diff options
Diffstat (limited to 'src/drivers/xgi/common/initdef.h')
-rw-r--r-- | src/drivers/xgi/common/initdef.h | 704 |
1 files changed, 0 insertions, 704 deletions
diff --git a/src/drivers/xgi/common/initdef.h b/src/drivers/xgi/common/initdef.h deleted file mode 100644 index e164e6bb66..0000000000 --- a/src/drivers/xgi/common/initdef.h +++ /dev/null @@ -1,704 +0,0 @@ -/* $XFree86$ */ -/* $XdotOrg$ */ -/* - * Global definitions for init.c and init301.c - * - * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria - * - * If distributed as part of the Linux kernel, the following license terms - * apply: - * - * * This program is free software; you can redistribute it and/or modify - * * it under the terms of the GNU General Public License as published by - * * the Free Software Foundation; either version 2 of the named License, - * * or any later version. - * * - * * This program is distributed in the hope that it will be useful, - * * but WITHOUT ANY WARRANTY; without even the implied warranty of - * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * * GNU General Public License for more details. - * - * Otherwise, the following license terms apply: - * - * * Redistribution and use in source and binary forms, with or without - * * modification, are permitted provided that the following conditions - * * are met: - * * 1) Redistributions of source code must retain the above copyright - * * notice, this list of conditions and the following disclaimer. - * * 2) Redistributions in binary form must reproduce the above copyright - * * notice, this list of conditions and the following disclaimer in the - * * documentation and/or other materials provided with the distribution. - * * 3) The name of the author may not be used to endorse or promote products - * * derived from this software without specific prior written permission. - * * - * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Author: Thomas Winischhofer <thomas@winischhofer.net> - * - */ - -#ifndef _INITDEF_ -#define _INITDEF_ - -#define IS_SIS330 (SiS_Pr->ChipType == SIS_330) -#define IS_SIS550 (SiS_Pr->ChipType == SIS_550) -#define IS_SIS650 (SiS_Pr->ChipType == SIS_650) /* All versions, incl 651, M65x */ -#define IS_SIS740 (SiS_Pr->ChipType == SIS_740) -#define IS_SIS651 (SiS_Pr->SiS_SysFlags & (SF_Is651 | SF_Is652)) -#define IS_SISM650 (SiS_Pr->SiS_SysFlags & (SF_IsM650 | SF_IsM652 | SF_IsM653)) -#define IS_SIS65x (IS_SIS651 || IS_SISM650) /* Only special versions of 65x */ -#define IS_SIS661 (SiS_Pr->ChipType == SIS_661) -#define IS_SIS741 (SiS_Pr->ChipType == SIS_741) -#define IS_SIS660 (SiS_Pr->ChipType == SIS_660) -#define IS_SIS760 (SiS_Pr->ChipType == SIS_760) -#define IS_SIS761 (SiS_Pr->ChipType == SIS_761) -#define IS_SIS661741660760 (IS_SIS661 || IS_SIS741 || IS_SIS660 || IS_SIS760 || IS_SIS761) -#define IS_SIS650740 ((SiS_Pr->ChipType >= SIS_650) && (SiS_Pr->ChipType < SIS_330)) -#define IS_SIS550650740 (IS_SIS550 || IS_SIS650740) -#define IS_SIS650740660 (IS_SIS650 || IS_SIS740 || IS_SIS661741660760) -#define IS_SIS550650740660 (IS_SIS550 || IS_SIS650740660) - -#define SISGETROMW(x) (ROMAddr[(x)] | (ROMAddr[(x)+1] << 8)) - -/* SiS_VBType */ -#define VB_SIS301 0x0001 -#define VB_SIS301B 0x0002 -#define VB_SIS302B 0x0004 -#define VB_SIS301LV 0x0008 -#define VB_SIS302LV 0x0010 -#define VB_SIS302ELV 0x0020 -#define VB_SIS301C 0x0040 -#define VB_SIS307T 0x0080 -#define VB_SIS307LV 0x0100 -#define VB_UMC 0x4000 -#define VB_NoLCD 0x8000 -#define VB_SIS30xB (VB_SIS301B | VB_SIS301C | VB_SIS302B | VB_SIS307T) -#define VB_SIS30xC (VB_SIS301C | VB_SIS307T) -#define VB_SISTMDS (VB_SIS301 | VB_SIS301B | VB_SIS301C | VB_SIS302B | VB_SIS307T) -#define VB_SISLVDS (VB_SIS301LV | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) -#define VB_SIS30xBLV (VB_SIS30xB | VB_SISLVDS) -#define VB_SIS30xCLV (VB_SIS30xC | VB_SIS302ELV | VB_SIS307LV) -#define VB_SISVB (VB_SIS301 | VB_SIS30xBLV) -#define VB_SISLCDA (VB_SIS302B | VB_SIS301C | VB_SIS307T | VB_SISLVDS) -#define VB_SISTMDSLCDA (VB_SIS301C | VB_SIS307T) -#define VB_SISPART4SCALER (VB_SIS301C | VB_SIS307T | VB_SIS302ELV | VB_SIS307LV) -#define VB_SISHIVISION (VB_SIS301 | VB_SIS301B | VB_SIS302B) -#define VB_SISYPBPR (VB_SIS301C | VB_SIS307T | VB_SIS301LV | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) -#define VB_SISTAP4SCALER (VB_SIS301C | VB_SIS307T | VB_SIS302ELV | VB_SIS307LV) -#define VB_SISPART4OVERFLOW (VB_SIS301C | VB_SIS307T | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) -#define VB_SISPWD (VB_SIS301C | VB_SIS307T | VB_SISLVDS) -#define VB_SISEMI (VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) -#define VB_SISPOWER (VB_SIS301C | VB_SIS307T | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) -#define VB_SISDUALLINK (VB_SIS302LV | VB_SIS302ELV | VB_SIS307T | VB_SIS307LV) -#define VB_SISVGA2 VB_SISTMDS -#define VB_SISRAMDAC202 (VB_SIS301C | VB_SIS307T) - -/* VBInfo */ -#define SetSimuScanMode 0x0001 /* CR 30 */ -#define SwitchCRT2 0x0002 -#define SetCRT2ToAVIDEO 0x0004 -#define SetCRT2ToSVIDEO 0x0008 -#define SetCRT2ToSCART 0x0010 -#define SetCRT2ToLCD 0x0020 -#define SetCRT2ToRAMDAC 0x0040 -#define SetCRT2ToHiVision 0x0080 /* for SiS bridge */ -#define SetCRT2ToCHYPbPr SetCRT2ToHiVision /* for Chrontel */ -#define SetNTSCTV 0x0000 /* CR 31 */ -#define SetPALTV 0x0100 /* Deprecated here, now in TVMode */ -#define SetInSlaveMode 0x0200 -#define SetNotSimuMode 0x0400 -#define SetNotSimuTVMode SetNotSimuMode -#define SetDispDevSwitch 0x0800 -#define SetCRT2ToYPbPr525750 0x0800 -#define LoadDACFlag 0x1000 -#define DisableCRT2Display 0x2000 -#define DriverMode 0x4000 -#define HotKeySwitch 0x8000 -#define SetCRT2ToLCDA 0x8000 - -/* v-- Needs change in sis_vga.c if changed (GPIO) --v */ -#define SetCRT2ToTV (SetCRT2ToYPbPr525750|SetCRT2ToHiVision|SetCRT2ToSCART|SetCRT2ToSVIDEO|SetCRT2ToAVIDEO) -#define SetCRT2ToTVNoYPbPrHiVision (SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO) -#define SetCRT2ToTVNoHiVision (SetCRT2ToYPbPr525750 | SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO) - -/* SiS_ModeType */ -#define ModeText 0x00 -#define ModeCGA 0x01 -#define ModeEGA 0x02 -#define ModeVGA 0x03 -#define Mode15Bpp 0x04 -#define Mode16Bpp 0x05 -#define Mode24Bpp 0x06 -#define Mode32Bpp 0x07 - -#define ModeTypeMask 0x07 -#define IsTextMode 0x07 - -#define DACInfoFlag 0x0018 -#define MemoryInfoFlag 0x01E0 -#define MemorySizeShift 5 - -/* modeflag */ -#define Charx8Dot 0x0200 -#define LineCompareOff 0x0400 -#define CRT2Mode 0x0800 -#define HalfDCLK 0x1000 -#define NoSupportSimuTV 0x2000 -#define NoSupportLCDScale 0x4000 /* SiS bridge: No scaling possible (no matter what panel) */ -#define DoubleScanMode 0x8000 - -/* Infoflag */ -#define SupportTV 0x0008 -#define SupportTV1024 0x0800 -#define SupportCHTV 0x0800 -#define Support64048060Hz 0x0800 /* Special for 640x480 LCD */ -#define SupportHiVision 0x0010 -#define SupportYPbPr750p 0x1000 -#define SupportLCD 0x0020 -#define SupportRAMDAC2 0x0040 /* All (<= 100Mhz) */ -#define SupportRAMDAC2_135 0x0100 /* All except DH (<= 135Mhz) */ -#define SupportRAMDAC2_162 0x0200 /* B, C (<= 162Mhz) */ -#define SupportRAMDAC2_202 0x0400 /* C (<= 202Mhz) */ -#define InterlaceMode 0x0080 -#define SyncPP 0x0000 -#define HaveWideTiming 0x2000 /* Have specific wide- and non-wide timing */ -#define SyncPN 0x4000 -#define SyncNP 0x8000 -#define SyncNN 0xc000 - -/* SetFlag */ -#define ProgrammingCRT2 0x0001 -#define LowModeTests 0x0002 -/* #define TVSimuMode 0x0002 - deprecated */ -/* #define RPLLDIV2XO 0x0004 - deprecated */ -#define LCDVESATiming 0x0008 -#define EnableLVDSDDA 0x0010 -#define SetDispDevSwitchFlag 0x0020 -#define CheckWinDos 0x0040 -#define SetDOSMode 0x0080 - -/* TVMode flag */ -#define TVSetPAL 0x0001 -#define TVSetNTSCJ 0x0002 -#define TVSetPALM 0x0004 -#define TVSetPALN 0x0008 -#define TVSetCHOverScan 0x0010 -#define TVSetYPbPr525i 0x0020 /* new 0x10 */ -#define TVSetYPbPr525p 0x0040 /* new 0x20 */ -#define TVSetYPbPr750p 0x0080 /* new 0x40 */ -#define TVSetHiVision 0x0100 /* new 0x80; = 1080i, software-wise identical */ -#define TVSetTVSimuMode 0x0200 /* new 0x200, prev. 0x800 */ -#define TVRPLLDIV2XO 0x0400 /* prev 0x1000 */ -#define TVSetNTSC1024 0x0800 /* new 0x100, prev. 0x2000 */ -#define TVSet525p1024 0x1000 /* TW */ -#define TVAspect43 0x2000 -#define TVAspect169 0x4000 -#define TVAspect43LB 0x8000 - -/* YPbPr flag (>=315, <661; converted to TVMode) */ -#define YPbPr525p 0x0001 -#define YPbPr750p 0x0002 -#define YPbPr525i 0x0004 -#define YPbPrHiVision 0x0008 -#define YPbPrModeMask (YPbPr750p | YPbPr525p | YPbPr525i | YPbPrHiVision) - -/* SysFlags (to identify special versions) */ -#define SF_Is651 0x0001 -#define SF_IsM650 0x0002 -#define SF_Is652 0x0004 -#define SF_IsM652 0x0008 -#define SF_IsM653 0x0010 -#define SF_IsM661 0x0020 -#define SF_IsM741 0x0040 -#define SF_IsM760 0x0080 -#define SF_760UMA 0x4000 /* 76x: We have UMA */ -#define SF_760LFB 0x8000 /* 76x: We have LFB */ - -/* CR32 (Newer 630, and 315 series) - - [0] VB connected with CVBS - [1] VB connected with SVHS - [2] VB connected with SCART - [3] VB connected with LCD - [4] VB connected with CRT2 (secondary VGA) - [5] CRT1 monitor is connected - [6] VB connected with Hi-Vision TV - [7] <= 330: VB connected with DVI combo connector - >= 661: VB connected to YPbPr -*/ - -/* CR35 (300 series only) */ -#define TVOverScan 0x10 -#define TVOverScanShift 4 - -/* CR35 (661 series only) - [0] 1 = PAL, 0 = NTSC - [1] 1 = NTSC-J (if D0 = 0) - [2] 1 = PALM (if D0 = 1) - [3] 1 = PALN (if D0 = 1) - [4] 1 = Overscan (Chrontel only) - [7:5] (only if D2 in CR38 is set) - 000 525i - 001 525p - 010 750p - 011 1080i (or HiVision on 301, 301B) -*/ - -/* CR37 - [0] Set 24/18 bit (0/1) RGB to LVDS/TMDS transmitter (set by BIOS) - [3:1] External chip - 300 series: - 001 SiS301 (never seen) - 010 LVDS - 011 LVDS + Tumpion Zurac - 100 LVDS + Chrontel 7005 - 110 Chrontel 7005 - 315/330 series - 001 SiS30x (never seen) - 010 LVDS - 011 LVDS + Chrontel 7019 - 660 series [2:1] only: - reserved (chip type now in CR38) - All other combinations reserved - [3] 661 only: Pass 1:1 data - [4] LVDS: 0: Panel Link expands / 1: Panel Link does not expand - 30x: 0: Bridge scales / 1: Bridge does not scale = Panel scales (if possible) - [5] LCD polarity select - 0: VESA DMT Standard - 1: EDID 2.x defined - [6] LCD horizontal polarity select - 0: High active - 1: Low active - [7] LCD vertical polarity select - 0: High active - 1: Low active -*/ - -/* CR37: LCDInfo */ -#define LCDRGB18Bit 0x0001 -#define LCDNonExpanding 0x0010 -#define LCDSync 0x0020 -#define LCDPass11 0x0100 /* 0: center screen, 1: Pass 1:1 data */ -#define LCDDualLink 0x0200 - -#define DontExpandLCD LCDNonExpanding -#define LCDNonExpandingShift 4 -#define DontExpandLCDShift LCDNonExpandingShift -#define LCDSyncBit 0x00e0 -#define LCDSyncShift 6 - -/* CR38 (315 series) */ -#define EnableDualEdge 0x01 -#define SetToLCDA 0x02 /* LCD channel A (301C/302B/30x(E)LV and 650+LVDS only) */ -#define EnableCHScart 0x04 /* Scart on Ch7019 (unofficial definition - TW) */ -#define EnableCHYPbPr 0x08 /* YPbPr on Ch7019 (480i HDTV); only on 650/Ch7019 systems */ -#define EnableSiSYPbPr 0x08 /* Enable YPbPr mode (30xLV/301C only) */ -#define EnableYPbPr525i 0x00 /* Enable 525i YPbPr mode (30xLV/301C only) (mask 0x30) */ -#define EnableYPbPr525p 0x10 /* Enable 525p YPbPr mode (30xLV/301C only) (mask 0x30) */ -#define EnableYPbPr750p 0x20 /* Enable 750p YPbPr mode (30xLV/301C only) (mask 0x30) */ -#define EnableYPbPr1080i 0x30 /* Enable 1080i YPbPr mode (30xLV/301C only) (mask 0x30) */ -#define EnablePALM 0x40 /* 1 = Set PALM */ -#define EnablePALN 0x80 /* 1 = Set PALN */ -#define EnableNTSCJ EnablePALM /* Not BIOS */ - -/* CR38 (661 and later) - D[7:5] 000 No VB - 001 301 series VB - 010 LVDS - 011 Chrontel 7019 - 100 Conexant - D2 Enable YPbPr output (see CR35) - D[1:0] LCDA (like before) -*/ - -#define EnablePALMN 0x40 /* Romflag: 1 = Allow PALM/PALN */ - -/* CR39 (650 only) */ -#define LCDPass1_1 0x01 /* 0: center screen, 1: pass 1:1 data output */ -#define Enable302LV_DualLink 0x04 /* 302LV only; enable dual link */ - -/* CR39 (661 and later) - D[7] LVDS (SiS or third party) - D[1:0] YPbPr Aspect Ratio - 00 4:3 letterbox - 01 4:3 - 10 16:9 - 11 4:3 -*/ - -/* CR3B (651+301C) - D[1:0] YPbPr Aspect Ratio - ? -*/ - -/* CR79 (315/330 series only; not 661 and later) - [3-0] Notify driver - 0001 Mode Switch event (set by BIOS) - 0010 Epansion On/Off event - 0011 TV UnderScan/OverScan event - 0100 Set Brightness event - 0101 Set Contrast event - 0110 Set Mute event - 0111 Set Volume Up/Down event - [4] Enable Backlight Control by BIOS/driver - (set by driver; set means that the BIOS should - not touch the backlight registers because eg. - the driver already switched off the backlight) - [5] PAL/NTSC (set by BIOS) - [6] Expansion On/Off (set by BIOS; copied to CR32[4]) - [7] TV UnderScan/OverScan (set by BIOS) -*/ - -/* CR7C - 661 and later - [7] DualEdge enabled (or: to be enabled) - [6] CRT2 = TV/LCD/VGA enabled (or: to be enabled) - [5] Init done (set at end of SiS_Init) - {4] LVDS LCD capabilities - [3] LVDS LCD capabilities - [2] LVDS LCD capabilities (PWD) - [1] LVDS LCD capabilities (PWD) - [0] LVDS=1, TMDS=0 (SiS or third party) -*/ - -/* CR7E - 661 and later - VBType: - [7] LVDS (third party) - [3] 301C - [2] 302LV - [1] 301LV - [0] 301B -*/ - -/* LCDResInfo */ -#define Panel300_800x600 0x01 /* CR36 */ -#define Panel300_1024x768 0x02 -#define Panel300_1280x1024 0x03 -#define Panel300_1280x960 0x04 -#define Panel300_640x480 0x05 -#define Panel300_1024x600 0x06 -#define Panel300_1152x768 0x07 -#define Panel300_1280x768 0x0a -#define Panel300_Custom 0x0f -#define Panel300_Barco1366 0x10 - -#define Panel310_800x600 0x01 -#define Panel310_1024x768 0x02 -#define Panel310_1280x1024 0x03 -#define Panel310_640x480 0x04 -#define Panel310_1024x600 0x05 -#define Panel310_1152x864 0x06 -#define Panel310_1280x960 0x07 -#define Panel310_1152x768 0x08 /* LVDS only */ -#define Panel310_1400x1050 0x09 -#define Panel310_1280x768 0x0a -#define Panel310_1600x1200 0x0b -#define Panel310_320x240_2 0x0c /* xSTN */ -#define Panel310_320x240_3 0x0d /* xSTN */ -#define Panel310_320x240_1 0x0e /* xSTN - This is fake, can be any */ -#define Panel310_Custom 0x0f - -#define Panel661_800x600 0x01 -#define Panel661_1024x768 0x02 -#define Panel661_1280x1024 0x03 -#define Panel661_640x480 0x04 -#define Panel661_1024x600 0x05 -#define Panel661_1152x864 0x06 -#define Panel661_1280x960 0x07 -#define Panel661_1280x854 0x08 -#define Panel661_1400x1050 0x09 -#define Panel661_1280x768 0x0a -#define Panel661_1600x1200 0x0b -#define Panel661_1280x800 0x0c -#define Panel661_1680x1050 0x0d -#define Panel661_1280x720 0x0e -#define Panel661_Custom 0x0f - -#define Panel_800x600 0x01 /* Unified values */ -#define Panel_1024x768 0x02 /* MUST match BIOS values from 0-e */ -#define Panel_1280x1024 0x03 -#define Panel_640x480 0x04 -#define Panel_1024x600 0x05 -#define Panel_1152x864 0x06 -#define Panel_1280x960 0x07 -#define Panel_1152x768 0x08 /* LVDS only */ -#define Panel_1400x1050 0x09 -#define Panel_1280x768 0x0a /* 30xB/C and LVDS only (BIOS: all) */ -#define Panel_1600x1200 0x0b -#define Panel_1280x800 0x0c /* 661etc (TMDS) */ -#define Panel_1680x1050 0x0d /* 661etc */ -#define Panel_1280x720 0x0e /* 661etc */ -#define Panel_Custom 0x0f /* MUST BE 0x0f (for DVI DDC detection) */ -#define Panel_320x240_1 0x10 /* SiS 550 xSTN */ -#define Panel_Barco1366 0x11 -#define Panel_848x480 0x12 -#define Panel_320x240_2 0x13 /* SiS 550 xSTN */ -#define Panel_320x240_3 0x14 /* SiS 550 xSTN */ -#define Panel_1280x768_2 0x15 /* 30xLV */ -#define Panel_1280x768_3 0x16 /* (unused) */ -#define Panel_1280x800_2 0x17 /* 30xLV */ -#define Panel_856x480 0x18 -#define Panel_1280x854 0x19 /* 661etc */ - -/* Index in ModeResInfo table */ -#define SIS_RI_320x200 0 -#define SIS_RI_320x240 1 -#define SIS_RI_320x400 2 -#define SIS_RI_400x300 3 -#define SIS_RI_512x384 4 -#define SIS_RI_640x400 5 -#define SIS_RI_640x480 6 -#define SIS_RI_800x600 7 -#define SIS_RI_1024x768 8 -#define SIS_RI_1280x1024 9 -#define SIS_RI_1600x1200 10 -#define SIS_RI_1920x1440 11 -#define SIS_RI_2048x1536 12 -#define SIS_RI_720x480 13 -#define SIS_RI_720x576 14 -#define SIS_RI_1280x960 15 -#define SIS_RI_800x480 16 -#define SIS_RI_1024x576 17 -#define SIS_RI_1280x720 18 -#define SIS_RI_856x480 19 -#define SIS_RI_1280x768 20 -#define SIS_RI_1400x1050 21 -#define SIS_RI_1152x864 22 /* Up to here SiS conforming */ -#define SIS_RI_848x480 23 -#define SIS_RI_1360x768 24 -#define SIS_RI_1024x600 25 -#define SIS_RI_1152x768 26 -#define SIS_RI_768x576 27 -#define SIS_RI_1360x1024 28 -#define SIS_RI_1680x1050 29 -#define SIS_RI_1280x800 30 -#define SIS_RI_1920x1080 31 -#define SIS_RI_960x540 32 -#define SIS_RI_960x600 33 -#define SIS_RI_1280x854 34 - -/* CR5F */ -#define IsM650 0x80 - -/* Timing data */ -#define NTSCHT 1716 -#define NTSC2HT 1920 -#define NTSCVT 525 -#define PALHT 1728 -#define PALVT 625 -#define StHiTVHT 892 -#define StHiTVVT 1126 -#define StHiTextTVHT 1000 -#define StHiTextTVVT 1126 -#define ExtHiTVHT 2100 -#define ExtHiTVVT 1125 - -/* Indices in (VB)VCLKData tables */ - -#define VCLK28 0x00 /* Index in VCLKData table (300 and 315) */ -#define VCLK40 0x04 /* Index in VCLKData table (300 and 315) */ -#define VCLK65_300 0x09 /* Index in VCLKData table (300) */ -#define VCLK108_2_300 0x14 /* Index in VCLKData table (300) */ -#define VCLK81_300 0x3f /* Index in VCLKData table (300) */ -#define VCLK108_3_300 0x42 /* Index in VCLKData table (300) */ -#define VCLK100_300 0x43 /* Index in VCLKData table (300) */ -#define VCLK34_300 0x3d /* Index in VCLKData table (300) */ -#define VCLK_CUSTOM_300 0x47 - -#define VCLK65_315 0x0b /* Indices in (VB)VCLKData table (315) */ -#define VCLK108_2_315 0x19 -#define VCLK81_315 0x5b -#define VCLK162_315 0x5e -#define VCLK108_3_315 0x45 -#define VCLK100_315 0x46 -#define VCLK34_315 0x55 -#define VCLK68_315 0x0d -#define VCLK_1280x800_315_2 0x5c -#define VCLK121_315 0x5d -#define VCLK130_315 0x72 -#define VCLK_1280x720 0x5f -#define VCLK_1280x768_2 0x60 -#define VCLK_1280x768_3 0x61 /* (unused?) */ -#define VCLK_CUSTOM_315 0x62 -#define VCLK_1280x720_2 0x63 -#define VCLK_720x480 0x67 -#define VCLK_720x576 0x68 -#define VCLK_768x576 0x68 -#define VCLK_848x480 0x65 -#define VCLK_856x480 0x66 -#define VCLK_800x480 0x65 -#define VCLK_1024x576 0x51 -#define VCLK_1152x864 0x64 -#define VCLK_1360x768 0x58 -#define VCLK_1280x800_315 0x6c -#define VCLK_1280x854 0x76 - -#define TVCLKBASE_300 0x21 /* Indices on TV clocks in VCLKData table (300) */ -#define TVCLKBASE_315 0x3a /* Indices on TV clocks in (VB)VCLKData table (315) */ -#define TVVCLKDIV2 0x00 /* Index relative to TVCLKBASE */ -#define TVVCLK 0x01 /* Index relative to TVCLKBASE */ -#define HiTVVCLKDIV2 0x02 /* Index relative to TVCLKBASE */ -#define HiTVVCLK 0x03 /* Index relative to TVCLKBASE */ -#define HiTVSimuVCLK 0x04 /* Index relative to TVCLKBASE */ -#define HiTVTextVCLK 0x05 /* Index relative to TVCLKBASE */ -#define YPbPr750pVCLK 0x25 /* Index relative to TVCLKBASE; was 0x0f NOT relative */ - -/* ------------------------------ */ - -#define SetSCARTOutput 0x01 - -#define HotPlugFunction 0x08 - -#define StStructSize 0x06 - -#define SIS_VIDEO_CAPTURE 0x00 - 0x30 -#define SIS_VIDEO_PLAYBACK 0x02 - 0x30 -#define SIS_CRT2_PORT_04 0x04 - 0x30 -#define SIS_CRT2_PORT_10 0x10 - 0x30 -#define SIS_CRT2_PORT_12 0x12 - 0x30 -#define SIS_CRT2_PORT_14 0x14 - 0x30 - -#define ADR_CRT2PtrData 0x20E -#define offset_Zurac 0x210 /* TW: Trumpion Zurac data pointer */ -#define ADR_LVDSDesPtrData 0x212 -#define ADR_LVDSCRT1DataPtr 0x214 -#define ADR_CHTVVCLKPtr 0x216 -#define ADR_CHTVRegDataPtr 0x218 - -#define LCDDataLen 8 -#define HiTVDataLen 12 -#define TVDataLen 16 - -#define LVDSDataLen 6 -#define LVDSDesDataLen 3 -#define ActiveNonExpanding 0x40 -#define ActiveNonExpandingShift 6 -#define ActivePAL 0x20 -#define ActivePALShift 5 -#define ModeSwitchStatus 0x0F -#define SoftTVType 0x40 -#define SoftSettingAddr 0x52 -#define ModeSettingAddr 0x53 - -#define _PanelType00 0x00 -#define _PanelType01 0x08 -#define _PanelType02 0x10 -#define _PanelType03 0x18 -#define _PanelType04 0x20 -#define _PanelType05 0x28 -#define _PanelType06 0x30 -#define _PanelType07 0x38 -#define _PanelType08 0x40 -#define _PanelType09 0x48 -#define _PanelType0A 0x50 -#define _PanelType0B 0x58 -#define _PanelType0C 0x60 -#define _PanelType0D 0x68 -#define _PanelType0E 0x70 -#define _PanelType0F 0x78 - -#define PRIMARY_VGA 0 /* 1: SiS is primary vga 0:SiS is secondary vga */ - -#define BIOSIDCodeAddr 0x235 /* Offsets to ptrs in BIOS image */ -#define OEMUtilIDCodeAddr 0x237 -#define VBModeIDTableAddr 0x239 -#define OEMTVPtrAddr 0x241 -#define PhaseTableAddr 0x243 -#define NTSCFilterTableAddr 0x245 -#define PALFilterTableAddr 0x247 -#define OEMLCDPtr_1Addr 0x249 -#define OEMLCDPtr_2Addr 0x24B -#define LCDHPosTable_1Addr 0x24D -#define LCDHPosTable_2Addr 0x24F -#define LCDVPosTable_1Addr 0x251 -#define LCDVPosTable_2Addr 0x253 -#define OEMLCDPIDTableAddr 0x255 - -#define VBModeStructSize 5 -#define PhaseTableSize 4 -#define FilterTableSize 4 -#define LCDHPosTableSize 7 -#define LCDVPosTableSize 5 -#define OEMLVDSPIDTableSize 4 -#define LVDSHPosTableSize 4 -#define LVDSVPosTableSize 6 - -#define VB_ModeID 0 -#define VB_TVTableIndex 1 -#define VB_LCDTableIndex 2 -#define VB_LCDHIndex 3 -#define VB_LCDVIndex 4 - -#define OEMLCDEnable 0x0001 -#define OEMLCDDelayEnable 0x0002 -#define OEMLCDPOSEnable 0x0004 -#define OEMTVEnable 0x0100 -#define OEMTVDelayEnable 0x0200 -#define OEMTVFlickerEnable 0x0400 -#define OEMTVPhaseEnable 0x0800 -#define OEMTVFilterEnable 0x1000 - -#define OEMLCDPanelIDSupport 0x0080 - -/* - ============================================================= - for 315 series (old data layout) - ============================================================= -*/ -#define SoftDRAMType 0x80 -#define SoftSetting_OFFSET 0x52 -#define SR07_OFFSET 0x7C -#define SR15_OFFSET 0x7D -#define SR16_OFFSET 0x81 -#define SR17_OFFSET 0x85 -#define SR19_OFFSET 0x8D -#define SR1F_OFFSET 0x99 -#define SR21_OFFSET 0x9A -#define SR22_OFFSET 0x9B -#define SR23_OFFSET 0x9C -#define SR24_OFFSET 0x9D -#define SR25_OFFSET 0x9E -#define SR31_OFFSET 0x9F -#define SR32_OFFSET 0xA0 -#define SR33_OFFSET 0xA1 - -#define CR40_OFFSET 0xA2 -#define SR25_1_OFFSET 0xF6 -#define CR49_OFFSET 0xF7 - -#define VB310Data_1_2_Offset 0xB6 -#define VB310Data_4_D_Offset 0xB7 -#define VB310Data_4_E_Offset 0xB8 -#define VB310Data_4_10_Offset 0xBB - -#define RGBSenseDataOffset 0xBD -#define YCSenseDataOffset 0xBF -#define VideoSenseDataOffset 0xC1 -#define OutputSelectOffset 0xF3 - -#define ECLK_MCLK_DISTANCE 0x14 -#define VBIOSTablePointerStart 0x100 -#define StandTablePtrOffset VBIOSTablePointerStart+0x02 -#define EModeIDTablePtrOffset VBIOSTablePointerStart+0x04 -#define CRT1TablePtrOffset VBIOSTablePointerStart+0x06 -#define ScreenOffsetPtrOffset VBIOSTablePointerStart+0x08 -#define VCLKDataPtrOffset VBIOSTablePointerStart+0x0A -#define MCLKDataPtrOffset VBIOSTablePointerStart+0x0E -#define CRT2PtrDataPtrOffset VBIOSTablePointerStart+0x10 -#define TVAntiFlickPtrOffset VBIOSTablePointerStart+0x12 -#define TVDelayPtr1Offset VBIOSTablePointerStart+0x14 -#define TVPhaseIncrPtr1Offset VBIOSTablePointerStart+0x16 -#define TVYFilterPtr1Offset VBIOSTablePointerStart+0x18 -#define LCDDelayPtr1Offset VBIOSTablePointerStart+0x20 -#define TVEdgePtr1Offset VBIOSTablePointerStart+0x24 -#define CRT2Delay1Offset VBIOSTablePointerStart+0x28 - -#endif |