diff options
Diffstat (limited to 'src/drivers')
| -rw-r--r-- | src/drivers/i2c/pcf8523/Kconfig | 18 | ||||
| -rw-r--r-- | src/drivers/i2c/pcf8523/Makefile.inc | 16 | ||||
| -rw-r--r-- | src/drivers/i2c/pcf8523/chip.h | 44 | ||||
| -rw-r--r-- | src/drivers/i2c/pcf8523/pcf8523.c | 148 | ||||
| -rw-r--r-- | src/drivers/i2c/pcf8523/pcf8523.h | 97 |
5 files changed, 323 insertions, 0 deletions
diff --git a/src/drivers/i2c/pcf8523/Kconfig b/src/drivers/i2c/pcf8523/Kconfig new file mode 100644 index 0000000000..c6d40a277b --- /dev/null +++ b/src/drivers/i2c/pcf8523/Kconfig @@ -0,0 +1,18 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2016 Siemens AG +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +config DRIVERS_I2C_PCF8523 + bool + default n diff --git a/src/drivers/i2c/pcf8523/Makefile.inc b/src/drivers/i2c/pcf8523/Makefile.inc new file mode 100644 index 0000000000..6dc6ea1383 --- /dev/null +++ b/src/drivers/i2c/pcf8523/Makefile.inc @@ -0,0 +1,16 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2016 Siemens AG +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +ramstage-$(CONFIG_DRIVERS_I2C_PCF8523) += pcf8523.c diff --git a/src/drivers/i2c/pcf8523/chip.h b/src/drivers/i2c/pcf8523/chip.h new file mode 100644 index 0000000000..13cd401201 --- /dev/null +++ b/src/drivers/i2c/pcf8523/chip.h @@ -0,0 +1,44 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2016 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "pcf8523.h" + +struct drivers_i2c_pcf8523_config { + unsigned char cap_sel; /* Internal capacitor selection */ + unsigned char second_int_en; /* Enable IRQ for seconds */ + unsigned char alarm_int_en; /* Enable IRQ for alarm */ + unsigned char correction_int_en;/* Enable IRQ for corrections */ + unsigned char wdt_int_en; /* Enable IRQ for watchdog */ + unsigned char tmrA_int_en; /* Enable IRQ for timer A */ + unsigned char tmrB_int_en; /* Enable IRQ for timer B */ + unsigned char power_mode; /* Set up power mode */ + unsigned char bat_switch_int_en;/* Enable IRQ for battery switch */ + unsigned char bat_low_int_en; /* Enable IRQ for low battery */ + unsigned char offset_mode; /* Set up mode how to handle offset */ + unsigned char offset_val; /* Value for offset adjustment */ + unsigned char tmrA_mode; /* Operation mode of timer A */ + unsigned char tmrA_int_mode; /* IRQ mode for timer A */ + unsigned char tmrB_mode; /* Operation mode for timer B */ + unsigned char tmrB_int_mode; /* IRQ mode for timer B */ + unsigned char cof_selection; /* Set up "clock out" frequency */ + unsigned char tmrA_prescaler; /* Prescaler for timer A */ + unsigned char tmrB_prescaler; /* Prescaler for timer B */ + unsigned char tmrB_pulse_cfg; /* Pulse width config for timer B */ + unsigned char set_user_date; /* Use user date from device tree */ + unsigned char user_year; /* User year to set */ + unsigned char user_month; /* User month to set */ + unsigned char user_day; /* User day to set */ + unsigned char user_weekday; /* User weekday to set */ +}; diff --git a/src/drivers/i2c/pcf8523/pcf8523.c b/src/drivers/i2c/pcf8523/pcf8523.c new file mode 100644 index 0000000000..eb0bf25123 --- /dev/null +++ b/src/drivers/i2c/pcf8523/pcf8523.c @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2016 Siemens AG. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/smbus.h> +#include <version.h> +#include <console/console.h> +#include <bcd.h> +#include "chip.h" + +/* Set RTC date from coreboot build date. */ +static void pcf8523_set_build_date(struct device *dev) +{ + smbus_write_byte(dev, YEAR_REG, coreboot_build_date.year); + smbus_write_byte(dev, MONTH_REG, coreboot_build_date.month); + smbus_write_byte(dev, WEEKDAY_REG, coreboot_build_date.weekday); + smbus_write_byte(dev, DAY_REG, coreboot_build_date.day); +} + +/* Set RTC date from user defined date (available in e.g. device tree). */ +static void pcf8523_set_user_date(struct device *dev) +{ + struct drivers_i2c_pcf8523_config *config = dev->chip_info; + smbus_write_byte(dev, YEAR_REG, bin2bcd(config->user_year)); + smbus_write_byte(dev, MONTH_REG, bin2bcd(config->user_month)); + smbus_write_byte(dev, DAY_REG, bin2bcd(config->user_day)); + smbus_write_byte(dev, WEEKDAY_REG, bin2bcd(config->user_weekday)); +} + +static void pcf8523_final(struct device *dev) +{ + /* Read back current RTC date and time and print it to the console. */ + printk(BIOS_INFO, "%s: Current date %02d.%02d.%02d %02d:%02d:%02d\n", + dev->chip_ops->name, + bcd2bin(smbus_read_byte(dev, MONTH_REG)), + bcd2bin(smbus_read_byte(dev, DAY_REG)), + bcd2bin(smbus_read_byte(dev, YEAR_REG)), + bcd2bin(smbus_read_byte(dev, HOUR_REG)), + bcd2bin(smbus_read_byte(dev, MINUTE_REG)), + bcd2bin(smbus_read_byte(dev, SECOND_REG)) & ~OS_BIT); +} + +static void pcf8523_init(struct device *dev) +{ + struct drivers_i2c_pcf8523_config *config = dev->chip_info; + uint8_t reg = 0; + + if (!(smbus_read_byte(dev, SECOND_REG) & OS_BIT)) { + /* Set control registers to a known good value even if no + * power loss event was recognized. There were issues with + * this RTC in the past where control registers were + * corrupted and OS bit was not set. */ + reg = smbus_read_byte(dev, CTRL_REG_1); + reg &= ~(STOP_BIT | CAP_SEL); + reg |= config->cap_sel; + smbus_write_byte(dev, CTRL_REG_1, reg); + reg = smbus_read_byte(dev, CTRL_REG_3); + reg &= ~PM_MASK; + reg |= config->power_mode; + smbus_write_byte(dev, CTRL_REG_3, reg); + reg = smbus_read_byte(dev, TMR_CLKOUT_REG); + reg &= ~COF_MASK; + reg |= config->cof_selection; + smbus_write_byte(dev, TMR_CLKOUT_REG, reg); + return; + } + + /* Initialize the RTC fully only if a power-loss event was recognized. + * In this case RTC will be set up with default date and time. */ + smbus_write_byte(dev, CTRL_REG_1, ((!!config->cap_sel) << 7) | + ((!!config->second_int_en) << 2) | + ((!!config->alarm_int_en) << 1) | + (!!config->correction_int_en)); + + smbus_write_byte(dev, CTRL_REG_2, ((!!config->wdt_int_en) << 2) | + ((!!config->tmrA_int_en) << 1) | + (!!config->tmrB_int_en)); + + smbus_write_byte(dev, CTRL_REG_3, ((config->power_mode & 0x03) << 5) | + ((!!config->bat_switch_int_en) << 1) | + (!!config->bat_low_int_en)); + + smbus_write_byte(dev, OFFSET_REG, ((!!config->offset_mode) << 7) | + (config->offset_val & 0x7f)); + + smbus_write_byte(dev, TMR_CLKOUT_REG, ((!!config->tmrA_int_mode) << 7) | + ((!!config->tmrB_int_mode) << 6) | + ((config->cof_selection & 0x38) << 3) | + ((config->tmrA_mode & 0x03) << 1) | + (!!config->tmrB_mode)); + + smbus_write_byte(dev, TMR_A_FREQ_REG, (config->tmrA_prescaler & 0x7)); + + smbus_write_byte(dev, TMR_B_FREQ_REG, (config->tmrB_prescaler & 0x7) | + ((config->tmrB_pulse_cfg & 0x7) << 4)); + + /* Before setting the clock stop oscillator. */ + reg = smbus_read_byte(dev, CTRL_REG_1); + reg |= STOP_BIT; + smbus_write_byte(dev, CTRL_REG_1, reg); + if (config->set_user_date) { + /* Set user date defined in device tree. */ + printk(BIOS_DEBUG, "%s: Set to user date\n", + dev->chip_ops->name); + pcf8523_set_user_date(dev); + } else { + /* Set date from coreboot build. */ + printk(BIOS_DEBUG, "%s: Set to coreboot build date\n", + dev->chip_ops->name); + pcf8523_set_build_date(dev); + } + /* Set time to 01:00:00 */ + smbus_write_byte(dev, HOUR_REG, 1); + smbus_write_byte(dev, MINUTE_REG, 0); + smbus_write_byte(dev, SECOND_REG, 0); + /* Start oscillator again as the clock is set up now */ + reg &= ~STOP_BIT; + smbus_write_byte(dev, CTRL_REG_1, reg); +} + +static struct device_operations pcf8523c_ops = { + .read_resources = DEVICE_NOOP, + .set_resources = DEVICE_NOOP, + .enable_resources = DEVICE_NOOP, + .init = pcf8523_init, + .final = pcf8523_final +}; + +static void pcf8523_enable(struct device *dev) +{ + dev->ops = &pcf8523c_ops; +} + +struct chip_operations drivers_i2c_pcf8523_ops = { + CHIP_NAME("PCF8523") + .enable_dev = pcf8523_enable +}; diff --git a/src/drivers/i2c/pcf8523/pcf8523.h b/src/drivers/i2c/pcf8523/pcf8523.h new file mode 100644 index 0000000000..3d863844e2 --- /dev/null +++ b/src/drivers/i2c/pcf8523/pcf8523.h @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef _I2C_PCF8523_H_ +#define _I2C_PCF8523_H_ + +/* The address of this RTC is fixed. */ +#define PCF8523_SLAVE_ADR 0x68 + +/* Register layout */ +#define CTRL_REG_1 0x00 +#define STOP_BIT (1 << 5) +#define CAP_SEL (1 << 7) +#define CTRL_REG_2 0x01 +#define CTRL_REG_3 0x02 +#define PM_MASK (7 << 5) +#define SECOND_REG 0x03 +#define OS_BIT (1 << 7) +#define MINUTE_REG 0x04 +#define HOUR_REG 0x05 +#define DAY_REG 0x06 +#define WEEKDAY_REG 0x07 +#define MONTH_REG 0x08 +#define YEAR_REG 0x09 +#define ALARM_MINUTE_REG 0x0A +#define ALARM_HOUR_REG 0x0B +#define ALARM_DAY_REG 0x0C +#define ALARM_WEEKDAY_REG 0x0D +#define OFFSET_REG 0x0E +#define TMR_CLKOUT_REG 0x0F +#define COF_MASK 0x38 +#define TMR_A_FREQ_REG 0x10 +#define TMR_A_REG 0x11 +#define TMR_B_FREQ_REG 0x12 +#define TMR_B_REG 0x13 + +/* Define used capacitor modes */ +/* Valid for parameter cap_sel */ +#define CAP_SEL_7_PF 0x00 +#define CAP_SEL_12_PF 0x01 + +/* Define supported power modes */ +/* Valid for parameter power_mode */ +#define PM_BAT_SW_STD_LOW_DETECT 0x00 +#define PM_BAT_SW_DIRECT_LOW_DETECT 0x01 +#define PM_BAT_SW_OFF_LOW_DETECT 0x02 +#define PM_BAT_SW_STD_LOW_DETECT_OFF 0x04 +#define PM_BAT_SW_DIRECT_LOW_DETECT_OFF 0x05 +#define PM_BAT_SW_OFF_LOW_DETECT_OFF 0x07 + +/* Define CLKOUT frequency divider values */ +/* Valid for parameter cof_selection */ +#define COF_32768_HZ 0x00 +#define COF_16384_HZ 0x01 +#define COF_8192_HZ 0x02 +#define COF_4096_HZ 0x03 +#define COF_1024_HZ 0x04 +#define COF_32_HZ 0x05 +#define COF_1_HZ 0x06 +#define COF_OFF 0x07 + +/* Define timer A & B set up values */ +/* Valid for parameter tmrA_prescaler and tmrB_prescaler */ +#define TMR_CLK_4096_HZ 0x00 +#define TMR_CLK_64_HZ 0x01 +#define TMR_CLK_1_HZ 0x02 +#define TMR_CLK_1_60_HZ 0x03 +#define TMR_CLK_1_3600_HZ 0x07 + +/* Valid for parameter tmrA_mode and tmrB_mode */ +#define TMR_DISABLED 0x00 +#define TMR_A_MODE_COUNTDOWN 0x01 +#define TMR_A_MODE_WATCHDOG 0x02 +#define TMR_B_MODE_ENABLED 0x01 + +/* Valid for parameter tmrB_pulse_cfg */ +#define TMR_B_PULSE_WIDTH_46_MS 0x00 +#define TMR_B_PULSE_WIDTH_62_MS 0x01 +#define TMR_B_PULSE_WIDTH_78_MS 0x02 +#define TMR_B_PULSE_WIDTH_93_MS 0x03 +#define TMR_B_PULSE_WIDTH_125_MS 0x04 +#define TMR_B_PULSE_WIDTH_156_MS 0x05 +#define TMR_B_PULSE_WIDTH_187_MS 0x06 +#define TMR_B_PULSE_WIDTH_218_MS 0x07 + +#endif /* _I2C_PCF8523_H_ */ |