params; @@ -801,6 +1027,7 @@ enum lightbar_command { LIGHTBAR_CMD_DEMO = 9, LIGHTBAR_CMD_GET_PARAMS = 10, LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_CMD_VERSION = 12, LIGHTBAR_NUM_CMDS }; @@ -810,9 +1037,17 @@ enum lightbar_command { #define EC_CMD_LED_CONTROL 0x29 enum ec_led_id { + /* LED to indicate battery state of charge */ EC_LED_ID_BATTERY_LED = 0, - EC_LED_ID_POWER_BUTTON_LED, + /* + * LED to indicate system power state (on or in suspend). + * May be on power button or on C-panel. + */ + EC_LED_ID_POWER_LED, + /* LED on power adapter or its plug */ EC_LED_ID_ADAPTER_LED, + + EC_LED_ID_COUNT }; /* LED control flags */ @@ -982,20 +1217,27 @@ struct ec_response_port80_last_boot { } __packed; /*****************************************************************************/ -/* Thermal engine commands */ +/* Thermal engine commands. Note that there are two implementations. We'll + * reuse the command number, but the data and behavior is incompatible. + * Version 0 is what originally shipped on Link. + * Version 1 separates the CPU thermal limits from the fan control. + */ -/* Set threshold value */ #define EC_CMD_THERMAL_SET_THRESHOLD 0x50 +#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 +/* The version 0 structs are opaque. You have to know what they are for + * the get/set commands to make any sense. + */ + +/* Version 0 - set */ struct ec_params_thermal_set_threshold { uint8_t sensor_type; uint8_t threshold_id; uint16_t value; } __packed; -/* Get threshold value */ -#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 - +/* Version 0 - get */ struct ec_params_thermal_get_threshold { uint8_t sensor_type; uint8_t threshold_id; @@ -1005,6 +1247,41 @@ struct ec_response_thermal_get_threshold { uint16_t value; } __packed; + +/* The version 1 structs are visible. */ +enum ec_temp_thresholds { + EC_TEMP_THRESH_WARN = 0, + EC_TEMP_THRESH_HIGH, + EC_TEMP_THRESH_HALT, + + EC_TEMP_THRESH_COUNT +}; + +/* Thermal configuration for one temperature sensor. Temps are in degrees K. + * Zero values will be silently ignored by the thermal task. + */ +struct ec_thermal_config { + uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */ + uint32_t temp_fan_off; /* no active cooling needed */ + uint32_t temp_fan_max; /* max active cooling needed */ +} __packed; + +/* Version 1 - get config for one sensor. */ +struct ec_params_thermal_get_threshold_v1 { + uint32_t sensor_num; +} __packed; +/* This returns a struct ec_thermal_config */ + +/* Version 1 - set config for one sensor. + * Use read-modify-write for best results! */ +struct ec_params_thermal_set_threshold_v1 { + uint32_t sensor_num; + struct ec_thermal_config cfg; +} __packed; +/* This returns no data */ + +/****************************************************************************/ + /* Toggle automatic fan control */ #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 @@ -1261,6 +1538,11 @@ struct ec_response_gpio_get { /*****************************************************************************/ /* I2C commands. Only available when flash write protect is unlocked. */ +/* + * TODO(crosbug.com/p/23570): These commands are deprecated, and will be + * removed soon. Use EC_CMD_I2C_XFER instead. + */ + /* Read I2C bus */ #define EC_CMD_I2C_READ 0x94 @@ -1288,11 +1570,20 @@ struct ec_params_i2c_write { /*****************************************************************************/ /* Charge state commands. Only available when flash write protect unlocked. */ -/* Force charge state machine to stop in idle mode */ -#define EC_CMD_CHARGE_FORCE_IDLE 0x96 +/* Force charge state machine to stop charging the battery or force it to + * discharge the battery. + */ +#define EC_CMD_CHARGE_CONTROL 0x96 +#define EC_VER_CHARGE_CONTROL 1 -struct ec_params_force_idle { - uint8_t enabled; +enum ec_charge_control_mode { + CHARGE_CONTROL_NORMAL = 0, + CHARGE_CONTROL_IDLE, + CHARGE_CONTROL_DISCHARGE, +}; + +struct ec_params_charge_control { + uint32_t mode; /* enum charge_control_mode */ } __packed; /*****************************************************************************/ @@ -1418,7 +1709,7 @@ struct ec_response_i2c_passthru { /*****************************************************************************/ -/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */ +/* Debug commands for battery charging */ /* * Dump charge state machine context. @@ -1484,8 +1775,8 @@ struct ec_params_sb_wr_block { /* System commands */ /* - * TODO: this is a confusing name, since it doesn't necessarily reboot the EC. - * Rename to "set image" or something similar. + * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't + * necessarily reboot the EC. Rename to "image" or something similar? */ #define EC_CMD_REBOOT_EC 0xd2 @@ -1564,6 +1855,7 @@ struct ec_params_reboot_ec { #define EC_CMD_ACPI_QUERY_EVENT 0x84 /* Valid addresses in ACPI memory space, for read/write commands */ + /* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ #define EC_ACPI_MEM_VERSION 0x00 /* @@ -1573,8 +1865,52 @@ struct ec_params_reboot_ec { #define EC_ACPI_MEM_TEST 0x01 /* Test compliment; writes here are ignored. */ #define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 + /* Keyboard backlight brightness percent (0 - 100) */ #define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 +/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ +#define EC_ACPI_MEM_FAN_DUTY 0x04 + +/* + * DPTF temp thresholds. Any of the EC's temp sensors can have up to two + * independent thresholds attached to them. The current value of the ID + * register determines which sensor is affected by the THRESHOLD and COMMIT + * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme + * as the memory-mapped sensors. The COMMIT register applies those settings. + * + * The spec does not mandate any way to read back the threshold settings + * themselves, but when a threshold is crossed the AP needs a way to determine + * which sensor(s) are responsible. Each reading of the ID register clears and + * returns one sensor ID that has crossed one of its threshold (in either + * direction) since the last read. A value of 0xFF means "no new thresholds + * have tripped". Setting or enabling the thresholds for a sensor will clear + * the unread event count for that sensor. + */ +#define EC_ACPI_MEM_TEMP_ID 0x05 +#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 +#define EC_ACPI_MEM_TEMP_COMMIT 0x07 +/* + * Here are the bits for the COMMIT register: + * bit 0 selects the threshold index for the chosen sensor (0/1) + * bit 1 enables/disables the selected threshold (0 = off, 1 = on) + * Each write to the commit register affects one threshold. + */ +#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0) +#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1) +/* + * Example: + * + * Set the thresholds for sensor 2 to 50 C and 60 C: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET + * write 0x2 to [0x07] -- enable threshold 0 with this value + * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET + * write 0x3 to [0x07] -- enable threshold 1 with this value + * + * Disable the 60 C threshold, leaving the 50 C threshold unchanged: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x1 to [0x07] -- disable threshold 1 + */ /* Current version of ACPI memory address space */ #define EC_ACPI_MEM_VERSION_CURRENT 1 @@ -1622,4 +1958,15 @@ struct ec_params_reboot_ec { #endif /* !__ACPI__ */ +/*****************************************************************************/ +/* + * Deprecated constants. These constants have been renamed for clarity. The + * meaning and size has not changed. Programs that use the old names should + * switch to the new names soon, as the old names may not be carried forward + * forever. + */ +#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE +#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1 +#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE + #endif /* __CROS_EC_COMMANDS_H */ |