diff options
Diffstat (limited to 'src/drivers')
| -rw-r--r-- | src/drivers/Kconfig | 1 | ||||
| -rw-r--r-- | src/drivers/intel/Kconfig | 20 | ||||
| -rw-r--r-- | src/drivers/intel/gma/Kconfig | 24 | ||||
| -rw-r--r-- | src/drivers/intel/gma/Makefile.inc | 21 | ||||
| -rw-r--r-- | src/drivers/intel/gma/drm_dp_helper.c | 119 | ||||
| -rw-r--r-- | src/drivers/intel/gma/drm_dp_helper.h | 239 | ||||
| -rw-r--r-- | src/drivers/intel/gma/i915.h | 180 | ||||
| -rw-r--r-- | src/drivers/intel/gma/intel_dp.c | 1707 |
8 files changed, 2311 insertions, 0 deletions
diff --git a/src/drivers/Kconfig b/src/drivers/Kconfig index c4378b1b1b..b187419986 100644 --- a/src/drivers/Kconfig +++ b/src/drivers/Kconfig @@ -24,6 +24,7 @@ source src/drivers/emulation/Kconfig source src/drivers/generic/Kconfig source src/drivers/i2c/Kconfig source src/drivers/ics/Kconfig +source src/drivers/intel/Kconfig source src/drivers/ipmi/Kconfig source src/drivers/maxim/Kconfig source src/drivers/oxford/Kconfig diff --git a/src/drivers/intel/Kconfig b/src/drivers/intel/Kconfig new file mode 100644 index 0000000000..9954f31e03 --- /dev/null +++ b/src/drivers/intel/Kconfig @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +source src/drivers/intel/gma/Kconfig diff --git a/src/drivers/intel/gma/Kconfig b/src/drivers/intel/gma/Kconfig new file mode 100644 index 0000000000..1a4212bd49 --- /dev/null +++ b/src/drivers/intel/gma/Kconfig @@ -0,0 +1,24 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config INTEL_DP + bool + default n + help + helper functions for intel display port operations diff --git a/src/drivers/intel/gma/Makefile.inc b/src/drivers/intel/gma/Makefile.inc new file mode 100644 index 0000000000..c90daa4f37 --- /dev/null +++ b/src/drivers/intel/gma/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-$(CONFIG_INTEL_DP) += intel_dp.c drm_dp_helper.c + diff --git a/src/drivers/intel/gma/drm_dp_helper.c b/src/drivers/intel/gma/drm_dp_helper.c new file mode 100644 index 0000000000..66072263f4 --- /dev/null +++ b/src/drivers/intel/gma/drm_dp_helper.c @@ -0,0 +1,119 @@ +/* + * Copyright 2013 Google Inc. + * Copyright © 2009 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <console/console.h> +#include <stdint.h> +#include <delay.h> +#include <drivers/intel/gma/i915.h> +#include <string.h> + +#include <edid.h> + +/* reduced a lot for coreboot. */ +/** + * DOC: dp helpers + * + * These functions contain some common logic and helpers at various + * abstraction levels to deal with Display Port sink devices and + * related things like DP aux channel transfers, EDID reading over DP + * aux channels, decoding certain DPCD blocks, ... + */ + + +/* Helpers for DP link training */ +static u8 dp_link_status(u8 link_status[DP_LINK_STATUS_SIZE], int r) +{ + printk(BIOS_SPEW, "%s: %d, %d, %d\n", __func__, + r, r - DP_LANE0_1_STATUS, + link_status[r - DP_LANE0_1_STATUS]); + return link_status[r - DP_LANE0_1_STATUS]; +} + +static u8 dp_get_lane_status(u8 link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_LANE0_1_STATUS + (lane >> 1); + int s = (lane & 1) * 4; + u8 l = dp_link_status(link_status, i); + return (l >> s) & 0xf; +} + +int drm_dp_channel_eq_ok(u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count) +{ + u8 lane_align; + u8 lane_status; + int lane; + + lane_align = dp_link_status(link_status, + DP_LANE_ALIGN_STATUS_UPDATED); + if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) + return 0; + for (lane = 0; lane < lane_count; lane++) { + lane_status = dp_get_lane_status(link_status, lane); + if ((lane_status & DP_CHANNEL_EQ_BITS) != DP_CHANNEL_EQ_BITS) + return 0; + } + return 1; +} + +int drm_dp_clock_recovery_ok(u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count) +{ + int lane; + u8 lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = dp_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return 0; + } + return 1; +} + +u8 drm_dp_get_adjust_request_voltage(u8 link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : + DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); + u8 l = dp_link_status(link_status, i); + + printk(BIOS_SPEW, "%s: i %d s %d l %d return %d\n", + __func__, i, s, l, + ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT); + return ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; +} + +u8 drm_dp_get_adjust_request_pre_emphasis(u8 link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); + u8 l = dp_link_status(link_status, i); + + return ((l >> s) & 0x3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; +} diff --git a/src/drivers/intel/gma/drm_dp_helper.h b/src/drivers/intel/gma/drm_dp_helper.h new file mode 100644 index 0000000000..f2e06c33f3 --- /dev/null +++ b/src/drivers/intel/gma/drm_dp_helper.h @@ -0,0 +1,239 @@ +/* + * Copyright 2013 Google Inc. + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _DRM_DP_HELPER_H_ +#define _DRM_DP_HELPER_H_ + +/* From the VESA DisplayPort spec */ + +#define AUX_NATIVE_WRITE 0x8 +#define AUX_NATIVE_READ 0x9 +#define AUX_I2C_WRITE 0x0 +#define AUX_I2C_READ 0x1 +#define AUX_I2C_STATUS 0x2 +#define AUX_I2C_MOT 0x4 + +#define AUX_NATIVE_REPLY_ACK (0x0 << 4) +#define AUX_NATIVE_REPLY_NACK (0x1 << 4) +#define AUX_NATIVE_REPLY_DEFER (0x2 << 4) +#define AUX_NATIVE_REPLY_MASK (0x3 << 4) + +#define AUX_I2C_REPLY_ACK (0x0 << 6) +#define AUX_I2C_REPLY_NACK (0x1 << 6) +#define AUX_I2C_REPLY_DEFER (0x2 << 6) +#define AUX_I2C_REPLY_MASK (0x3 << 6) + +/* AUX CH addresses */ +/* DPCD */ +#define DP_DPCD_REV 0x000 + +#define DP_MAX_LINK_RATE 0x001 + +#define DP_MAX_LANE_COUNT 0x002 +# define DP_MAX_LANE_COUNT_MASK 0x1f +# define DP_TPS3_SUPPORTED (1 << 6) +# define DP_ENHANCED_FRAME_CAP (1 << 7) + +#define DP_MAX_DOWNSPREAD 0x003 +# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6) + +#define DP_NORP 0x004 + +#define DP_DOWNSTREAMPORT_PRESENT 0x005 +# define DP_DWN_STRM_PORT_PRESENT (1 << 0) +# define DP_DWN_STRM_PORT_TYPE_MASK 0x06 +/* 00b = DisplayPort */ +/* 01b = Analog */ +/* 10b = TMDS or HDMI */ +/* 11b = Other */ +# define DP_FORMAT_CONVERSION (1 << 3) + +#define DP_MAIN_LINK_CHANNEL_CODING 0x006 + +#define DP_EDP_CONFIGURATION_CAP 0x00d +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e + +#define DP_PSR_SUPPORT 0x070 +# define DP_PSR_IS_SUPPORTED 1 +#define DP_PSR_CAPS 0x071 +# define DP_PSR_NO_TRAIN_ON_EXIT 1 +# define DP_PSR_SETUP_TIME_330 (0 << 1) +# define DP_PSR_SETUP_TIME_275 (1 << 1) +# define DP_PSR_SETUP_TIME_220 (2 << 1) +# define DP_PSR_SETUP_TIME_165 (3 << 1) +# define DP_PSR_SETUP_TIME_110 (4 << 1) +# define DP_PSR_SETUP_TIME_55 (5 << 1) +# define DP_PSR_SETUP_TIME_0 (6 << 1) +# define DP_PSR_SETUP_TIME_MASK (7 << 1) +# define DP_PSR_SETUP_TIME_SHIFT 1 + +/* link configuration */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a +# define DP_LINK_BW_5_4 0x14 + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_3 3 +# define DP_TRAINING_PATTERN_MASK 0x3 + +# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3) +# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3) +# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3) +# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) + +#define DP_PSR_EN_CFG 0x170 +# define DP_PSR_ENABLE (1 << 0) +# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1) +# define DP_PSR_CRC_VERIFICATION (1 << 2) +# define DP_PSR_FRAME_CAPTURE (1 << 3) + +#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201 +# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0) +# define DP_AUTOMATED_TEST_REQUEST (1 << 1) +# define DP_CP_IRQ (1 << 2) +# define DP_SINK_SPECIFIC_IRQ (1 << 6) + +#define DP_EDP_CONFIGURATION_SET 0x10a + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \ + DP_LANE_CHANNEL_EQ_DONE | \ + DP_LANE_SYMBOL_LOCKED) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 + +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 + +#define DP_RECEIVE_PORT_0_STATUS (1 << 0) +#define DP_RECEIVE_PORT_1_STATUS (1 << 1) + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +#define DP_TEST_REQUEST 0x218 +# define DP_TEST_LINK_TRAINING (1 << 0) +# define DP_TEST_LINK_PATTERN (1 << 1) +# define DP_TEST_LINK_EDID_READ (1 << 2) +# define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */ + +#define DP_TEST_LINK_RATE 0x219 +# define DP_LINK_RATE_162 (0x6) +# define DP_LINK_RATE_27 (0xa) + +#define DP_TEST_LANE_COUNT 0x220 + +#define DP_TEST_PATTERN 0x221 + +#define DP_TEST_RESPONSE 0x260 +# define DP_TEST_ACK (1 << 0) +# define DP_TEST_NAK (1 << 1) +# define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2) + +#define DP_SET_POWER 0x600 +# define DP_SET_POWER_D0 0x1 +# define DP_SET_POWER_D3 0x2 + +#define DP_PSR_ERROR_STATUS 0x2006 +# define DP_PSR_LINK_CRC_ERROR (1 << 0) +# define DP_PSR_RFB_STORAGE_ERROR (1 << 1) + +#define DP_PSR_ESI 0x2007 +# define DP_PSR_CAPS_CHANGE (1 << 0) + +#define DP_PSR_STATUS 0x2008 +# define DP_PSR_SINK_INACTIVE 0 +# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1 +# define DP_PSR_SINK_ACTIVE_RFB 2 +# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3 +# define DP_PSR_SINK_ACTIVE_RESYNC 4 +# define DP_PSR_SINK_INTERNAL_ERROR 7 +# define DP_PSR_SINK_STATE_MASK 0x07 + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +#endif /* _DRM_DP_HELPER_H_ */ diff --git a/src/drivers/intel/gma/i915.h b/src/drivers/intel/gma/i915.h new file mode 100644 index 0000000000..37570649f9 --- /dev/null +++ b/src/drivers/intel/gma/i915.h @@ -0,0 +1,180 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <drivers/intel/gma/i915_reg.h> +#include <drivers/intel/gma/drm_dp_helper.h> +#include <edid.h> + +/* port types. We stick with the same defines as the kernel */ +#define INTEL_OUTPUT_UNUSED 0 +#define INTEL_OUTPUT_ANALOG 1 +#define INTEL_OUTPUT_DVO 2 +#define INTEL_OUTPUT_SDVO 3 +#define INTEL_OUTPUT_LVDS 4 +#define INTEL_OUTPUT_TVOUT 5 +#define INTEL_OUTPUT_HDMI 6 +#define INTEL_OUTPUT_DISPLAYPORT 7 +#define INTEL_OUTPUT_EDP 8 + +/* things that are, strangely, not defined anywhere? */ +#define PCH_PP_UNLOCK 0xabcd0000 +#define WMx_LP_SR_EN (1<<31) +#define PRB0_TAIL 0x02030 +#define PRB0_HEAD 0x02034 +#define PRB0_START 0x02038 +#define PRB0_CTL 0x0203c + +/* debug enums. These are for printks that, due to their place in the + * middle of graphics device IO, might change timing. Use with care + * or not at all. + */ +enum { + vio = 2, /* dump every IO */ + vspin = 4, /* print # of times we spun on a register value */ +}; + +/* The mainboard must provide these functions. */ +unsigned long io_i915_read32(unsigned long addr); +void io_i915_write32(unsigned long val, unsigned long addr); + +/* + * To communicate to and control the extracted-from-kernel code, + * we need this struct. It has a counterpart in the ARM code, so + * there is a precedent. + */ + +#define DP_RECEIVER_CAP_SIZE 0xf +#define DP_LINK_STATUS_SIZE 6 +#define DP_LINK_CHECK_TIMEOUT (10 * 1000) + +#define DP_LINK_CONFIGURATION_SIZE 9 + +struct intel_dp { + int gen; // 6 for link, 7 for wtm2 + int has_pch_split; // 1 for link and wtm2 + int has_pch_cpt; // 1 for everything we know about. + int is_haswell; + /* output register offset in MMIO space. Usually DP_A */ + u32 output_reg; + /* The initial value of the DP register. + * Mainboards can set this to a non-zero + * value in the case that there are undetectable + * but essential parameters. + */ + u32 DP; + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; + u32 color_range; + /* these paramaters are determined after reading the DPCD */ + int dpms_mode; + uint8_t link_bw; + uint8_t lane_count; + /* This data is read from the panel via the AUX channel.*/ + uint8_t dpcd[DP_RECEIVER_CAP_SIZE]; + int type; + int edp; + int is_pch_edp; + /* state related to training. */ + uint8_t train_set[4]; + /* Determined from EDID or coreboot hard-sets. */ + int panel_power_up_delay; + int panel_power_down_delay; + int panel_power_cycle_delay; + int backlight_on_delay; + int backlight_off_delay; + int want_panel_vdd; + u32 clock; + int port; + int pipe; + int bpp; + /* i2c on aux is ... interesting. + * Before you do an i2c cycle, you need to set the address. + * This requires we remember it from one moment to the next. + * Remember it here. + */ + u16 address; + /* timing parameters for aux channel IO. They used to compute these on + * each and every entry to the functions, which is kind of stupid, and it had + * errors anyway. + * note: you can get these from watching YABEL output. E.g.: + * you see an outb of 0x802300e1 to 64010. the 3 is the precharge + * and the e1 is the clock divider. + */ + u32 aux_clock_divider; + u32 precharge; + /* EDID, raw and processed */ + u8 rawedid[256]; + int edidlen; + struct edid edid; + /* computed values needed for "i915" registers */ + int bytes_per_pixel; + u32 htotal; + u32 hblank; + u32 hsync; + u32 vtotal; + u32 vblank; + u32 vsync; + u32 pfa_sz; + u32 pfa_pos; + u32 pfa_ctl; + u32 pipesrc; + u32 stride; +}; + +/* we may yet need these. */ +void intel_dp_mode_set(struct intel_dp *intel_dp); +void intel_dp_start_link_train(struct intel_dp *intel_dp); +void intel_dp_complete_link_train(struct intel_dp *intel_dp); +void intel_dp_link_down(struct intel_dp *intel_dp); + +int intel_dp_i2c_init(struct intel_dp *intel_dp); +int intel_dp_i2c_aux_ch(struct intel_dp *intel_dp, + int mode, uint8_t write_byte, uint8_t *read_byte); +void +intel_dp_dpms(struct intel_dp *intel_dp, int mode); + +int intel_dp_get_dpcd(struct intel_dp *intel_dp); +struct edid *intel_dp_get_edid(struct intel_dp *intel_dp); + +void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode); +void ironlake_edp_pll_on(void); +void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp); +void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, int sync); +int intel_dp_get_max_downspread(struct intel_dp *intel_dp, u8 *max_downspread); +void ironlake_edp_panel_on(struct intel_dp *intel_dp); +void ironlake_edp_backlight_on(struct intel_dp *intel_dp); +/* needed only on haswell. */ +void intel_prepare_ddi_buffers(int port, int use_fdi_mode); +void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp, int port); +int intel_dp_aux_ch(struct intel_dp *intel_dp, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size); +void unpack_aux(u32 src, uint8_t *dst, int dst_bytes); + + +/* drm_dp_helper.c */ +int drm_dp_channel_eq_ok(u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +int drm_dp_clock_recovery_ok(u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +u8 drm_dp_get_adjust_request_voltage(u8 link_status[DP_LINK_STATUS_SIZE], + int lane); +u8 drm_dp_get_adjust_request_pre_emphasis(u8 link_status[DP_LINK_STATUS_SIZE], + int lane); + + diff --git a/src/drivers/intel/gma/intel_dp.c b/src/drivers/intel/gma/intel_dp.c new file mode 100644 index 0000000000..4b5f7c49c1 --- /dev/null +++ b/src/drivers/intel/gma/intel_dp.c @@ -0,0 +1,1707 @@ +/* + * Copyright 2013 Google Inc. + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard <keithp@keithp.com> + * + */ + +/* This code was created by the coccinnelle filters in the i915tool, + * with some final hand filtering. + */ + +#include <console/console.h> +#include <stdint.h> +#include <delay.h> +#include <drivers/intel/gma/i915.h> +#include <string.h> + +/** + * is_edp - is the given port attached to an eDP panel (either CPU or PCH) + * @intel_dp: DP struct + * + * If a CPU or PCH DP output is attached to an eDP panel, this function + * will return 1, and 0 otherwise. + */ +static int is_edp(struct intel_dp *intel_dp) +{ + return intel_dp->type == INTEL_OUTPUT_EDP; +} + +/** + * is_pch_edp - is the port on the PCH and attached to an eDP panel? + * @intel_dp: DP struct + * + * Returns 1 if the given DP struct corresponds to a PCH DP port attached + * to an eDP panel, 0 otherwise. Helpful for determining whether we + * may need FDI resources for a given DP output or not. + */ +static int is_pch_edp(struct intel_dp *intel_dp) +{ + return intel_dp->is_pch_edp; +} + +/** + * is_cpu_edp - is the port on the CPU and attached to an eDP panel? + * @intel_dp: DP struct + * + * Returns 1 if the given DP struct corresponds to a CPU eDP port. + */ +static int is_cpu_edp(struct intel_dp *intel_dp) +{ + return is_edp(intel_dp) && !is_pch_edp(intel_dp); +} + +static uint32_t +pack_aux(uint8_t *src, int src_bytes) +{ + int i; + uint32_t v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((uint32_t) src[i]) << ((3-i) * 8); + return v; +} + +void +unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) +{ + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +static int ironlake_edp_have_panel_power(struct intel_dp *intel_dp) +{ + + return (io_i915_read32(PCH_PP_STATUS) & PP_ON) != 0; +} + +static int ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp) +{ + return (io_i915_read32(PCH_PP_CONTROL) & EDP_FORCE_VDD) != 0; +} + +int +intel_dp_aux_ch(struct intel_dp *intel_dp, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size) +{ + uint32_t output_reg = intel_dp->output_reg; + uint32_t ch_ctl = output_reg + 0x10; + uint32_t ch_data = ch_ctl + 4; + int i; + int recv_bytes; + uint32_t status; + int try; + + /* Try to wait for any previous AUX channel activity */ + for (try = 0; try < 3; try++) { + status = io_i915_read32(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + mdelay(1); + } + + if (try == 3) { + if (1) { + status = io_i915_read32(ch_ctl); + printk(BIOS_ERR, + "dp_aux_ch not started status 0x%08x\n", + status); + } + return -1; + } + + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4){ + u32 val, addr; + val = pack_aux(send + i, send_bytes - i); + addr = ch_data + i; + io_i915_write32(val, addr); + } + + /* Send the command and wait for it to complete */ + io_i915_write32(DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_400us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (intel_dp->precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (intel_dp->aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR, ch_ctl); + for (;;) { + status = io_i915_read32(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + udelay(100); + } + + /* Clear done status and any errors */ + io_i915_write32(status | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR, ch_ctl); + + if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR)) + continue; + if (status & DP_AUX_CH_CTL_DONE) + break; + } + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + printk(BIOS_ERR, "dp_aux_ch not done status 0x%08x\n", status); + return -1; + } + + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + printk(BIOS_ERR, + "dp_aux_ch receive error status 0x%08x\n", status); + return -1; + } + + /* Timeouts occur when the device isn't connected, so they're + * "normal" -- don't fill the kernel log with these */ + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { + printk(BIOS_ERR, "dp_aux_ch timeout status 0x%08x\n", status); + return -1; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) + unpack_aux(io_i915_read32(ch_data + i), + recv + i, recv_bytes - i); + + return recv_bytes; +} + +/* Write data to the aux channel in native mode */ +static int +intel_dp_aux_native_write(struct intel_dp *intel_dp, + uint16_t address, uint8_t *send, int send_bytes) +{ + int ret; + uint8_t msg[20]; + int msg_bytes; + uint8_t ack; + + if (send_bytes > 16) + return -1; + msg[0] = AUX_NATIVE_WRITE << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = send_bytes - 1; + memcpy(&msg[4], send, send_bytes); + msg_bytes = send_bytes + 4; + for (;;) { + ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, &ack, 1); + if (ret < 0) + return ret; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) + break; + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -1; + } + return send_bytes; +} + +/* Write a single byte to the aux channel in native mode */ +static int +intel_dp_aux_native_write_1(struct intel_dp *intel_dp, + uint16_t address, uint8_t byte) +{ + return intel_dp_aux_native_write(intel_dp, address, &byte, 1); +} + +/* read bytes from a native aux channel */ +static int +intel_dp_aux_native_read(struct intel_dp *intel_dp, + uint16_t address, uint8_t *recv, int recv_bytes) +{ + uint8_t msg[4]; + int msg_bytes; + uint8_t reply[20]; + int reply_bytes; + uint8_t ack; + int ret; + + msg[0] = AUX_NATIVE_READ << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = recv_bytes - 1; + + msg_bytes = 4; + reply_bytes = recv_bytes + 1; + + for (;;) { + ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, + reply, reply_bytes); + if (ret == 0) + return -1; + if (ret < 0) + return ret; + ack = reply[0]; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { + memcpy(recv, reply + 1, ret - 1); + return ret - 1; + } + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -1; + } +} + +int +intel_dp_i2c_aux_ch(struct intel_dp *intel_dp, + int mode, uint8_t write_byte, uint8_t *read_byte) +{ + uint8_t msg[5]; + uint8_t reply[2]; + unsigned retry; + int msg_bytes; + int reply_bytes; + int ret; + + /* Set up the command byte */ + if (mode & MODE_I2C_READ) + msg[0] = AUX_I2C_READ << 4; + else + msg[0] = AUX_I2C_WRITE << 4; + + if (!(mode & MODE_I2C_STOP)) + msg[0] |= AUX_I2C_MOT << 4; + + msg[1] = intel_dp->address >> 8; + msg[2] = intel_dp->address; + + switch (mode) { + case MODE_I2C_WRITE: + msg[3] = 0; + msg[4] = write_byte; + msg_bytes = 5; + reply_bytes = 1; + break; + case MODE_I2C_READ: + msg[3] = 0; + msg_bytes = 4; + reply_bytes = 2; + break; + default: + msg_bytes = 3; + reply_bytes = 1; + break; + } + + for (retry = 0; retry < 5; retry++) { + ret = intel_dp_aux_ch(intel_dp, + msg, msg_bytes, + reply, reply_bytes); + if (ret < 0) { + printk(BIOS_ERR, "aux_ch failed %d\n", ret); + return ret; + } + + switch (reply[0] & AUX_NATIVE_REPLY_MASK) { + case AUX_NATIVE_REPLY_ACK: + /* I2C-over-AUX Reply field is only valid + * when paired with AUX ACK. + */ + break; + case AUX_NATIVE_REPLY_NACK: + printk(BIOS_ERR, "aux_ch native nack\n"); + return -1; + case AUX_NATIVE_REPLY_DEFER: + udelay(100); + continue; + default: + printk(BIOS_ERR, "aux_ch invalid native reply 0x%02x\n", + reply[0]); + return -1; + } + + switch (reply[0] & AUX_I2C_REPLY_MASK) { + case AUX_I2C_REPLY_ACK: + if (mode == MODE_I2C_READ) { + *read_byte = reply[1]; + } + return reply_bytes - 1; + case AUX_I2C_REPLY_NACK: + printk(BIOS_ERR, "aux_i2c nack\n"); + return -1; + case AUX_I2C_REPLY_DEFER: + printk(BIOS_ERR, "aux_i2c defer\n"); + udelay(100); + break; + default: + printk(BIOS_ERR, + "aux_i2c invalid reply 0x%02x\n", reply[0]); + return -1; + } + } + + printk(BIOS_ERR, "too many retries, giving up\n"); + return -1; +} + +int +intel_dp_i2c_init(struct intel_dp *intel_dp) +{ + int ret = 0; + + /* not clear what we need to do here, if anything. + * this function was more about setting up the kernel. + * it's a handy placeholder, so we leave it in for now. + */ + return ret; +} + +struct intel_dp_m_n { + uint32_t tu; + uint32_t gmch_m; + uint32_t gmch_n; + uint32_t link_m; + uint32_t link_n; +}; + +static void +intel_reduce_ratio(uint32_t *num, uint32_t *den) +{ + while (*num > 0xffffff || *den > 0xffffff) { + *num >>= 1; + *den >>= 1; + } +} + +static void +intel_dp_compute_m_n(int bpp, + int nlanes, + int pixel_clock, + int link_clock, + struct intel_dp_m_n *m_n) +{ + m_n->tu = 64; + m_n->gmch_m = (pixel_clock * bpp) >> 3; + m_n->gmch_n = link_clock * nlanes; + intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; + intel_reduce_ratio(&m_n->link_m, &m_n->link_n); +} + +/* not sure. */ +void intel_dp_set_m_n(struct intel_dp *intel_dp); + +void +intel_dp_set_m_n(struct intel_dp *intel_dp) +{ + int lane_count; + struct intel_dp_m_n m_n; + int pipe = intel_dp->pipe; + + lane_count = intel_dp->lane_count; + + /* + * Compute the GMCH and Link ratios. The '3' here is + * the number of bytes_per_pixel post-LUT, which we always + * set up for 8-bits of R/G/B, or 3 bytes total. + */ + intel_dp_compute_m_n(intel_dp->bpp, lane_count, + intel_dp->clock, intel_dp->clock, &m_n); + + { + io_i915_write32(( + (m_n.tu - 1) << + PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m, TRANSDATA_M1(pipe)); + io_i915_write32(m_n.gmch_n, TRANSDATA_N1(pipe)); + io_i915_write32(m_n.link_m, TRANSDPLINK_M1(pipe)); + io_i915_write32(m_n.link_n, TRANSDPLINK_N1(pipe)); + } +} + +static void ironlake_edp_pll_off(void); + +void +intel_dp_mode_set(struct intel_dp *intel_dp) +{ + /* Turn on the eDP PLL if needed */ + if (is_edp(intel_dp)) { + if (!is_pch_edp(intel_dp)) + ironlake_edp_pll_on(); + else + ironlake_edp_pll_off(); + } + + /* + * There are four kinds of DP registers: + * + * IBX PCH + * SNB CPU + * IVB CPU + * CPT PCH + * + * IBX PCH and CPU are the same for almost everything, + * except that the CPU DP PLL is configured in this + * register + * + * CPT PCH is quite different, having many bits moved + * to the TRANS_DP_CTL register instead. That + * configuration happens (oddly) in ironlake_pch_enable + */ + + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + intel_dp->DP = io_i915_read32(intel_dp->output_reg) & DP_DETECTED; + printk(BIOS_SPEW, "%s: initial value is %08lx\n", __func__, + (unsigned long)intel_dp->DP); + /* | 0 essentially */ + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; + + /* Handle DP bits in common between all three register formats */ + + switch (intel_dp->lane_count) { + case 1: + intel_dp->DP |= DP_PORT_WIDTH_1; + break; + case 2: + intel_dp->DP |= DP_PORT_WIDTH_2; + break; + case 4: + intel_dp->DP |= DP_PORT_WIDTH_4; + break; + } + memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); + intel_dp->link_configuration[0] = intel_dp->link_bw; + intel_dp->link_configuration[1] = intel_dp->lane_count; + intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B; + /* + * Check for DPCD version > 1.1 and enhanced framing support + */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { + intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + } + + /* Split out the IBX/CPU vs CPT settings */ + + if (is_cpu_edp(intel_dp) && (intel_dp->gen == 7)) { + /* what are these? We're not sure. + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + */ + intel_dp->DP |= DP_SYNC_VS_HIGH; + /* */ + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; + + if (intel_dp->link_configuration[1] & + DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + intel_dp->DP |= intel_dp->pipe << 29; + + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (intel_dp->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } else if (!intel_dp->has_pch_cpt || is_cpu_edp(intel_dp)) { + intel_dp->DP |= intel_dp->color_range; + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + if (intel_dp->link_configuration[1] & + DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + if (intel_dp->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + + if (is_cpu_edp(intel_dp)) { + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (intel_dp->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } + } else { + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; + } +} + +#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_ON_VALUE (PP_ON | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) + +#define IDLE_OFF_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_OFF_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +#define IDLE_CYCLE_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) +#define IDLE_CYCLE_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +static void ironlake_wait_panel_status(struct intel_dp *intel_dp, + u32 mask, + u32 value) +{ + int i; + u32 status; + printk(BIOS_ERR, "[000000.0] [drm:%s], ", __func__); + printk(BIOS_ERR, "mask %08lx value %08lx status %08lx control %08lx\n", + (unsigned long) mask, (unsigned long) value, + (unsigned long)io_i915_read32(PCH_PP_STATUS), + (unsigned long)io_i915_read32(PCH_PP_CONTROL)); + + for(i = 0, status = io_i915_read32(PCH_PP_STATUS); ((status & mask) != value) && (i < 5000); + status = io_i915_read32(PCH_PP_STATUS)){ + udelay(10); + } + if (i > 5000){ + printk(BIOS_ERR, + "Panel status timeout: status %08lx control %08lx\n", + (unsigned long)io_i915_read32(PCH_PP_STATUS), + (unsigned long)io_i915_read32(PCH_PP_CONTROL)); + } +} + +static void ironlake_wait_panel_on(struct intel_dp *intel_dp) +{ + printk(BIOS_ERR, "Wait for panel power on\n"); + ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); +} + +static void ironlake_wait_panel_off(struct intel_dp *intel_dp) +{ + printk(BIOS_ERR, "Wait for panel power off time\n"); + ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); +} + +static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp) +{ + printk(BIOS_ERR, "Wait for panel power cycle\n"); + ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); +} + + +/* Read the current pp_control value, unlocking the register if it + * is locked + */ + +static u32 ironlake_get_pp_control(void) +{ + u32 control = io_i915_read32(PCH_PP_CONTROL); + + control &= ~PANEL_UNLOCK_MASK; + control |= PANEL_UNLOCK_REGS; + return control; +} + +void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) +{ + u32 pp; + + if (!is_edp(intel_dp)) + return; + printk(BIOS_ERR, "Turn eDP VDD on\n"); + + if (intel_dp->want_panel_vdd) { + printk(BIOS_ERR, "eDP VDD already requested on\n"); + } + + intel_dp->want_panel_vdd = 1; + + if (ironlake_edp_have_panel_vdd(intel_dp)) { + printk(BIOS_ERR, "eDP VDD already on\n"); + return; + } + + if (!ironlake_edp_have_panel_power(intel_dp)) + ironlake_wait_panel_power_cycle(intel_dp); + + pp = ironlake_get_pp_control(); + pp |= EDP_FORCE_VDD; + io_i915_write32(pp, PCH_PP_CONTROL); + // remember this if we need it later. Not sure yet. + ////POSTING_READ(PCH_PP_CONTROL); + printk(BIOS_ERR, "PCH_PP_STATUS: 0x%08lx PCH_PP_CONTROL: 0x%08lx\n", + io_i915_read32(PCH_PP_STATUS), io_i915_read32(PCH_PP_CONTROL)); + + /* + * If the panel wasn't on, delay before accessing aux channel + */ + if (!ironlake_edp_have_panel_power(intel_dp)) { + printk(BIOS_ERR, "eDP was not running\n"); + mdelay(intel_dp->panel_power_up_delay); + } +} + +static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) +{ + u32 pp; + + if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) { + pp = ironlake_get_pp_control(); + pp &= ~EDP_FORCE_VDD; + io_i915_write32(pp, PCH_PP_CONTROL); + ////POSTING_READ(PCH_PP_CONTROL); + + /* Make sure sequencer is idle before allowing subsequent activity */ + printk(BIOS_ERR, "PCH_PP_STATUS: 0x%08lx PCH_PP_CONTROL: 0x%08lx\n", + io_i915_read32(PCH_PP_STATUS), io_i915_read32(PCH_PP_CONTROL)); + + mdelay(intel_dp->panel_power_down_delay); + } +} + +void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, int sync) +{ + if (!is_edp(intel_dp)) + return; + + printk(BIOS_ERR, "Turn eDP VDD off %d\n", intel_dp->want_panel_vdd); + if (!intel_dp->want_panel_vdd) { + printk(BIOS_ERR, "eDP VDD not forced on"); + } + + intel_dp->want_panel_vdd = 0; + + if (sync) + ironlake_panel_vdd_off_sync(intel_dp); +} + +void ironlake_edp_panel_on(struct intel_dp *intel_dp) +{ + u32 pp; + + if (!is_edp(intel_dp)) + return; + + printk(BIOS_ERR, "Turn eDP power on\n"); + + if (ironlake_edp_have_panel_power(intel_dp)) { + printk(BIOS_ERR, "eDP power already on\n"); + return; + } + + ironlake_wait_panel_power_cycle(intel_dp); + + pp = ironlake_get_pp_control(); + if ((intel_dp->gen == 5)) { + /* ILK workaround: disable reset around power sequence */ + pp &= ~PANEL_POWER_RESET; + io_i915_write32(pp, PCH_PP_CONTROL); + ////POSTING_READ(PCH_PP_CONTROL); + } + + pp |= POWER_TARGET_ON; + if (!(intel_dp->gen == 5)) + pp |= PANEL_POWER_RESET; + + io_i915_write32(pp, PCH_PP_CONTROL); + ////POSTING_READ(PCH_PP_CONTROL); + + ironlake_wait_panel_on(intel_dp); + + if ((intel_dp->gen == 5)) { + pp |= PANEL_POWER_RESET; /* restore panel reset bit */ + io_i915_write32(pp, PCH_PP_CONTROL); + ////POSTING_READ(PCH_PP_CONTROL); + } +} + +static void ironlake_edp_panel_off(struct intel_dp *intel_dp) +{ + u32 pp; + + if (!is_edp(intel_dp)) + return; + + printk(BIOS_ERR, "Turn eDP power off\n"); + + if (intel_dp->want_panel_vdd) { + printk(BIOS_ERR, "Cannot turn power off while VDD is on\n"); + } + + pp = ironlake_get_pp_control(); + pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | + PANEL_POWER_RESET | EDP_BLC_ENABLE); + io_i915_write32(pp, PCH_PP_CONTROL); + ////POSTING_READ(PCH_PP_CONTROL); + + ironlake_wait_panel_off(intel_dp); +} + +void ironlake_edp_backlight_on(struct intel_dp *intel_dp) +{ + u32 pp; + + if (!is_edp(intel_dp)) + return; + + /* + * If we enable the backlight right away following a panel power + * on, we may see slight flicker as the panel syncs with the eDP + * link. So delay a bit to make sure the image is solid before + * allowing it to appear. + */ + mdelay(intel_dp->backlight_on_delay); + pp = ironlake_get_pp_control(); + pp |= EDP_BLC_ENABLE; + io_i915_write32(pp, PCH_PP_CONTROL); + ////POSTING_READ(PCH_PP_CONTROL); +} + +static void ironlake_edp_backlight_off(struct intel_dp *intel_dp) +{ + u32 pp; + + if (!is_edp(intel_dp)) + return; + + pp = ironlake_get_pp_control(); + pp &= ~EDP_BLC_ENABLE; + io_i915_write32(pp, PCH_PP_CONTROL); + ////POSTING_READ(PCH_PP_CONTROL); + mdelay(intel_dp->backlight_off_delay); +} + +void ironlake_edp_pll_on(void) +{ + u32 dpa_ctl; + + dpa_ctl = io_i915_read32(DP_A); + dpa_ctl |= DP_PLL_ENABLE; + io_i915_write32(dpa_ctl, DP_A); + ////POSTING_READ(DP_A); + udelay(200); +} + +static void ironlake_edp_pll_off(void) +{ + u32 dpa_ctl; + + dpa_ctl = io_i915_read32(DP_A); + dpa_ctl &= ~DP_PLL_ENABLE; + io_i915_write32(dpa_ctl, DP_A); + ////POSTING_READ(DP_A); + udelay(200); +} + +/* If the sink supports it, try to set the power state appropriately */ +void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) +{ + int ret, i; + + /* Should have a valid DPCD by this point */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + /* the convention, for whatever reason, is that mode > 0 means 'off' */ + if (mode) { + ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER, + DP_SET_POWER_D3); + if (ret != 1) { + printk(BIOS_ERR, "failed to write sink power state\n"); + } + } else { + /* + * When turning on, we need to retry for 1ms to give the sink + * time to wake up. + */ + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_write_1(intel_dp, + DP_SET_POWER, + DP_SET_POWER_D0); + if (ret == 1) + break; + mdelay(1); + } + } +} +// not sure if needed yet or not. +void intel_dp_prepare(struct intel_dp *intel_dp); +void intel_dp_prepare(struct intel_dp *intel_dp) +{ + + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + + /* Wake up the sink first */ + ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, 0); + intel_dp_link_down(intel_dp); + ironlake_edp_panel_vdd_off(intel_dp, 0); + + /* Make sure the panel is off before trying to + * change the mode + */ +} + +// might be useful. +void intel_dp_commit(struct intel_dp *intel_dp); +void intel_dp_commit(struct intel_dp *intel_dp) +{ + + ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, 0); + intel_dp_start_link_train(intel_dp); + ironlake_edp_panel_on(intel_dp); + ironlake_edp_panel_vdd_off(intel_dp, 1); + intel_dp_complete_link_train(intel_dp); + ironlake_edp_backlight_on(intel_dp); + + intel_dp->dpms_mode = 0; +} + +void +intel_dp_dpms(struct intel_dp *intel_dp, int mode) +{ + uint32_t dp_reg = io_i915_read32(intel_dp->output_reg); + + printk(BIOS_SPEW, "%s: power %s\n", __func__, mode ? "off" : "on"); + if (mode){ + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + + ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, mode); + intel_dp_link_down(intel_dp); + ironlake_edp_panel_vdd_off(intel_dp, 0); + + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_off(); + } else { + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_on(); + + ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, mode); + if (!(dp_reg & DP_PORT_EN)) { + intel_dp_start_link_train(intel_dp); + ironlake_edp_panel_on(intel_dp); + ironlake_edp_panel_vdd_off(intel_dp, 1); + intel_dp_complete_link_train(intel_dp); + } else + ironlake_edp_panel_vdd_off(intel_dp, 0); + ironlake_edp_backlight_on(intel_dp); + } + intel_dp->dpms_mode = mode; +} + +/* + * Native read with retry for link status and receiver capability reads for + * cases where the sink may still be asleep. + */ +static int +intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, + uint8_t *recv, int recv_bytes) +{ + int ret, i; + + /* + * Sinks are *supposed* to come up within 1ms from an off state, + * but we're also supposed to retry 3 times per the spec. + */ + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_read(intel_dp, address, recv, + recv_bytes); + if (ret == recv_bytes) + return ret; + mdelay(1); + } + + return ret; +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static int +intel_dp_get_link_status(struct intel_dp *intel_dp, + uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + int ret, i; + + ret = intel_dp_aux_native_read_retry(intel_dp, + DP_LANE0_1_STATUS, + link_status, + DP_LINK_STATUS_SIZE); + + printk(BIOS_SPEW, "%s:", __func__); + for(i = 0; i < /* !!sizeof(link_status) == 4*/ + DP_LINK_STATUS_SIZE; i++) + printk(BIOS_SPEW, " %02x", link_status[i]); + printk(BIOS_SPEW, "\n"); + return ret; +} + +static uint8_t +intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int r) +{ + return link_status[r - DP_LANE0_1_STATUS]; +} + +#if 0 +static uint8_t +intel_get_adjust_request_voltage(uint8_t adjust_request[2], + int lane) +{ + int s = ((lane & 1) ? + DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : + DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); + uint8_t l = adjust_request[lane>>1]; + + return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; +} + +static uint8_t +intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2], + int lane) +{ + int s = ((lane & 1) ? + DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); + uint8_t l = adjust_request[lane>>1]; + + return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; +} +#endif +const char *voltage_names[] = { + "0.4V", "0.6V", "0.8V", "1.2V" +}; +const char *pre_emph_names[] = { + "0dB", "3.5dB", "6dB", "9.5dB" +}; +const char *link_train_names[] = { + "pattern 1", "pattern 2", "idle", "off" +}; + +/* + * These are source-specific values; current Intel hardware supports + * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB + */ + +static uint8_t +intel_dp_voltage_max(struct intel_dp *intel_dp) +{ + + if ((intel_dp->gen == 7) && is_cpu_edp(intel_dp)) + return DP_TRAIN_VOLTAGE_SWING_800; + else if (intel_dp->has_pch_cpt && !is_cpu_edp(intel_dp)) + return DP_TRAIN_VOLTAGE_SWING_1200; + else + return DP_TRAIN_VOLTAGE_SWING_800; +} + +static uint8_t +intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) +{ + + if (intel_dp->is_haswell){ + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_9_5; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else if ((intel_dp->gen == 7) && is_cpu_edp(intel_dp)) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } +} + +static void +intel_get_adjust_train(struct intel_dp *intel_dp, + uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + uint8_t v = 0; + uint8_t p = 0; + int lane; + uint8_t voltage_max; + uint8_t preemph_max; + + for (lane = 0; lane < intel_dp->lane_count; lane++) { + uint8_t this_v = drm_dp_get_adjust_request_voltage( + link_status, lane); + uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis( + link_status, lane); + + if (this_v > v) + v = this_v; + if (this_p > p) + p = this_p; + } + + voltage_max = intel_dp_voltage_max(intel_dp); + if (v >= voltage_max) + v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; + + preemph_max = intel_dp_pre_emphasis_max(intel_dp, v); + if (p >= preemph_max) + p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + printk(BIOS_SPEW, "%s: set to %s %s%s %s\n", + __func__, + voltage_names[v&3], pre_emph_names[p&3], + v & DP_TRAIN_MAX_SWING_REACHED ? ",max volt swing reached":"", + p & DP_TRAIN_MAX_PRE_EMPHASIS_REACHED ? + ", max pre emph reached" : ""); + for (lane = 0; lane < 4; lane++) + intel_dp->train_set[lane] = v | p; +} + +static uint32_t +intel_dp_signal_levels(uint8_t train_set) +{ + uint32_t signal_levels = 0; + + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + default: + signal_levels |= DP_VOLTAGE_0_4; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + signal_levels |= DP_VOLTAGE_0_6; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + signal_levels |= DP_VOLTAGE_0_8; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + signal_levels |= DP_VOLTAGE_1_2; + break; + } + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + default: + signal_levels |= DP_PRE_EMPHASIS_0; + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + signal_levels |= DP_PRE_EMPHASIS_3_5; + break; + case DP_TRAIN_PRE_EMPHASIS_6: + signal_levels |= DP_PRE_EMPHASIS_6; + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + signal_levels |= DP_PRE_EMPHASIS_9_5; + break; + } + return signal_levels; +} + +/* Gen6's DP voltage swing and pre-emphasis control */ +static uint32_t +intel_gen6_edp_signal_levels(uint8_t train_set) +{ + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6: + return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: + case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B; + default: + printk(BIOS_ERR, "[000000.0] [drm:%s], ", __func__); + printk(BIOS_ERR, "Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; + } +} + +/* Gen7's DP voltage swing and pre-emphasis control */ +static uint32_t +intel_gen7_edp_signal_levels(uint8_t train_set) +{ + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_400MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_400MV_3_5DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: + return EDP_LINK_TRAIN_400MV_6DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_600MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_600MV_3_5DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_800MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_800MV_3_5DB_IVB; + + default: + printk(BIOS_ERR, "[000000.0] [drm:%s], ", __func__); + printk(BIOS_ERR, "Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return EDP_LINK_TRAIN_500MV_0DB_IVB; + } +} + +/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */ +static uint32_t +intel_dp_signal_levels_hsw(uint8_t train_set) +{ + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_400MV_0DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_400MV_3_5DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: + return DDI_BUF_EMP_400MV_6DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_9_5: + return DDI_BUF_EMP_400MV_9_5DB_HSW; + + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_600MV_0DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_600MV_3_5DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6: + return DDI_BUF_EMP_600MV_6DB_HSW; + + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_800MV_0DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_800MV_3_5DB_HSW; + default: + printk(BIOS_SPEW, + "Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return DDI_BUF_EMP_400MV_0DB_HSW; + } +} + + +static uint8_t +intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int s = (lane & 1) * 4; + uint8_t l = link_status[lane>>1]; + + return (l >> s) & 0xf; +} + +/* Check for clock recovery is done on all channels */ +static int +intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane_count) +{ + int lane; + uint8_t lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + printk(BIOS_SPEW, + "%s: Lane %d, status %02x\n", __func__, + lane, lane_status); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return 0; + } + return 1; +} + +/* Check to see if channel eq is done on all channels */ +#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE| \ + DP_LANE_CHANNEL_EQ_DONE| \ + DP_LANE_SYMBOL_LOCKED) +static int +intel_channel_eq_ok(struct intel_dp *intel_dp, + uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + uint8_t lane_align; + uint8_t lane_status; + int lane; + + lane_align = intel_dp_link_status(link_status, + DP_LANE_ALIGN_STATUS_UPDATED); + if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) + return 0; + for (lane = 0; lane < intel_dp->lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) + return 0; + } + return 1; +} + +static int +intel_dp_set_link_train(struct intel_dp *intel_dp, + uint32_t dp_reg_value, + uint8_t dp_train_pat) +{ + int ret; + u32 temp; + int port = intel_dp->port; + int i; + + printk(BIOS_SPEW, "%s: dp_reg_value %08lx dp_train_pat %02x\n", + __func__, (unsigned long) dp_reg_value, dp_train_pat); + if (intel_dp->is_haswell){ + temp = io_i915_read32(DP_TP_CTL(port)); + + if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE) + temp |= DP_TP_CTL_SCRAMBLE_DISABLE; + else + temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE; + + temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; + switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { + case DP_TRAINING_PATTERN_DISABLE: + temp |= DP_TP_CTL_LINK_TRAIN_IDLE; + io_i915_write32( temp, DP_TP_CTL(port)); + + for(i = 0; i < 10; i++){ + u32 status; + status = io_i915_read32(DP_TP_STATUS(port)); + if (status & DP_TP_STATUS_IDLE_DONE) + break; + } + + if (i == 10) + printk(BIOS_ERR, + "Timed out waiting for DP idle patterns\n"); + + temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; + temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; + + break; + case DP_TRAINING_PATTERN_1: + temp |= DP_TP_CTL_LINK_TRAIN_PAT1; + break; + case DP_TRAINING_PATTERN_2: + temp |= DP_TP_CTL_LINK_TRAIN_PAT2; + break; + case DP_TRAINING_PATTERN_3: + temp |= DP_TP_CTL_LINK_TRAIN_PAT3; + break; + } + io_i915_write32( temp, DP_TP_CTL(port)); + + } else if (intel_dp->has_pch_cpt && + (intel_dp->gen != 7 || !is_cpu_edp(intel_dp))) { + dp_reg_value &= ~DP_LINK_TRAIN_MASK_CPT; + + switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { + case DP_TRAINING_PATTERN_DISABLE: + dp_reg_value |= DP_LINK_TRAIN_OFF_CPT; + break; + case DP_TRAINING_PATTERN_1: + dp_reg_value |= DP_LINK_TRAIN_PAT_1_CPT; + break; + case DP_TRAINING_PATTERN_2: + dp_reg_value |= DP_LINK_TRAIN_PAT_2_CPT; + break; + case DP_TRAINING_PATTERN_3: + printk(BIOS_ERR, + "DP training pattern 3 not supported\n"); + dp_reg_value |= DP_LINK_TRAIN_PAT_2_CPT; + break; + } + + } else { + dp_reg_value &= ~DP_LINK_TRAIN_MASK; + + switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { + case DP_TRAINING_PATTERN_DISABLE: + dp_reg_value |= DP_LINK_TRAIN_OFF; + break; + case DP_TRAINING_PATTERN_1: + dp_reg_value |= DP_LINK_TRAIN_PAT_1; + break; + case DP_TRAINING_PATTERN_2: + dp_reg_value |= DP_LINK_TRAIN_PAT_2; + break; + case DP_TRAINING_PATTERN_3: + printk(BIOS_ERR,"DP training pattern 3 not supported\n"); + dp_reg_value |= DP_LINK_TRAIN_PAT_2; + break; + } + } + + io_i915_write32( dp_reg_value, intel_dp->output_reg); + //POSTING_READ(intel_dp->output_reg); + + intel_dp_aux_native_write_1(intel_dp, + DP_TRAINING_PATTERN_SET, + dp_train_pat); + + if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) != + DP_TRAINING_PATTERN_DISABLE) { + ret = intel_dp_aux_native_write(intel_dp, + DP_TRAINING_LANE0_SET, + intel_dp->train_set, + intel_dp->lane_count); + if (ret != intel_dp->lane_count){ + printk(BIOS_ERR, "%s: wanted %d, got %d\n", __func__, + intel_dp->lane_count, ret); + return 0; + } + } + + printk(BIOS_SPEW, "%s: success\n", __func__); + return 1; +} + +/* Enable corresponding port and start training pattern 1 */ +void +intel_dp_start_link_train(struct intel_dp *intel_dp) +{ + int i; + uint8_t voltage; + int clock_recovery = 0; + int voltage_tries, loop_tries; + u32 reg; + uint32_t DP = intel_dp->DP; + + if (intel_dp->is_haswell) + intel_ddi_prepare_link_retrain(intel_dp, intel_dp->port); + + /* Write the link configuration data */ + printk(BIOS_SPEW, "Write the link configuration data\n"); + intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, + intel_dp->link_configuration, + DP_LINK_CONFIGURATION_SIZE); + printk(BIOS_SPEW, "Written\n"); + + DP |= DP_PORT_EN; + + memset(intel_dp->train_set, 0, 4); + voltage = 0xff; + voltage_tries = 0; + loop_tries = 0; + clock_recovery = 0; + + for (;;) { + /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + uint8_t link_status[DP_LINK_STATUS_SIZE]; + uint32_t signal_levels; + + if (intel_dp->is_haswell){ + signal_levels = + intel_dp_signal_levels_hsw(intel_dp->train_set[0]); + DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels; + printk(BIOS_SPEW, "Haswell: levels %08x DP %08x\n", signal_levels, DP); + } else if ((intel_dp->gen == 7) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels; + } else if ((intel_dp->gen == 6) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; + } else { + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + } + printk(BIOS_ERR, "training pattern 1 signal levels %08x\n", signal_levels); + + if (intel_dp->has_pch_cpt && ((intel_dp->gen == 7) || !is_cpu_edp(intel_dp))) + reg = DP | DP_LINK_TRAIN_PAT_1_CPT; + else + reg = DP | DP_LINK_TRAIN_PAT_1; + + if (!intel_dp_set_link_train(intel_dp, reg, + DP_TRAINING_PATTERN_1 | + DP_LINK_SCRAMBLING_DISABLE)) + break; + /* Set training pattern 1 */ + + udelay(100); + if (!intel_dp_get_link_status(intel_dp, link_status)) { + printk(BIOS_ERR, "failed to get link status\n"); + break; + } + + if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { + printk(BIOS_ERR, "clock recovery OK\n"); + clock_recovery = 1; + break; + } + + /* Check to see if we've tried the max voltage */ + for (i = 0; i < intel_dp->lane_count; i++) + if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) + break; + if (i == intel_dp->lane_count) { + ++loop_tries; + if (loop_tries == 5) { + printk(BIOS_ERR, "too many full retries, give up\n"); + break; + } + printk(BIOS_SPEW, "%s: reset train set\n", __func__); + memset(intel_dp->train_set, 0, 4); + voltage_tries = 0; + continue; + } + + /* Check to see if we've tried the same voltage 5 times */ + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++voltage_tries; + if (voltage_tries == 5) { + printk(BIOS_ERR, "too many voltage retries, give up\n"); + break; + } + } else + voltage_tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + printk(BIOS_SPEW, "%s: voltage now %s\n", __func__, + voltage_names[voltage]); + + /* Compute new intel_dp->train_set as requested by target */ + intel_get_adjust_train(intel_dp, link_status); + printk(BIOS_SPEW, "%s: new intel train set is " + "%02x%02x%02x%02x", + __func__, + intel_dp->train_set[0], intel_dp->train_set[1], + intel_dp->train_set[2], intel_dp->train_set[3]); + } + + intel_dp->DP = DP; +} + +void +intel_dp_complete_link_train(struct intel_dp *intel_dp) +{ + int channel_eq = 0; + int tries, cr_tries; + uint32_t DP = intel_dp->DP; + + /* channel equalization */ + tries = 0; + cr_tries = 0; + channel_eq = 0; + for (;;) { + /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + + if (cr_tries > 5) { + printk(BIOS_ERR, "failed to train DP, aborting\n"); + intel_dp_link_down(intel_dp); + break; + } + + if (intel_dp->is_haswell) { + signal_levels = intel_dp_signal_levels_hsw(intel_dp->train_set[0]); + DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels; + printk(BIOS_SPEW, "%s: new DP %08x\n", __func__, + DP); + } else if ((intel_dp->gen == 7) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels; + } else if ((intel_dp->gen == 6) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; + } else { + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + } + + /* channel eq pattern */ + if (!intel_dp_set_link_train(intel_dp, DP, + DP_TRAINING_PATTERN_2 | + DP_LINK_SCRAMBLING_DISABLE)) + break; + + udelay(40000); /* was 400 */ + if (!intel_dp_get_link_status(intel_dp, link_status)) + break; + + /* Make sure clock is still ok */ + if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { + printk(BIOS_SPEW, "%s: Clock recovery is NOT ok" + ": restarting from the start\n", __func__); + intel_dp_start_link_train(intel_dp); + cr_tries++; + continue; + } + + if (intel_channel_eq_ok(intel_dp, link_status)) { + printk(BIOS_SPEW, "%s: success\n", __func__); + channel_eq = 1; + break; + } + + /* Try 5 times, then try clock recovery if that fails */ + if (tries > 5) { + printk(BIOS_SPEW, "%s: tries > 5,recovering. \n", + __func__); + intel_dp_link_down(intel_dp); + intel_dp_start_link_train(intel_dp); + tries = 0; + cr_tries++; + continue; + } + + /* Compute new intel_dp->train_set as requested by target */ + printk(BIOS_SPEW, "%s: adjust the train\n", __func__); + intel_get_adjust_train(intel_dp, link_status); + ++tries; + } + + //io_i915_write32(reg, intel_dp->output_reg); + ////POSTING_READ(intel_dp->output_reg); + intel_dp_set_link_train(intel_dp, DP, DP_TRAINING_PATTERN_DISABLE); +} + +void +intel_dp_link_down(struct intel_dp *intel_dp) +{ + uint32_t DP = intel_dp->DP; + + if ((io_i915_read32(intel_dp->output_reg) & DP_PORT_EN) == 0) + return; + + if (intel_dp->is_haswell){ + printk(BIOS_SPEW, "%s: It's a haswell, skip this\n", __func__); + return; + } + if (is_edp(intel_dp)) { + DP &= ~DP_PLL_ENABLE; + io_i915_write32(DP, intel_dp->output_reg); + ////POSTING_READ(intel_dp->output_reg); + udelay(100); + } + + if (intel_dp->has_pch_cpt && ((intel_dp->gen == 7) || !is_cpu_edp(intel_dp))) { + DP &= ~DP_LINK_TRAIN_MASK_CPT; + io_i915_write32(DP | DP_LINK_TRAIN_PAT_IDLE_CPT, intel_dp->output_reg); + } else { + DP &= ~DP_LINK_TRAIN_MASK; + io_i915_write32(DP | DP_LINK_TRAIN_PAT_IDLE, intel_dp->output_reg); + } + ////POSTING_READ(intel_dp->output_reg); + + mdelay(17); + + if (is_edp(intel_dp)) { + if (intel_dp->has_pch_cpt && ((intel_dp->gen == 7) || !is_cpu_edp(intel_dp))) + DP |= DP_LINK_TRAIN_OFF_CPT; + else + DP |= DP_LINK_TRAIN_OFF; + } + + DP &= ~DP_AUDIO_OUTPUT_ENABLE; + io_i915_write32(DP & ~DP_PORT_EN, intel_dp->output_reg); + ////POSTING_READ(intel_dp->output_reg); + mdelay(600000); //intel_dp->panel_power_down_delay); +} + +int +intel_dp_get_dpcd(struct intel_dp *intel_dp) +{ + int got = 0, want = sizeof(intel_dp->dpcd), rev; + got = intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd, + want); + if (got < want) { + printk(BIOS_SPEW, "%s: got %d, wanted %d\n", __func__, got, want); + return 0; + } + + rev = intel_dp->dpcd[DP_DPCD_REV]; + if (!rev){ + printk(BIOS_SPEW, "%s: intel->dp[DP_DPCD_REV] is 0\n", + __func__); + return 0; + } + + printk(BIOS_SPEW, "DPCD: %02hx%02hx%02hx%02hx%02hx%02hx%02hx%02hx\n", + intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2], + intel_dp->dpcd[3], intel_dp->dpcd[4], intel_dp->dpcd[5], + intel_dp->dpcd[6], intel_dp->dpcd[7]); + return 1; +} + +/* I have no idea how big max downspread is. 1 byte? Hard as hell to find. */ +int +intel_dp_get_max_downspread(struct intel_dp *intel_dp, u8 *max_downspread) +{ + int got, want = 1; + got = intel_dp_aux_native_read_retry(intel_dp, 0x000, max_downspread, + want); + if (got < want) { + printk(BIOS_SPEW, "%s: got %d, wanted %d\n", __func__, got, want); + return 0; + } + + printk(BIOS_SPEW, "%s: max_downspread is %02x\n", __func__, *max_downspread); + return 1; +} + |